Pull ACPI updates from Rafael Wysocki:
 "From the new features standpoint, the most significant change here is
  the addition of CSI-2 and MIPI DisCo for Imaging support to the ACPI
  device enumeration code that will allow MIPI cameras to be enumerated
  through the platform firmware on systems using ACPI.

  Also significant is the switch-over to threaded interrupt handlers for
  the ACPI SCI and the dedicated EC interrupt (on systems where the
  former is not used) which essentially allows all ACPI code to run with
  local interrupts enabled. That should improve responsiveness
  significantly on systems where multiple GPEs are enabled and the
  handling of one SCI involves many I/O address space accesses which
  previously had to be carried out in one go with disabled interrupts on
  the local CPU.

  Apart from the above, the ACPI thermal zone driver will use the
  Thermal fast Sampling Period (_TFP) object if available, which should
  allow temperature changes to be followed more accurately on some
  systems, the ACPI Notify () handlers can run on all CPUs (not just on
  CPU0), which should generally speed up the processing of events
  signaled through the ACPI SCI, and the ACPI power button driver will
  trigger wakeup key events via the input subsystem (on systems where it
  is a system wakeup device)

  In addition to that, there are the usual bunch of fixes and cleanups.

  Specifics:

   - Add CSI-2 and DisCo for Imaging support to the ACPI device
     enumeration code (Sakari Ailus, Rafael J. Wysocki)

   - Adjust the cpufreq thermal reduction algorithm in the ACPI
     processor driver for Tegra241 (Srikar Srimath Tirumala, Arnd
     Bergmann)

   - Make acpi_proc_quirk_mwait_check() x86-specific (Rafael J. Wysocki)

   - Switch over ACPI to using a threaded interrupt handler for the SCI
     (Rafael J. Wysocki)

   - Allow ACPI Notify () handlers to run on all CPUs and clean up the
     ACPI interface for deferred events processing (Rafael J. Wysocki)

   - Switch over the ACPI EC driver to using a threaded handler for the
     dedicated IRQ on systems without the EC GPE (Rafael J. Wysocki)

   - Adjust code using ACPICA spinlocks and the ACPI EC driver spinlock
     to keep local interrupts on (Rafael J. Wysocki)

   - Adjust the USB4 _OSC handshake to correctly handle cases in which
     certain types of OS control are denied by the platform (Mika
     Westerberg)

   - Correct and clean up the generic function for parsing ACPI
     data-only tables with array structure (Yuntao Wang)

   - Modify acpi_dev_uid_match() to support different types of its
     second argument and adjust its users accordingly (Raag Jadav)

   - Clean up code related to acpi_evaluate_reference() and ACPI device
     lists (Rafael J. Wysocki)

   - Use generic ACPI helpers for evaluating trip point temperature
     objects in the ACPI thermal zone driver (Rafael J. Wysockii, Arnd
     Bergmann)

   - Add Thermal fast Sampling Period (_TFP) support to the ACPI thermal
     zone driver (Jeff Brasen)

   - Modify the ACPI LPIT table handling code to avoid u32
     multiplication overflows in state residency computations (Nikita
     Kiryushin)

   - Drop an unused helper function from the ACPI backlight (video)
     driver and add a clarifying comment to it (Hans de Goede)

   - Update the ACPI backlight driver to avoid using uninitialized
     memory in some cases (Nikita Kiryushin)

   - Add ACPI backlight quirk for the Colorful X15 AT 23 laptop (Yuluo
     Qiu)

   - Add support for vendor-defined error types to the ACPI APEI error
     injection code (Avadhut Naik)

   - Adjust APEI to properly set MF_ACTION_REQUIRED on synchronous
     memory failure events, so they are handled differently from the
     asynchronous ones (Shuai Xue)

   - Fix NULL pointer dereference check in the ACPI extlog driver
     (Prarit Bhargava)

   - Adjust the ACPI extlog driver to clear the Extended Error Log
     status when RAS_CEC handled the error (Tony Luck)

   - Add IRQ override quirks for some Infinity laptops and for TongFang
     GMxXGxx (David McFarland, Hans de Goede)

   - Clean up the ACPI NUMA code and fix it to ensure that fake_pxm is
     not the same as one of the real pxm values (Yuntao Wang)

   - Fix the fractional clock divider flags in the ACPI LPSS (Intel SoC)
     driver so as to prevent miscalculation of the values in the clock
     divider (Andy Shevchenko)

   - Adjust comments in the ACPI watchdog driver to prevent kernel-doc
     from complaining during documentation builds (Randy Dunlap)

   - Make the ACPI button driver send wakeup key events to user space in
     addition to power button events on systems that can be woken up by
     the power button (Ken Xue)

   - Adjust pnpacpi_parse_allocated_vendor() to use memcpy() on a full
     structure field (Dmitry Antipov)"

* tag 'acpi-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits)
  ACPI: resource: Add Infinity laptops to irq1_edge_low_force_override
  ACPI: button: trigger wakeup key events
  ACPI: resource: Add another DMI match for the TongFang GMxXGxx
  ACPI: EC: Use a spin lock without disabing interrupts
  ACPI: EC: Use a threaded handler for dedicated IRQ
  ACPI: OSL: Use spin locks without disabling interrupts
  ACPI: APEI: set memory failure flags as MF_ACTION_REQUIRED on synchronous events
  ACPI: utils: Introduce helper for _DEP list lookup
  ACPI: utils: Fix white space in struct acpi_handle_list definition
  ACPI: utils: Refine acpi_handle_list_equal() slightly
  ACPI: utils: Return bool from acpi_evaluate_reference()
  ACPI: utils: Rearrange in acpi_evaluate_reference()
  ACPI: arm64: export acpi_arch_thermal_cpufreq_pctg()
  ACPI: extlog: Clear Extended Error Log status when RAS_CEC handled the error
  ACPI: LPSS: Fix the fractional clock divider flags
  ACPI: NUMA: Fix the logic of getting the fake_pxm value
  ACPI: NUMA: Optimize the check for the availability of node values
  ACPI: NUMA: Remove unnecessary check in acpi_parse_gi_affinity()
  ACPI: watchdog: fix kernel-doc warnings
  ACPI: extlog: fix NULL pointer dereference check
  ...

Merge in arm64 fixes queued for 6.7 so that kpti_install_ng_mappings()
can be updated to use arm64_kernel_unmapped_at_el0() instead of checking
the ARM64_UNMAP_KERNEL_AT_EL0 CPU capability directly.

* for-next/fixes:
  arm64: mm: Always make sw-dirty PTEs hw-dirty in pte_modify
  perf/arm-cmn: Fail DTC counter allocation correctly
  arm64: Avoid enabling KPTI unnecessarily

Merge ACPI utility functions updates for 6.8-rc1:

 - Modify acpi_dev_uid_match() to support different types of its second
   argument and adjust its users accordingly (Raag Jadav).

 - Clean up code related to acpi_evaluate_reference() and ACPI device
   lists (Rafael J. Wysocki).

* acpi-utils:
  ACPI: utils: Introduce helper for _DEP list lookup
  ACPI: utils: Fix white space in struct acpi_handle_list definition
  ACPI: utils: Refine acpi_handle_list_equal() slightly
  ACPI: utils: Return bool from acpi_evaluate_reference()
  ACPI: utils: Rearrange in acpi_evaluate_reference()
  perf: arm_cspmu: drop redundant acpi_dev_uid_to_integer()
  efi: dev-path-parser: use acpi_dev_uid_match() for matching _UID
  ACPI: LPSS: use acpi_dev_uid_match() for matching _UID
  ACPI: bus: update acpi_dev_hid_uid_match() to support multiple types
  ACPI: bus: update acpi_dev_uid_match() to support multiple types

This commit adds the PCIe Performance Monitoring Unit (PMU) driver support
for T-Head Yitian SoC chip. Yitian is based on the Synopsys PCI Express
Core controller IP which provides statistics feature. The PMU is a PCIe
configuration space register block provided by each PCIe Root Port in a
Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
injection, and Statistics).

To facilitate collection of statistics the controller provides the
following two features for each Root Port:

- one 64-bit counter for Time Based Analysis (RX/TX data throughput and
  time spent in each low-power LTSSM state) and
- one 32-bit counter for Event Counting (error and non-error events for
  a specified lane)

Note: There is no interrupt for counter overflow.

This driver adds PMU devices for each PCIe Root Port. And the PMU device is
named based the BDF of Root Port. For example,

    30:03.0 PCI bridge: Device 1ded:8000 (rev 01)

the PMU device name for this Root Port is dwc_rootport_3018.

Example usage of counting PCIe RX TLP data payload (Units of bytes)::

    $# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/

average RX bandwidth can be calculated like this:

    PCIe TX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window

Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20231208025652.87192-5-xueshuai@linux.alibaba.com
[will: Fix sparse error due to use of uninitialised 'vsec' symbol in
 dwc_pcie_match_des_cap()]
Signed-off-by: Will Deacon <will@kernel.org>

This reverts commit a5f4ca68f348ac059efd6a3d7ad4040aed1c0818.

Pulling in the Arm-specific 'linux/perf/arm_pmu.h' header breaks the
allmodconfig build for x86:

> In file included from drivers/perf/arm_dmc620_pmu.c:26:
> include/linux/perf/arm_pmu.h:15:10: fatal error: asm/cputype.h: No such file or directory
>    15 | #include <asm/cputype.h>
>       |          ^~~~~~~~~~~~~~~

Just put things back like they were so that the driver can continue to
be compile-tested on a variety of architectures.

Link: https://lore.kernel.org/r/20231213100931.12d9d85e@canb.auug.org.au
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Will Deacon <will@kernel.org>

Calling arm_cmn_event_clear() before all DTC indices are allocated is
wrong, and can lead to arm_cmn_event_add() erroneously clearing live
counters from full DTCs where allocation fails. Since the DTC counters
are only updated by arm_cmn_init_counter() after all DTC and DTM
allocations succeed, nothing actually needs cleaning up in this case
anyway, and it should just return directly as it did before.

Fixes: 7633ec2c262f ("perf/arm-cmn: Rework DTC counters (again)")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/ed589c0d8e4130dc68b8ad1625226d28bdc185d4.1702322847.git.robin.murphy@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

FEAT_PMUv3_TH (Armv8.8) permits a PMU counter to increment only on
events whose count meets a specified threshold condition. For example if
PMEVTYPERn.TC (Threshold Control) is set to 0b101 (Greater than or
equal, count), and the threshold is set to 2, then the PMU counter will
now only increment by 1 when an event would have previously incremented
the PMU counter by 2 or more on a single processor cycle.

Three new Perf event config fields, 'threshold', 'threshold_compare' and
'threshold_count' have been added to control the feature.
threshold_compare maps to the upper two bits of PMEVTYPERn.TC and
threshold_count maps to the first bit of TC. These separate attributes
have been picked rather than enumerating all the possible combinations
of the TC field as in the Arm ARM. The attributes would be used on a
Perf command line like this:

  $ perf stat -e stall_slot/threshold=2,threshold_compare=2/

A new capability for reading out the maximum supported threshold value
has also been added:

  $ cat /sys/bus/event_source/devices/armv8_pmuv3/caps/threshold_max

  0x000000ff

If a threshold higher than threshold_max is provided, then an error is
generated. If FEAT_PMUv3_TH isn't implemented or a 32 bit kernel is
running, then threshold_max reads zero, and attempting to set a
threshold value will also result in an error.

The threshold is per PMU counter, and there are potentially different
threshold_max values per PMU type on heterogeneous systems.

Bits higher than 32 now need to be written into PMEVTYPER, so
armv8pmu_write_evtype() has to be updated to take an unsigned long value
rather than u32 which gives the correct behavior on both aarch32 and 64.

Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20231211161331.1277825-11-james.clark@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

-EPERM or -EINVAL always get converted to -EOPNOTSUPP, so replace them.
This will allow __hw_perf_event_init() to return a different code or not
print that particular message for a different error in the next commit.

Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20231211161331.1277825-10-james.clark@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

These were copied from the SPE driver, but now they're in the arm_pmu.h
header so delete them and use the header instead.

Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20231211161331.1277825-8-james.clark@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

This mechanism makes it much easier to define and read new attributes
so move it to the arm_pmu.h header so that it can be shared. At the same
time update the existing format attributes to use it.

GENMASK has to be changed to GENMASK_ULL because the config fields are
64 bits even on arm32 where this will also be used now.

Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20231211161331.1277825-7-james.clark@arm.com
Signed-off-by: Will Deacon <will@kernel.org>