Pull phy updates from Vinod Koul:
 "The usual bunch of device support and update to drivers.

  New Support
   - Qualcomm SM8750 QMP PCIe PHY dual lane support, PMIV0104 eusb2
     repeater support, QCS8300 eDP PHY support
   - Renesas RZ/T2H and RZ/N2H support and updates to driver for that
   - TI TCAN1051 phy support
   - Rockchip rk3588 dphy support, RK3528 combphy support

  Updates:
   - cadence updates for calibration and polling for ready and enabling
     of lower resolutions, runtime pm support,
   - Rockchip: enable U3 otg port
   - Renesas USXGMII mode support
   - Qualcomm UFS PHY and PLL regulator load support"

* tag 'phy-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (64 commits)
  phy: rockchip: phy-rockchip-inno-csidphy: add support for rk3588 variant
  phy: rockchip: phy-rockchip-inno-csidphy: allow for different reset lines
  phy: rockchip: phy-rockchip-inno-csidphy: allow writes to grf register 0
  dt-bindings: phy: rockchip-inno-csi-dphy: add rk3588 variant
  dt-bindings: phy: rockchip-inno-csi-dphy: make power-domains non-required
  phy: cadence: cdns-dphy: Enable lower resolutions in dphy
  phy: renesas: r8a779f0-ether-serdes: add new step added to latest datasheet
  phy: renesas: r8a779f0-ether-serdes: add USXGMII mode
  phy: sophgo: Add USB 2.0 PHY driver for Sophgo CV18XX/SG200X
  dt-bindings: phy: Add Sophgo CV1800 USB phy
  phy: cadence: cdns-dphy: Update calibration wait time for startup state machine
  phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling
  phy: renesas: rcar-gen3-usb2: Fix ID check logic with VBUS valid
  dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051
  phy: lynx-28g: check return value when calling lynx_28g_pll_get
  phy: qcom: m31-eusb2: Fix the error log while enabling clock
  phy: rockchip: usbdp: Remove redundant ternary operators
  phy: renesas: rcar-gen3-usb2: Remove redundant ternary operators
  phy: hisilicon: Remove redundant ternary operators
  phy: qcom-qmp-ufs: Add PHY and PLL regulator load
  ...

Some SoCs are just validated with the TX delay enabled. With commit
ca13b249f291 ("net: ethernet: ti: am65-cpsw: fixup PHY mode for fixed
RGMII TX delay"), the network driver will patch the delay setting on the
fly assuming that the TX delay setting is fixed. In reality, the TX
delay is configurable and just skipped in the documentation. There are
bootloaders, which will disable the TX delay and this will lead to a
transmit path which doesn't add any delays at all.
Fix that by always writing the RGMII_ID setting and report an error for
unsupported RGMII delay modes.

This is safe to do and shouldn't break any boards in mainline because
the fixed delay is only introduced for gmii-sel compatibles which are
used together with the am65-cpsw-nuss driver and also contains the
commit above.

Fixes: ca13b249f291 ("net: ethernet: ti: am65-cpsw: fixup PHY mode for fixed RGMII TX delay")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://lore.kernel.org/r/20250819065622.1019537-1-mwalle@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

When using MMIO with regmap, fast_io is implied. No need to set it
again.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250813161517.4746-13-wsa+renesas@sang-engineering.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Since commit 4fd06af96b93 ("usb: phy: omap-control: Get rid of platform
data") the driver only supports OF probe so drop the unused platform
module alias.

Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724154823.15998-12-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

The driver has never supported anything but OF probe so drop the unused
platform module alias.

Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724154823.15998-11-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Since commit 918ee0d21ba4 ("usb: phy: omap-usb3: Don't use
omap_get_control_dev()") the driver only supports OF probe so drop the
unused platform module alias.

Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724154823.15998-10-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Since commit 478b6c7436c2 ("usb: phy: omap-usb2: Don't use
omap_get_control_dev()") the driver only supports OF probe so drop the
unused platform module alias.

Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724154823.15998-9-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Nothing seems to prevent the driver from being built on non-TI platforms
so enable compile testing for wider build coverage.

Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724131623.2662-1-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Make sure to drop the reference to the control device taken by
of_find_device_by_node() during probe when the driver is unbound.

Fixes: 918ee0d21ba4 ("usb: phy: omap-usb3: Don't use omap_get_control_dev()")
Cc: stable@vger.kernel.org	# 3.13
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724131206.2211-4-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Make sure to drop the reference to the control device taken by
of_find_device_by_node() during probe when the driver is unbound.

Fixes: 478b6c7436c2 ("usb: phy: omap-usb2: Don't use omap_get_control_dev()")
Cc: stable@vger.kernel.org	# 3.13
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724131206.2211-3-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>