Pull char/misc driver updates from Greg KH:
 "Here is the big set of char and misc and other tiny driver subsystem
  updates for 5.16-rc1.

  Loads of things in here, all of which have been in linux-next for a
  while with no reported problems (except for one called out below.)

  Included are:

   - habanana labs driver updates, including dma_buf usage, reviewed and
     acked by the dma_buf maintainers

   - iio driver update (going through this tree not staging as they
     really do not belong going through that tree anymore)

   - counter driver updates

   - hwmon driver updates that the counter drivers needed, acked by the
     hwmon maintainer

   - xillybus driver updates

   - binder driver updates

   - extcon driver updates

   - dma_buf module namespaces added (will cause a build error in arm64
     for allmodconfig, but that change is on its way through the drm
     tree)

   - lkdtm driver updates

   - pvpanic driver updates

   - phy driver updates

   - virt acrn and nitr_enclaves driver updates

   - smaller char and misc driver updates"

* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits)
  comedi: dt9812: fix DMA buffers on stack
  comedi: ni_usb6501: fix NULL-deref in command paths
  arm64: errata: Enable TRBE workaround for write to out-of-range address
  arm64: errata: Enable workaround for TRBE overwrite in FILL mode
  coresight: trbe: Work around write to out of range
  coresight: trbe: Make sure we have enough space
  coresight: trbe: Add a helper to determine the minimum buffer size
  coresight: trbe: Workaround TRBE errata overwrite in FILL mode
  coresight: trbe: Add infrastructure for Errata handling
  coresight: trbe: Allow driver to choose a different alignment
  coresight: trbe: Decouple buffer base from the hardware base
  coresight: trbe: Add a helper to pad a given buffer area
  coresight: trbe: Add a helper to calculate the trace generated
  coresight: trbe: Defer the probe on offline CPUs
  coresight: trbe: Fix incorrect access of the sink specific data
  coresight: etm4x: Add ETM PID for Kryo-5XX
  coresight: trbe: Prohibit trace before disabling TRBE
  coresight: trbe: End the AUX handle on truncation
  coresight: trbe: Do not truncate buffer on IRQ
  coresight: trbe: Fix handling of spurious interrupts
  ...

This converts users of mdiobus to mdiodev using the following semantic
patch:

@@
identifier mdiodev;
expression regnum;
@@

- mdiobus_read(mdiodev->bus, mdiodev->addr, regnum)
+ mdiodev_read(mdiodev, regnum)

@@
identifier mdiodev;
expression regnum, val;
@@

- mdiobus_write(mdiodev->bus, mdiodev->addr, regnum, val)
+ mdiodev_write(mdiodev, regnum, val)

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adding a configuration menu to hold many Broadcom phy drivers
helps to make the menu display more concise.

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210923025013.189-1-caihuoqing@baidu.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Vinod writes:

phy-for-5.14 version 2

  - Updates:
        - Yaml conversion for renesas,rcar-gen3 pcie phy and
          rockchip-usb-phy bindings
        - Support for devm_phy_get() taking NULL phy name

  - New support:
        - PCIe phy for Qualcomm IPQ60xx
        - PCIe phy for Qualcomm SDX55
        - USB phy for RK3308
        - CAN transceivers phy for TI TCAN104x
        - Innosilicon-based CSI dphy for rockchip

* tag 'phy-for-5.14_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (36 commits)
  phy: Revert "phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'"
  phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe()
  phy: uniphier-pcie: Fix updating phy parameters
  phy/rockchip: add Innosilicon-based CSI dphy
  dt-bindings: phy: add yaml binding for rockchip-inno-csi-dphy
  phy: rockchip: remove redundant initialization of pointer cfg
  phy: phy-can-transceiver: Add support for generic CAN transceiver driver
  dt-bindings: phy: Add binding for TI TCAN104x CAN transceivers
  phy: core: Reword the comment specifying the units of max_link_rate to be Mbps
  phy: phy-mtk-hdmi: Remove redundant dev_err call in mtk_hdmi_phy_probe()
  phy: phy-mtk-mipi-dsi: Remove redundant dev_err call in mtk_mipi_tx_probe()
  phy: phy-mmp3-hsic: Remove redundant dev_err call in mmp3_hsic_phy_probe()
  phy: bcm-ns-usb3: Remove redundant dev_err call in bcm_ns_usb3_mdio_probe()
  MAINTAINERS: update marvell,armada-3700-utmi-phy.yaml reference
  phy: phy-twl4030-usb: use DEVICE_ATTR_RO macro
  dt-bindings: phy: convert rockchip-usb-phy.txt to YAML
  phy: phy-rockchip-inno-usb2: add support for RK3308 USB phy
  dt-bindings: phy: rockchip-inno-usb2: add compatible for rk3308 USB phy
  phy: stm32: manage optional vbus regulator on phy_power_on/off
  dt-bindings: phy: add vbus-supply optional property to phy-stm32-usbphyc
  ...

There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Link: https://lore.kernel.org/r/20210408090808.247368-1-heying24@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

While IS_ENABLED() is perfectly fine for CONFIG_* symbols, it is not
for other symbols such as __BIG_ENDIAN that is provided directly by
the compiler.

Switch to use CONFIG_CPU_BIG_ENDIAN instead of __BIG_ENDIAN.

Signed-off-by: Chen Li <chenli@uniontech.com>
Reviewed-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: 94583a41047e ("phy: usb: Restructure in preparation for adding 7216 USB support")
Link: https://lore.kernel.org/r/87czuggpra.wl-chenli@uniontech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy-brcm-usb has some conditional init code required on selected brcmstb
devices. Execution of that code depends on family / product detected by
brcmstb soc code.

For ARCH_BCM4908 brcmstb soc code always return 0 values as ids. Don't
bother selecting & compiling that redundant driver.

Depends-on: 149ae80b1d50 ("soc: bcm: brcmstb: add stubs for getting platform IDs")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210305152406.2588-1-zajec5@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Vinod writes:

phy: second round of phy fixes for v5.11

 - rockchip: init return and vednor prefix to dt-property
 - cpcap: bool conversion fix
 - lantiq: clock enable fix
 - lgm: kconfig depends on x86
 - mediatek: add mising MODULE_DEVICE_TABLE()

* tag 'phy-fixes2-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: mediatek: Add missing MODULE_DEVICE_TABLE()
  phy: phy-brcm-sata: remove unneeded semicolon
  phy: USB_LGM_PHY should depend on X86
  phy: lantiq: rcu-usb2: wait after clock enable
  phy: rockchip: emmc, add vendor prefix to dts properties
  devicetree: phy: rockchip-emmc optional add vendor prefix
  phy: cpcap-usb: remove unneeded conversion to bool
  phy: rockchip-emmc: emmc_phy_init() always return 0

Eliminate the following coccicheck warning:
./drivers/phy/broadcom/phy-brcm-sata.c:654:2-3: Unneeded semicolon

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1612321087-14743-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

BCM4908 seems to have slightly different registers but works when
programmed just like the STB one.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210106205838.10964-3-zajec5@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>