linux.git/drivers/phy/Kconfig, branch v3.16-rc2

phy: Add new Exynos5 USB 3.0 PHY driver

2014-05-13T12:37:08+00:00

Add a new driver for the USB 3.0 PHY on Exynos5 series of SoCs.
The new driver uses the generic PHY framework and will interact
with DWC3 controller present on Exynos5 series of SoCs.

Also, created a new header file in linux/mfd/syscon/ for
Exynos5 SoCs and put the required PMU offset definitions
for the basic available PHYs.

Signed-off-by: Vivek Gautam 
Signed-off-by: Kishon Vijay Abraham I

phy: kona2: use 'select GENERIC_PHY' in Kconfig

2014-05-12T13:32:02+00:00

All other phy drivers use 'select', while this one is
the only one to use 'depends on'. This is not a bug, just
slightly inconsistent, so let's change it to do things the
same way as everyone else.

We may also want to turn GENERIC_PHY into a silent option
that only ever gets turned on if another driver needs it.

Signed-off-by: Arnd Bergmann 
Cc: Kishon Vijay Abraham I 
Cc: Matt Porter 
Cc: Felipe Balbi 
Signed-off-by: Kishon Vijay Abraham I

phy: restore OMAP_CONTROL_PHY dependencies

2014-04-24T19:53:38+00:00

When OMAP_CONTROL_USB was renamed to OMAP_CONTROL_PHY (commit
14da699b), its dependencies were lost in the process. Nothing in the
commit message indicates that this removal was intentional, so I think
it was by accident and the dependencies should be restored.

Signed-off-by: Jean Delvare 
Acked-by: Roger Quadros 
Cc: Felipe Balbi 
Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2014-04-05T22:37:40+00:00

Pull ARM SoC driver changes from Arnd Bergmann:
 "These changes are mostly for ARM specific device drivers that either
  don't have an upstream maintainer, or that had the maintainer ask us
  to pick up the changes to avoid conflicts.

  A large chunk of this are clock drivers (bcm281xx, exynos, versatile,
  shmobile), aside from that, reset controllers for STi as well as a
  large rework of the Marvell Orion/EBU watchdog driver are notable"

* tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac."
  Revert "net: stmmac: Add SOCFPGA glue driver"
  ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks
  ARM: STi: Add reset controller support to mach-sti Kconfig
  drivers: reset: stih416: add softreset controller
  drivers: reset: stih415: add softreset controller
  drivers: reset: Reset controller driver for STiH416
  drivers: reset: Reset controller driver for STiH415
  drivers: reset: STi SoC system configuration reset controller support
  dts: socfpga: Add sysmgr node so the gmac can use to reference
  dts: socfpga: Add support for SD/MMC on the SOCFPGA platform
  reset: Add optional resets and stubs
  ARM: shmobile: r7s72100: fix bus clock calculation
  Power: Reset: Generalize qnap-poweroff to work on Synology devices.
  dts: socfpga: Update clock entry to support multiple parents
  ARM: socfpga: Update socfpga_defconfig
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  net: stmmac: Add SOCFPGA glue driver
  watchdog: orion_wdt: Use %pa to print 'phys_addr_t'
  drivers: cci: Export CCI PMU revision
  ...

PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver

2014-03-09T07:15:13+00:00

This patch adds support for the APM X-Gene SoC 15Gbps Multi-purpose PHY.
This is the physical layer interface for the corresponding host
controller. Currently, only external clock and Gen3 SATA mode
are supported.

Signed-off-by: Loc Ho 
Signed-off-by: Tuan Phan 
Signed-off-by: Suman Tripathi 
Signed-off-by: Kishon Vijay Abraham I

phy: omap: Depend on OMAP_OCP2SCP bus driver

2014-03-09T07:15:12+00:00

The OMAP_USB2 and OMAP_PIPE3 PHY devices will not be
detected if the OMAP_OCP2SCP bus driver is not present.
Make them depend on it.

Signed-off-by: Roger Quadros 
Signed-off-by: Kishon Vijay Abraham I

phy: rename struct omap_control_usb to struct omap_control_phy

2014-03-09T07:15:08+00:00

Rename struct omap_control_usb to struct omap_control_phy since it can
be used to control PHY of USB, SATA and PCIE. Also move the driver and
include files under *phy* and made the corresponding changes in the users
of phy-omap-control.

Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Roger Quadros 
Acked-by: Felipe Balbi

phy: Add Exynos 5250 support to the Exynos USB 2.0 PHY driver

2014-03-08T07:09:44+00:00

Add support for Exynos 5250. This driver is to replace the old
USB 2.0 PHY driver.

Signed-off-by: Kamil Debski 
Signed-off-by: Kishon Vijay Abraham I

phy: Add new Exynos USB 2.0 PHY driver

2014-03-08T07:09:44+00:00

Add a new driver for the Exynos USB 2.0 PHY. The new driver uses the generic
PHY framework. The driver includes support for the Exynos 4x10 and 4x12
SoC families.

Signed-off-by: Kamil Debski 
Reviewed-by: Tomasz Figa 
Signed-off-by: Kishon Vijay Abraham I

drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework

2014-03-06T09:19:33+00:00

Adapted omap-usb3 PHY driver to Generic PHY Framework and moved phy-omap-usb3
driver in drivers/usb/phy to drivers/phy and also renamed the file to
phy-ti-pipe3 since this same driver will be used for SATA PHY and
PCIE PHY.

Signed-off-by: Kishon Vijay Abraham I