linux.git/drivers/phy/ti, branch vsnprintf Linux kernel source tree Merge tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy 2024-11-27T21:33:43+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-11-27T21:33:43+00:00 0ce9a5ffca7cb74efe6e981e42f82d0838fd31cd Pull phy updates from Vinod Koul: "New hardware support: - ST STM32MP25 combophy support - Sparx5 support for lan969x serdes and updates to driver to support this - NXP PTN3222 eUSB2 to USB2 redriver - Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2 support, X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP UFS PHY support and SA8775P eDP PHY support - Rockchip rk3576 usbdp and rk3576 usb2 phy support - Binding for Microchip ATA6561 can phy Updates: - Freescale driver updates from hdmi support - Conversion of rockchip rk3228 hdmi phy binding to yaml - Broadcom usb2-phy deprecated support dropped and USB init array update for BCM4908 - TI USXGMII mode support in J7200 - Switch back to platform_driver::remove() subsystem update" * tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (59 commits) phy: qcom: qmp: Fix lecacy-legacy typo phy: lan969x-serdes: add support for lan969x serdes driver dt-bindings: phy: sparx5: document lan969x phy: sparx5-serdes: add support for branching on chip type phy: sparx5-serdes: add indirection layer to register macros phy: sparx5-serdes: add function for getting the CMU index phy: sparx5-serdes: add ops to match data phy: sparx5-serdes: add constant for the number of CMU's phy: sparx5-serdes: add constants to match data phy: sparx5-serdes: add support for private match data phy: bcm-ns-usb2: drop support for old binding variant dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300 dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561 phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll() phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l() phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out() phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL ... 
Pull phy updates from Vinod Koul:
 "New hardware support:

   - ST STM32MP25 combophy support

   - Sparx5 support for lan969x serdes and updates to driver to support
     this

   - NXP PTN3222 eUSB2 to USB2 redriver

   - Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2
     support, X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP
     UFS PHY support and SA8775P eDP PHY support

   - Rockchip rk3576 usbdp and rk3576 usb2 phy support

   - Binding for Microchip ATA6561 can phy

  Updates:

   - Freescale driver updates from hdmi support

   - Conversion of rockchip rk3228 hdmi phy binding to yaml

   - Broadcom usb2-phy deprecated support dropped and USB init array
     update for BCM4908

   - TI USXGMII mode support in J7200

   - Switch back to platform_driver::remove() subsystem update"

* tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (59 commits)
  phy: qcom: qmp: Fix lecacy-legacy typo
  phy: lan969x-serdes: add support for lan969x serdes driver
  dt-bindings: phy: sparx5: document lan969x
  phy: sparx5-serdes: add support for branching on chip type
  phy: sparx5-serdes: add indirection layer to register macros
  phy: sparx5-serdes: add function for getting the CMU index
  phy: sparx5-serdes: add ops to match data
  phy: sparx5-serdes: add constant for the number of CMU's
  phy: sparx5-serdes: add constants to match data
  phy: sparx5-serdes: add support for private match data
  phy: bcm-ns-usb2: drop support for old binding variant
  dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant
  dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300
  dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible
  dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561
  phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions
  phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll()
  phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l()
  phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out()
  phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL
  ...
phy: Switch back to struct platform_driver::remove() 2024-10-17T15:03:03+00:00 Uwe Kleine-König u.kleine-koenig@baylibre.com 2024-10-09T06:53:07+00:00 54234e3a69324c900715ccd8e0e17e7eb1bb47cd After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/phy/ to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. While touching these files, make indention of the struct initializer consistent in several files. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20241009065307.504930-2-u.kleine-koenig@baylibre.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/phy/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

While touching these files, make indention of the struct initializer
consistent in several files.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241009065307.504930-2-u.kleine-koenig@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: ti: phy-j721e-wiz: fix usxgmii configuration 2024-10-17T14:53:02+00:00 Siddharth Vadapalli s-vadapalli@ti.com 2024-10-12T05:39:37+00:00 b4b32423b6ee6bb96e19fd82bcfd372f6192c737 Commit b64a85fb8f53 ("phy: ti: phy-j721e-wiz.c: Add usxgmii support in wiz driver") added support for USXGMII mode. In doing so, P0_REFCLK_SEL was set to "pcs_mac_clk_divx1_ln_0" (0x3) and P0_STANDARD_MODE was set to LANE_MODE_GEN1, which results in a data rate of 5.15625 Gbps. However, since the USXGMII mode can support up to 10.3125 Gbps data rate, the aforementioned fields should be set to "pcs_mac_clk_divx0_ln_0" (0x2) and LANE_MODE_GEN2 respectively. The signal corresponding to the USXGMII lane of the SERDES has been measured as 5 Gbps without the change and 10 Gbps with the change. Hence, fix the configuration accordingly to support USXGMII up to 10G. Fixes: b64a85fb8f53 ("phy: ti: phy-j721e-wiz.c: Add usxgmii support in wiz driver") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20241012053937.3596885-1-s-vadapalli@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Commit b64a85fb8f53 ("phy: ti: phy-j721e-wiz.c: Add usxgmii support in
wiz driver") added support for USXGMII mode. In doing so, P0_REFCLK_SEL
was set to "pcs_mac_clk_divx1_ln_0" (0x3) and P0_STANDARD_MODE was set to
LANE_MODE_GEN1, which results in a data rate of 5.15625 Gbps. However,
since the USXGMII mode can support up to 10.3125 Gbps data rate, the
aforementioned fields should be set to "pcs_mac_clk_divx0_ln_0" (0x2) and
LANE_MODE_GEN2 respectively. The signal corresponding to the USXGMII lane
of the SERDES has been measured as 5 Gbps without the change and 10 Gbps
with the change. Hence, fix the configuration accordingly to support
USXGMII up to 10G.

Fixes: b64a85fb8f53 ("phy: ti: phy-j721e-wiz.c: Add usxgmii support in wiz driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241012053937.3596885-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: ti: gmii-sel: Enable USXGMII mode for J7200 2024-10-11T08:29:44+00:00 Siddharth Vadapalli s-vadapalli@ti.com 2024-10-10T14:48:45+00:00 9e544d46a2d11a0cb8b30d8ad4409c59bc168ce2 TI's J7200 SoC supports USXGMII mode with the CPSW5G instance's MAC Port1. Add USXGMII mode to the extra_modes member of J7200's SoC data. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20241010144845.2555983-1-s-vadapalli@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
TI's J7200 SoC supports USXGMII mode with the CPSW5G instance's MAC Port1.
Add USXGMII mode to the extra_modes member of J7200's SoC data.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241010144845.2555983-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Merge tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy 2024-09-23T21:05:10+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-09-23T21:05:10+00:00 fbb86b0d5f38184873772a84ae50d5edd6a8b046 Pull phy updates from Vinod Koul: "New hw support: - Rcar usb2 support for RZ/G3S SoC - Nuvoton MA35 SoC USB 2.0 PHY driver Removed: - obsolete qcom,usb-8x16-phy bindings Updates: - 4 lane PCIe support for Qualcomm X1E80100 - Constify structure in subsystem update - Subsystem simplification with scoped for each OF child loop update - Yaml conversion for Qualcomm sata phy, Hiilicon hi3798cv200-combphy bindings" * tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits) phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings phy: renesas: rcar-gen3-usb2: Add support to initialize the bus phy: ti: j721e-wiz: Simplify with scoped for each OF child loop phy: ti: j721e-wiz: Drop OF node reference earlier for simpler code phy: ti: gmii-sel: Simplify with dev_err_probe() phy: ti: am654-serdes: Use scoped device node handling to simplify error paths phy: qcom: qmp-pcie-msm8996: Simplify with scoped for each OF child loop phy: mediatek: xsphy: Simplify with scoped for each OF child loop phy: mediatek: tphy: Simplify with scoped for each OF child loop phy: hisilicon: usb2: Simplify with scoped for each OF child loop phy: cadence: sierra: Simplify with scoped for each OF child loop phy: broadcom: brcm-sata: Simplify with scoped for each OF child loop phy: broadcom: bcm-cygnus-pcie: Simplify with scoped for each OF child loop phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings phy: qcom: qmp-pcie: Configure all tables on port B PHY phy: airoha: adjust initialization delay in airoha_pcie_phy_init() dt-bindings: phy: socionext,uniphier: add top-level constraints phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100 ... 
Pull phy updates from Vinod Koul:
 "New hw support:
   - Rcar usb2 support for RZ/G3S SoC
   - Nuvoton MA35 SoC USB 2.0 PHY driver

  Removed:
   - obsolete qcom,usb-8x16-phy bindings

  Updates:
   - 4 lane PCIe support for Qualcomm X1E80100
   - Constify structure in subsystem update
   - Subsystem simplification with scoped for each OF child loop update
   - Yaml conversion for Qualcomm sata phy, Hiilicon hi3798cv200-combphy
     bindings"

* tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits)
  phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC
  dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings
  phy: renesas: rcar-gen3-usb2: Add support to initialize the bus
  phy: ti: j721e-wiz: Simplify with scoped for each OF child loop
  phy: ti: j721e-wiz: Drop OF node reference earlier for simpler code
  phy: ti: gmii-sel: Simplify with dev_err_probe()
  phy: ti: am654-serdes: Use scoped device node handling to simplify error paths
  phy: qcom: qmp-pcie-msm8996: Simplify with scoped for each OF child loop
  phy: mediatek: xsphy: Simplify with scoped for each OF child loop
  phy: mediatek: tphy: Simplify with scoped for each OF child loop
  phy: hisilicon: usb2: Simplify with scoped for each OF child loop
  phy: cadence: sierra: Simplify with scoped for each OF child loop
  phy: broadcom: brcm-sata: Simplify with scoped for each OF child loop
  phy: broadcom: bcm-cygnus-pcie: Simplify with scoped for each OF child loop
  phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY
  dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings
  phy: qcom: qmp-pcie: Configure all tables on port B PHY
  phy: airoha: adjust initialization delay in airoha_pcie_phy_init()
  dt-bindings: phy: socionext,uniphier: add top-level constraints
  phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100
  ...
power: supply: Change usb_types from an array into a bitmask 2024-09-03T21:20:28+00:00 Hans de Goede hdegoede@redhat.com 2024-08-31T14:20:39+00:00 364ea7ccaef917a3068236a19a4b31a0623b561a The bit_types array just hold a list of valid enum power_supply_usb_type values which map to 0 - 9. This can easily be represented as a bitmap. This reduces the size of struct power_supply_desc and further reduces the data section size by drivers no longer needing to store the array. This also unifies how usb_types are handled with charge_behaviours, which allows power_supply_show_usb_type() to be removed. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240831142039.28830-7-hdegoede@redhat.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> 
The bit_types array just hold a list of valid enum power_supply_usb_type
values which map to 0 - 9. This can easily be represented as a bitmap.

This reduces the size of struct power_supply_desc and further reduces
the data section size by drivers no longer needing to store the array.

This also unifies how usb_types are handled with charge_behaviours,
which allows power_supply_show_usb_type() to be removed.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240831142039.28830-7-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
phy: ti: j721e-wiz: Simplify with scoped for each OF child loop 2024-08-30T07:56:38+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2024-08-26T10:07:27+00:00 0d5a213c2eae880e0f7f8bc252314bae194d68d8 Use scoped for_each_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-11-5b4d82582644@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-11-5b4d82582644@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: ti: j721e-wiz: Drop OF node reference earlier for simpler code 2024-08-30T07:56:38+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2024-08-26T10:07:26+00:00 afd7aaf3ecaf1b247db1294ef0687fb3cb530213 Drop OF node reference immediately after using it in syscon_node_to_regmap(), which is both simpler and typical/expected code pattern. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-10-5b4d82582644@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Drop OF node reference immediately after using it in
syscon_node_to_regmap(), which is both simpler and typical/expected
code pattern.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-10-5b4d82582644@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: ti: gmii-sel: Simplify with dev_err_probe() 2024-08-30T07:56:37+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2024-08-26T10:07:25+00:00 27a4046255377eb0faab5c41fd271b1acab1ac41 Use dev_err_probe() to avoid dmesg flood on actual defer. This makes the code also simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-9-5b4d82582644@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Use dev_err_probe() to avoid dmesg flood on actual defer.  This makes
the code also simpler.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-9-5b4d82582644@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: ti: am654-serdes: Use scoped device node handling to simplify error paths 2024-08-30T07:56:37+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2024-08-26T10:07:24+00:00 29b44a38503856952862c710d47d933c0173fd04 Obtain the device node reference with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Unlike in other typical of_node_get+syscon_node_to_regmap cases, the reference cannot be dropped immediately after syscon_node_to_regmap(), because further part of probe() uses it. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-8-5b4d82582644@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Obtain the device node reference with scoped/cleanup.h to reduce error
handling and make the code a bit simpler.

Unlike in other typical of_node_get+syscon_node_to_regmap cases, the
reference cannot be dropped immediately after syscon_node_to_regmap(),
because further part of probe() uses it.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-8-5b4d82582644@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>