linux.git/drivers/phy/broadcom/Kconfig, branch v5.18

phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option

2022-01-23T14:03:28+00:00

The previous commit 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on
the BCM4908") added a second "default" line for ARCH_BCM_4908 above
the original "default" line for ARCH_BRCMSTB. When two "default"
lines are used, only the first is used and this change stopped
the PHY_BRCM_USB option for being enabled for ARCH_BRCMSTB.
The fix is to use one "default line with "||".

Fixes: 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908")
Signed-off-by: Al Cooper 
Acked-by: Rafał Miłecki 
Acked-by: Florian Fainelli 
Link: https://lore.kernel.org/r/20211201180653.35097-4-alcooperx@gmail.com
Signed-off-by: Vinod Koul

phy: broadcom: Kconfig: Add configuration menu for Broadcom phy drivers

2021-10-01T08:20:38+00:00

Adding a configuration menu to hold many Broadcom phy drivers
helps to make the menu display more concise.

Signed-off-by: Cai Huoqing 
Acked-by: Florian Fainelli 
Link: https://lore.kernel.org/r/20210923025013.189-1-caihuoqing@baidu.com
Signed-off-by: Vinod Koul

phy: phy-brcm-usb: select SOC_BRCMSTB on brcmstb only

2021-03-15T10:28:24+00:00

phy-brcm-usb has some conditional init code required on selected brcmstb
devices. Execution of that code depends on family / product detected by
brcmstb soc code.

For ARCH_BCM4908 brcmstb soc code always return 0 values as ids. Don't
bother selecting & compiling that redundant driver.

Depends-on: 149ae80b1d50 ("soc: bcm: brcmstb: add stubs for getting platform IDs")
Signed-off-by: Rafał Miłecki 
Acked-by: Florian Fainelli 
Link: https://lore.kernel.org/r/20210305152406.2588-1-zajec5@gmail.com
Signed-off-by: Vinod Koul

phy: phy-brcm-usb: support PHY on the BCM4908

2021-01-13T14:15:40+00:00

BCM4908 seems to have slightly different registers but works when
programmed just like the STB one.

Signed-off-by: Rafał Miłecki 
Acked-by: Florian Fainelli 
Link: https://lore.kernel.org/r/20210106205838.10964-3-zajec5@gmail.com
Signed-off-by: Vinod Koul

phy: bcm63xx-usbh: Add BCM63xx USBH driver

2020-07-21T17:29:58+00:00

Add BCM63xx USBH PHY driver for BMIPS.

Signed-off-by: Álvaro Fernández Rojas 
Signed-off-by: Simon Arlott 
Link: https://lore.kernel.org/r/20200720131209.1236590-3-noltari@gmail.com
Signed-off-by: Vinod Koul

phy: Enable compile testing for some of drivers

2020-01-06T09:35:00+00:00

Some of the phy drivers can be compile tested to increase build
coverage.

Signed-off-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20200103164710.4829-2-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

phy: sr-usb: Add Stingray USB PHY driver

2019-04-17T08:42:48+00:00

USB PHY driver supports two types of stingray USB PHYs
 - Type 1 is a combo PHY contains two PHYs, one SS and one HS.
 - Type 2 is a single HS PHY.

These two PHY versons support both Generic xHCI host controller driver
and BDC Broadcom device controller driver.

Signed-off-by: Srinath Mannam 
Signed-off-by: Kishon Vijay Abraham I

phy: brcm-sata: allow PHY_BRCM_SATA driver to be built for DSL SoCs

2018-09-25T10:40:08+00:00

Broadcom ARM-based DSL SoCs (BCM63xx product line) have the same
Broadcom SATA PHY that other SoCs are using, make it possible to select
that driver on these platforms.

Signed-off-by: Florian Fainelli 
Signed-off-by: Kishon Vijay Abraham I

phy: bcm-sr-pcie: Add Stingray PCIe PHY driver

2018-07-10T08:15:10+00:00

Add Stingray PCIe PHY driver for both PAXB and PAXC root complex

Signed-off-by: Ray Jui 
Signed-off-by: Kishon Vijay Abraham I