linux.git/drivers/phy/samsung, branch v5.9

Merge tag 'phy-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next

2020-07-23T07:52:10+00:00

Vinod writes:

phy for 5.9

 - New PHY Drivers:
   - Samsung UFS
   - Qcom USB DWC for ipq806x
   - Xilinx ZynqMP Gigabit Transceiver
   - Qcom USB QMP for IPQ8074
   - BCM63xx USBH

 - Removed:
   - Qcom ufs qmp phy driver

 - Updates:
   - Support for Qcom SM8250 QMP V4 USB3 UNIPHY
   - qcom-snps runtime pm support
   - Cleanup of W=1 warns in the subsystem

* tag 'phy-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (46 commits)
  phy: qualcomm: fix setting of tx_deamp_3_5db when device property read fails
  phy: bcm63xx-usbh: Add BCM63xx USBH driver
  dt-bindings: phy: add bcm63xx-usbh bindings
  phy: armada-38x: fix NETA lockup when repeatedly switching speeds
  dt: update Marvell Armada 38x COMPHY binding
  phy: samsung-ufs: Fix IS_ERR argument
  dt-bindings: phy: renesas,usb3-phy: Add r8a774e1 support
  dt-bindings: phy: renesas,usb2-phy: Add r8a774e1 support
  phy: renesas: rcar-gen3-usb2: exit if request_irq() failed
  phy: renesas: rcar-gen3-usb2: move irq registration to init
  devicetree: bindings: phy: Document ipq806x dwc3 qcom phy
  phy: qualcomm: add qcom ipq806x dwc usb phy driver
  phy: samsung-ufs: add UFS PHY driver for samsung SoC
  dt-bindings: phy: Document Samsung UFS PHY bindings
  phy: sun4i-usb: explicitly include gpio/consumer.h
  phy: stm32: use NULL instead of zero
  phy: exynos5-usbdrd: use correct format for structure description
  phy: rockchip-typec: use correct format for structure description
  phy: xgene: remove unsigned integer comparison with less than zero
  phy: mapphone-mdm6600: Add missing description for some structure fields
  ...

phy: samsung-ufs: Fix IS_ERR argument

2020-07-21T10:39:11+00:00

Fix IS_ERR argument in samsung_ufs_phy_symbol_clk_init(). The proper
argument to be passed to IS_ERR() is phy->rx1_symbol_clk.

This bug was detected with the help of Coccinelle.

Fixes: bca21e930451 ("phy: samsung-ufs: add UFS PHY driver for samsung SoC")
Signed-off-by: Gustavo A. R. Silva 
Reviewed-by: Alim Akhtar 
Link: https://lore.kernel.org/r/20200720132718.GA13413@embeddedor
Signed-off-by: Vinod Koul

phy: samsung-ufs: add UFS PHY driver for samsung SoC

2020-07-17T08:05:30+00:00

This patch introduces Samsung UFS PHY driver. This driver
supports to deal with phy calibration and power control
according to UFS host driver's behavior.

[Robot: -Wmissing-prototypes and -Wsometimes-uninitialized]
Reported-by: kernel test robot 
Reviewed-by: Kiwoong Kim 
Signed-off-by: Seungwon Jeon 
Signed-off-by: Alim Akhtar 
Cc: Kishon Vijay Abraham I 
Cc: Vinod Koul 
Tested-by: Paweł Chmiel 
Link: https://lore.kernel.org/r/20200716192217.35740-2-alim.akhtar@samsung.com
Signed-off-by: Vinod Koul

phy: exynos5-usbdrd: use correct format for structure description

2020-07-13T06:44:58+00:00

We get warning with W=1 build:
drivers/phy/samsung/phy-exynos5-usbdrd.c:211: warning: Function
parameter or member 'phys' not described in 'exynos5_usbdrd_phy'
drivers/phy/samsung/phy-exynos5-usbdrd.c:211: warning: Function
parameter or member 'vbus' not described in 'exynos5_usbdrd_phy'
drivers/phy/samsung/phy-exynos5-usbdrd.c:211: warning: Function
parameter or member 'vbus_boost' not described in 'exynos5_usbdrd_phy'

These members are provided with description but format is not quite
right resulting in above warnings

Acked-by: Marek Szyprowski 
Link: https://lore.kernel.org/r/20200708132809.265967-5-vkoul@kernel.org
Signed-off-by: Vinod Koul

phy: exynos5-usbdrd: Calibrating makes sense only for USB2.0 PHY

2020-07-13T05:13:09+00:00

PHY calibration is needed only for USB2.0 (UTMI) PHY, so skip calling
calibration code when phy_calibrate() is called for USB3.0 (PIPE3) PHY.

Fixes: d8c80bb3b55b ("phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800")
Signed-off-by: Marek Szyprowski 
Acked-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20200708133800.3336-1-m.szyprowski@samsung.com
Signed-off-by: Vinod Koul

phy: exynos: Rename Exynos to lowercase

2020-06-24T17:14:19+00:00

Fix up inconsistent usage of upper and lowercase letters in "Exynos"
name.

"EXYNOS" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.

The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.

Signed-off-by: Krzysztof Kozlowski 

Link: https://lore.kernel.org/r/20200617152803.17941-1-krzk@kernel.org
Signed-off-by: Vinod Koul

phy: samsung: Replace zero-length array with flexible-array

2020-06-16T04:08:32+00:00

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21

Signed-off-by: Gustavo A. R. Silva

phy: samsung: s5pv210-usb2: Add delay after reset

2020-05-13T02:57:35+00:00

The USB phy takes some time to reset, so make sure we give it to it. The
delay length was taken from the 4x12 phy driver.

This manifested in issues with the DWC2 driver since commit fe369e1826b3
("usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.")
where the endianness check would read the DWC ID as 0 due to the phy still
resetting, resulting in the wrong endian mode being chosen.

Signed-off-by: Jonathan Bakker 
Link: https://lore.kernel.org/r/BN6PR04MB06605D52502816E500683553A3D10@BN6PR04MB0660.namprd04.prod.outlook.com
Signed-off-by: Kishon Vijay Abraham I

Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2020-01-29T18:09:44+00:00

Pull USB/Thunderbolt/PHY driver updates from Greg KH:
 "Here is the big USB and Thunderbolt and PHY driver updates for
  5.6-rc1.

  With the advent of USB4, "Thunderbolt" has really become USB4, so the
  renaming of the Kconfig option and starting to share subsystem code
  has begun, hence both subsystems coming in through the same tree here.

  PHY driver updates also touched USB drivers, so that is coming in
  through here as well.

  Major stuff included in here are:
   - USB 4 initial support added (i.e. Thunderbolt)
   - musb driver updates
   - USB gadget driver updates
   - PHY driver updates
   - USB PHY driver updates
   - lots of USB serial stuff fixed up
   - USB typec updates
   - USB-IP fixes
   - lots of other smaller USB driver updates

  All of these have been in linux-next for a while now (the usb-serial
  tree is already tested in linux-next on its own before merged into
  here), with no reported issues"

[ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA
  that causes configuration warnings    - Linus ]

* tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
  Doc: ABI: add usb charger uevent
  usb: phy: show USB charger type for user
  usb: cdns3: fix spelling mistake and rework grammar in text
  usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
  USB: serial: cyberjack: fix spelling mistake "To" -> "Too"
  USB: serial: ir-usb: simplify endpoint check
  USB: serial: ir-usb: make set_termios synchronous
  USB: serial: ir-usb: fix IrLAP framing
  USB: serial: ir-usb: fix link-speed handling
  USB: serial: ir-usb: add missing endpoint sanity check
  usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW
  usb: typec: wcove: fix "op-sink-microwatt" default that was in mW
  usb: dwc3: pci: add ID for the Intel Comet Lake -V variant
  usb: typec: tcpci: mask event interrupts when remove driver
  usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186
  usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined
  usb: chipidea: handle single role for usb role class
  usb: musb: fix spelling mistake: "periperal" -> "peripheral"
  phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS
  USB: usbfs: Always unlink URBs in reverse order
  ...

phy: Enable compile testing for some of drivers

2020-01-06T09:35:00+00:00

Some of the phy drivers can be compile tested to increase build
coverage.

Signed-off-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20200103164710.4829-2-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman