linux.git/drivers/phy/qualcomm, branch v6.5-rc2 Linux kernel source tree phy: qcom: qmp-combo: fix Display Port PHY configuration for SM8550 2023-06-21T12:16:35+00:00 Neil Armstrong neil.armstrong@linaro.org 2023-06-01T09:39:58+00:00 6cd52a2a06774c6c454ffef084c3d9b17618ca23 The SM8550 PHY also uses a different offset for the CMN_STATUS reg, use the right one for the v6 Display Port configuration. Fixes: 49742e9edab3 ("phy: qcom-qmp-combo: Add support for SM8550") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230601-topic-sm8550-upstream-dp-phy-init-fix-v1-1-4e9da9f97991@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
The SM8550 PHY also uses a different offset for the CMN_STATUS reg,
use the right one for the v6 Display Port configuration.

Fixes: 49742e9edab3 ("phy: qcom-qmp-combo: Add support for SM8550")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230601-topic-sm8550-upstream-dp-phy-init-fix-v1-1-4e9da9f97991@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: qcom: add the SGMII SerDes PHY driver 2023-06-21T12:15:10+00:00 Bartosz Golaszewski bartosz.golaszewski@linaro.org 2023-06-19T09:13:36+00:00 601d06277007e850615b86358bf9c0a143d20faa Implement support for the SGMII/SerDes PHY present on various Qualcomm platforms. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230619091336.194914-4-brgl@bgdev.pl Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Implement support for the SGMII/SerDes PHY present on various Qualcomm
platforms.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230619091336.194914-4-brgl@bgdev.pl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: qualcomm: fix indentation in Makefile 2023-06-21T12:15:10+00:00 Bartosz Golaszewski bartosz.golaszewski@linaro.org 2023-06-19T09:13:34+00:00 37bd215fc48ef2a399f836d62d2e4a166efb31be Align all entries in Makefile. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230619091336.194914-2-brgl@bgdev.pl Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Align all entries in Makefile.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230619091336.194914-2-brgl@bgdev.pl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: qcom-qmp-combo: Introduce drm_bridge 2023-05-19T17:47:19+00:00 Bjorn Andersson quic_bjorande@quicinc.com 2023-05-15T03:27:41+00:00 1904c3f578dce06760160cc5b728c960cd7db633 The QMP combo PHY sits in an of_graph connected between the DisplayPort controller and a USB Type-C connector (or possibly a redriver). The TCPM needs to be able to convey the HPD signal to the DisplayPort controller, but no directly link is provided by DeviceTree so the signal needs to "pass through" the QMP combo phy. Handle this by introducing a drm_bridge which upon initialization finds the next bridge (i.e. the usb-c-connector) and chain this together. This way HPD changes in the connector will propagate to the DisplayPort driver. The connector bridge is resolved lazily, as the TCPM is expected to be able to resolve the typec mux and switch at probe time, so the QMP combo phy will probe before the TCPM. Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Abel Vesa <abel.vesa@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450 Tested-by: Johan Hovold <johan+linaro@kernel.org> # X13s Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Link: https://lore.kernel.org/r/20230515032743.400170-7-quic_bjorande@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
The QMP combo PHY sits in an of_graph connected between the DisplayPort
controller and a USB Type-C connector (or possibly a redriver).

The TCPM needs to be able to convey the HPD signal to the DisplayPort
controller, but no directly link is provided by DeviceTree so the signal
needs to "pass through" the QMP combo phy.

Handle this by introducing a drm_bridge which upon initialization finds
the next bridge (i.e. the usb-c-connector) and chain this together. This
way HPD changes in the connector will propagate to the DisplayPort
driver.

The connector bridge is resolved lazily, as the TCPM is expected to be
able to resolve the typec mux and switch at probe time, so the QMP combo
phy will probe before the TCPM.

Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450
Tested-by: Johan Hovold <johan+linaro@kernel.org>	# X13s
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230515032743.400170-7-quic_bjorande@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: qcom-qmp-combo: Introduce orientation switching 2023-05-19T17:47:19+00:00 Bjorn Andersson quic_bjorande@quicinc.com 2023-05-15T03:27:40+00:00 2851117f8f4218043e4c05d24494fee66e932cbe The data lanes of the QMP PHY is swapped in order to handle changing orientation of the USB Type-C cable. Register a typec_switch device to allow a TCPM to configure the orientation. The newly introduced orientation variable is adjusted based on the request, and the initialized components are brought down and up again. To keep track of what parts needs to be cycled new variables to keep track of the individual init_count is introduced. Both the USB and the DisplayPort altmode signals are properly switched. For DisplayPort the controller will after the TCPM having established orientation power on the PHY, so this is not done implicitly, but for USB the PHY typically is kept initialized across the switch, and must therefore then be reinitialized. This is based on initial work by Wesley Cheng. Link: https://lore.kernel.org/r/20201009082843.28503-3-wcheng@codeaurora.org/ Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Abel Vesa <abel.vesa@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450 Tested-by: Johan Hovold <johan+linaro@kernel.org> # X13s Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Link: https://lore.kernel.org/r/20230515032743.400170-6-quic_bjorande@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
The data lanes of the QMP PHY is swapped in order to handle changing
orientation of the USB Type-C cable. Register a typec_switch device to
allow a TCPM to configure the orientation.

The newly introduced orientation variable is adjusted based on the
request, and the initialized components are brought down and up again.
To keep track of what parts needs to be cycled new variables to keep
track of the individual init_count is introduced.

Both the USB and the DisplayPort altmode signals are properly switched.
For DisplayPort the controller will after the TCPM having established
orientation power on the PHY, so this is not done implicitly, but for
USB the PHY typically is kept initialized across the switch, and must
therefore then be reinitialized.

This is based on initial work by Wesley Cheng.

Link: https://lore.kernel.org/r/20201009082843.28503-3-wcheng@codeaurora.org/
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450
Tested-by: Johan Hovold <johan+linaro@kernel.org>	# X13s
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230515032743.400170-6-quic_bjorande@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: qcom-qmp-combo: Introduce orientation variable 2023-05-19T17:47:19+00:00 Bjorn Andersson quic_bjorande@quicinc.com 2023-05-15T03:27:39+00:00 815891eee668795deea07f5d1eb43e0d6089c930 In multiple places throughout the driver code has been written in prepration for handling of orientation switching. Introduce a typec_orientation in qmp_combo and fill out the various "placeholders" with the associated logic. By initializing the orientation to "normal" this change has no functional impact, but reduces the size of the upcoming introduction of dynamic orientation switching. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Abel Vesa <abel.vesa@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450 Tested-by: Johan Hovold <johan+linaro@kernel.org> # X13s Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Link: https://lore.kernel.org/r/20230515032743.400170-5-quic_bjorande@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
In multiple places throughout the driver code has been written in
prepration for handling of orientation switching.

Introduce a typec_orientation in qmp_combo and fill out the various
"placeholders" with the associated logic. By initializing the
orientation to "normal" this change has no functional impact, but
reduces the size of the upcoming introduction of dynamic orientation
switching.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450
Tested-by: Johan Hovold <johan+linaro@kernel.org>	# X13s
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230515032743.400170-5-quic_bjorande@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: qcom-qmp-combo: Extend phy_mutex to all phy_ops 2023-05-19T17:47:19+00:00 Bjorn Andersson quic_bjorande@quicinc.com 2023-05-15T03:27:38+00:00 77cbca3a12d3b9501973bdecd28f28b5c2184bf2 The phy core ensures mutual exclusion across the ops for a given phy, but the upcoming introduction of USB Type-C orientation switching might race with the DisplayPort phy operations. So extend the mutual exclusion to cover the remaining ops as well, to avoid concurrent reconfiguration of the hardware. Reported-by: Johan Hovold <johan@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Link: https://lore.kernel.org/r/20230515032743.400170-4-quic_bjorande@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
The phy core ensures mutual exclusion across the ops for a given phy,
but the upcoming introduction of USB Type-C orientation switching might
race with the DisplayPort phy operations. So extend the mutual exclusion
to cover the remaining ops as well, to avoid concurrent reconfiguration
of the hardware.

Reported-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230515032743.400170-4-quic_bjorande@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: qcom-qmp-combo: Move phy_mutex out of com_init/exit 2023-05-19T17:47:19+00:00 Bjorn Andersson quic_bjorande@quicinc.com 2023-05-15T03:27:37+00:00 02545aa31008e1f4fb6875cdd13c415ddf95a24c With the upcoming introduction of USB Type-C orientation switching the region of mutual exclusion needs to be extended to cover both the common init/exit as well as the individual functions. So move the phy_mutex one step up the stack. Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Abel Vesa <abel.vesa@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450 Tested-by: Johan Hovold <johan+linaro@kernel.org> # X13s Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Link: https://lore.kernel.org/r/20230515032743.400170-3-quic_bjorande@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
With the upcoming introduction of USB Type-C orientation switching the
region of mutual exclusion needs to be extended to cover both the common
init/exit as well as the individual functions.

So move the phy_mutex one step up the stack.

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450
Tested-by: Johan Hovold <johan+linaro@kernel.org>	# X13s
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230515032743.400170-3-quic_bjorande@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Merge branch 'fixes' into next 2023-05-19T17:46:43+00:00 Vinod Koul vkoul@kernel.org 2023-05-19T17:46:43+00:00 940797d6d53fb5ce2f83b3fa56dd47a66ee912a4 This brings in the Qcom qmp patch fixes into next as well 
This brings in the Qcom qmp patch fixes into next as well
phy: qcom-qmp-usb: add support for updated qcm2290 / sm6115 binding 2023-05-17T08:14:02+00:00 Bhupesh Sharma bhupesh.sharma@linaro.org 2023-05-16T15:05:09+00:00 1178c93c0ab70f8f758b529ef40386e1a3cc5646 Add support for the new qcm2290 / sm6115 binding. The USB QMP phy on these devices supports 2 lanes. Note that the binding now does not describe every register subregion and instead the driver holds the corresponding offsets. While at it also include support for PCS_MISC region which was left out earlier. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20230516150511.2346357-3-bhupesh.sharma@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Add support for the new qcm2290 / sm6115 binding.

The USB QMP phy on these devices supports 2 lanes. Note that the
binding now does not describe every register subregion and instead
the driver holds the corresponding offsets.

While at it also include support for PCS_MISC region which was left
out earlier.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20230516150511.2346357-3-bhupesh.sharma@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>