linux.git/drivers/perf, branch v6.6-rc2 Linux kernel source tree Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux 2023-09-08T19:48:37+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-09-08T19:48:37+00:00 ca9c7abf9502e108fae0e34181e01b1a20bc439f Pull arm64 fixes from Will Deacon: "The main one is a fix for a broken strscpy() conversion that landed in the merge window and broke early parsing of the kernel command line. - Fix an incorrect mask in the CXL PMU driver - Fix a regression in early parsing of the kernel command line - Fix an IP checksum OoB access reported by syzbot" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: csum: Fix OoB access in IP checksum code for negative lengths arm64/sysreg: Fix broken strncpy() -> strscpy() conversion perf: CXL: fix mismatched number of counters mask 
Pull arm64 fixes from Will Deacon:
 "The main one is a fix for a broken strscpy() conversion that landed in
  the merge window and broke early parsing of the kernel command line.

   - Fix an incorrect mask in the CXL PMU driver

   - Fix a regression in early parsing of the kernel command line

   - Fix an IP checksum OoB access reported by syzbot"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: csum: Fix OoB access in IP checksum code for negative lengths
  arm64/sysreg: Fix broken strncpy() -> strscpy() conversion
  perf: CXL: fix mismatched number of counters mask
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm 2023-09-07T20:52:20+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-09-07T20:52:20+00:00 0c02183427b4d2002992f26d4917c1263c5d4a7f Pull kvm updates from Paolo Bonzini: "ARM: - Clean up vCPU targets, always returning generic v8 as the preferred target - Trap forwarding infrastructure for nested virtualization (used for traps that are taken from an L2 guest and are needed by the L1 hypervisor) - FEAT_TLBIRANGE support to only invalidate specific ranges of addresses when collapsing a table PTE to a block PTE. This avoids that the guest refills the TLBs again for addresses that aren't covered by the table PTE. - Fix vPMU issues related to handling of PMUver. - Don't unnecessary align non-stack allocations in the EL2 VA space - Drop HCR_VIRT_EXCP_MASK, which was never used... - Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu parameter instead - Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort() - Remove prototypes without implementations RISC-V: - Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest - Added ONE_REG interface for SATP mode - Added ONE_REG interface to enable/disable multiple ISA extensions - Improved error codes returned by ONE_REG interfaces - Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V - Added get-reg-list selftest for KVM RISC-V s390: - PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch) Allows a PV guest to use crypto cards. Card access is governed by the firmware and once a crypto queue is "bound" to a PV VM every other entity (PV or not) looses access until it is not bound anymore. Enablement is done via flags when creating the PV VM. - Guest debug fixes (Ilya) x86: - Clean up KVM's handling of Intel architectural events - Intel bugfixes - Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use debug registers and generate/handle #DBs - Clean up LBR virtualization code - Fix a bug where KVM fails to set the target pCPU during an IRTE update - Fix fatal bugs in SEV-ES intrahost migration - Fix a bug where the recent (architecturally correct) change to reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to skip it) - Retry APIC map recalculation if a vCPU is added/enabled - Overhaul emergency reboot code to bring SVM up to par with VMX, tie the "emergency disabling" behavior to KVM actually being loaded, and move all of the logic within KVM - Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC ratio MSR cannot diverge from the default when TSC scaling is disabled up related code - Add a framework to allow "caching" feature flags so that KVM can check if the guest can use a feature without needing to search guest CPUID - Rip out the ancient MMU_DEBUG crud and replace the useful bits with CONFIG_KVM_PROVE_MMU - Fix KVM's handling of !visible guest roots to avoid premature triple fault injection - Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the API surface that is needed by external users (currently only KVMGT), and fix a variety of issues in the process Generic: - Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass action specific data without needing to constantly update the main handlers. - Drop unused function declarations Selftests: - Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs - Add support for printf() in guest code and covert all guest asserts to use printf-based reporting - Clean up the PMU event filter test and add new testcases - Include x86 selftests in the KVM x86 MAINTAINERS entry" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits) KVM: x86/mmu: Include mmu.h in spte.h KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots KVM: x86/mmu: Disallow guest from using !visible slots for page tables KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page KVM: x86/mmu: Harden new PGD against roots without shadow pages KVM: x86/mmu: Add helper to convert root hpa to shadow page drm/i915/gvt: Drop final dependencies on KVM internal details KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers KVM: x86/mmu: Drop @slot param from exported/external page-track APIs KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled KVM: x86/mmu: Assert that correct locks are held for page write-tracking KVM: x86/mmu: Rename page-track APIs to reflect the new reality KVM: x86/mmu: Drop infrastructure for multiple page-track modes KVM: x86/mmu: Use page-track notifiers iff there are external users KVM: x86/mmu: Move KVM-only page-track declarations to internal header KVM: x86: Remove the unused page-track hook track_flush_slot() drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region() KVM: x86: Add a new page-track hook to handle memslot deletion drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot KVM: x86: Reject memslot MOVE operations if KVMGT is attached ... 
Pull kvm updates from Paolo Bonzini:
 "ARM:

   - Clean up vCPU targets, always returning generic v8 as the preferred
     target

   - Trap forwarding infrastructure for nested virtualization (used for
     traps that are taken from an L2 guest and are needed by the L1
     hypervisor)

   - FEAT_TLBIRANGE support to only invalidate specific ranges of
     addresses when collapsing a table PTE to a block PTE. This avoids
     that the guest refills the TLBs again for addresses that aren't
     covered by the table PTE.

   - Fix vPMU issues related to handling of PMUver.

   - Don't unnecessary align non-stack allocations in the EL2 VA space

   - Drop HCR_VIRT_EXCP_MASK, which was never used...

   - Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
     parameter instead

   - Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()

   - Remove prototypes without implementations

  RISC-V:

   - Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest

   - Added ONE_REG interface for SATP mode

   - Added ONE_REG interface to enable/disable multiple ISA extensions

   - Improved error codes returned by ONE_REG interfaces

   - Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V

   - Added get-reg-list selftest for KVM RISC-V

  s390:

   - PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)

     Allows a PV guest to use crypto cards. Card access is governed by
     the firmware and once a crypto queue is "bound" to a PV VM every
     other entity (PV or not) looses access until it is not bound
     anymore. Enablement is done via flags when creating the PV VM.

   - Guest debug fixes (Ilya)

  x86:

   - Clean up KVM's handling of Intel architectural events

   - Intel bugfixes

   - Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
     debug registers and generate/handle #DBs

   - Clean up LBR virtualization code

   - Fix a bug where KVM fails to set the target pCPU during an IRTE
     update

   - Fix fatal bugs in SEV-ES intrahost migration

   - Fix a bug where the recent (architecturally correct) change to
     reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
     skip it)

   - Retry APIC map recalculation if a vCPU is added/enabled

   - Overhaul emergency reboot code to bring SVM up to par with VMX, tie
     the "emergency disabling" behavior to KVM actually being loaded,
     and move all of the logic within KVM

   - Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
     TSC ratio MSR cannot diverge from the default when TSC scaling is
     disabled up related code

   - Add a framework to allow "caching" feature flags so that KVM can
     check if the guest can use a feature without needing to search
     guest CPUID

   - Rip out the ancient MMU_DEBUG crud and replace the useful bits with
     CONFIG_KVM_PROVE_MMU

   - Fix KVM's handling of !visible guest roots to avoid premature
     triple fault injection

   - Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
     API surface that is needed by external users (currently only
     KVMGT), and fix a variety of issues in the process

  Generic:

   - Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
     events to pass action specific data without needing to constantly
     update the main handlers.

   - Drop unused function declarations

  Selftests:

   - Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs

   - Add support for printf() in guest code and covert all guest asserts
     to use printf-based reporting

   - Clean up the PMU event filter test and add new testcases

   - Include x86 selftests in the KVM x86 MAINTAINERS entry"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
  KVM: x86/mmu: Include mmu.h in spte.h
  KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
  KVM: x86/mmu: Disallow guest from using !visible slots for page tables
  KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
  KVM: x86/mmu: Harden new PGD against roots without shadow pages
  KVM: x86/mmu: Add helper to convert root hpa to shadow page
  drm/i915/gvt: Drop final dependencies on KVM internal details
  KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
  KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
  KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
  KVM: x86/mmu: Assert that correct locks are held for page write-tracking
  KVM: x86/mmu: Rename page-track APIs to reflect the new reality
  KVM: x86/mmu: Drop infrastructure for multiple page-track modes
  KVM: x86/mmu: Use page-track notifiers iff there are external users
  KVM: x86/mmu: Move KVM-only page-track declarations to internal header
  KVM: x86: Remove the unused page-track hook track_flush_slot()
  drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
  KVM: x86: Add a new page-track hook to handle memslot deletion
  drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
  KVM: x86: Reject memslot MOVE operations if KVMGT is attached
  ...
perf: CXL: fix mismatched number of counters mask 2023-09-05T14:51:18+00:00 Jeongtae Park jtp.park@samsung.com 2023-09-05T12:33:09+00:00 7625df9f4b255eb9d56885e25c564d7e794c6da1 The number of Count Units field is described as 6 bits long in the CXL 3.0 specification. However, its mask value was only declared as 5 bits long. Signed-off-by: Jeongtae Park <jtp.park@samsung.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20230905123309.775854-1-jtp.park@samsung.com Signed-off-by: Will Deacon <will@kernel.org> 
The number of Count Units field is described as 6 bits long
in the CXL 3.0 specification. However, its mask value was
only declared as 5 bits long.

Signed-off-by: Jeongtae Park <jtp.park@samsung.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230905123309.775854-1-jtp.park@samsung.com
Signed-off-by: Will Deacon <will@kernel.org>
Merge tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux 2023-09-01T15:09:48+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-09-01T15:09:48+00:00 e0152e7481c6c63764d6ea8ee41af5cf9dfac5e9 Pull RISC-V updates from Palmer Dabbelt: - Support for the new "riscv,isa-extensions" and "riscv,isa-base" device tree interfaces for probing extensions - Support for userspace access to the performance counters - Support for more instructions in kprobes - Crash kernels can be allocated above 4GiB - Support for KCFI - Support for ELFs in !MMU configurations - ARCH_KMALLOC_MINALIGN has been reduced to 8 - mmap() defaults to sv48-sized addresses, with longer addresses hidden behind a hint (similar to Arm and Intel) - Also various fixes and cleanups * tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits) lib/Kconfig.debug: Restrict DEBUG_INFO_SPLIT for RISC-V riscv: support PREEMPT_DYNAMIC with static keys riscv: Move create_tmp_mapping() to init sections riscv: Mark KASAN tmp* page tables variables as static riscv: mm: use bitmap_zero() API riscv: enable DEBUG_FORCE_FUNCTION_ALIGN_64B riscv: remove redundant mv instructions RISC-V: mm: Document mmap changes RISC-V: mm: Update pgtable comment documentation RISC-V: mm: Add tests for RISC-V mm RISC-V: mm: Restrict address space for sv39,sv48,sv57 riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent riscv: allow kmalloc() caches aligned to the smallest value riscv: support the elf-fdpic binfmt loader binfmt_elf_fdpic: support 64-bit systems riscv: Allow CONFIG_CFI_CLANG to be selected riscv/purgatory: Disable CFI riscv: Add CFI error handling riscv: Add ftrace_stub_graph riscv: Add types to indirectly called assembly functions ... 
Pull RISC-V updates from Palmer Dabbelt:

 - Support for the new "riscv,isa-extensions" and "riscv,isa-base"
   device tree interfaces for probing extensions

 - Support for userspace access to the performance counters

 - Support for more instructions in kprobes

 - Crash kernels can be allocated above 4GiB

 - Support for KCFI

 - Support for ELFs in !MMU configurations

 - ARCH_KMALLOC_MINALIGN has been reduced to 8

 - mmap() defaults to sv48-sized addresses, with longer addresses hidden
   behind a hint (similar to Arm and Intel)

 - Also various fixes and cleanups

* tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
  lib/Kconfig.debug: Restrict DEBUG_INFO_SPLIT for RISC-V
  riscv: support PREEMPT_DYNAMIC with static keys
  riscv: Move create_tmp_mapping() to init sections
  riscv: Mark KASAN tmp* page tables variables as static
  riscv: mm: use bitmap_zero() API
  riscv: enable DEBUG_FORCE_FUNCTION_ALIGN_64B
  riscv: remove redundant mv instructions
  RISC-V: mm: Document mmap changes
  RISC-V: mm: Update pgtable comment documentation
  RISC-V: mm: Add tests for RISC-V mm
  RISC-V: mm: Restrict address space for sv39,sv48,sv57
  riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent
  riscv: allow kmalloc() caches aligned to the smallest value
  riscv: support the elf-fdpic binfmt loader
  binfmt_elf_fdpic: support 64-bit systems
  riscv: Allow CONFIG_CFI_CLANG to be selected
  riscv/purgatory: Disable CFI
  riscv: Add CFI error handling
  riscv: Add ftrace_stub_graph
  riscv: Add types to indirectly called assembly functions
  ...
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux 2023-08-29T00:34:54+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-08-29T00:34:54+00:00 542034175ca715d28522a59c1f88a58349f2765c Pull arm64 updates from Will Deacon: "I think we have a bit less than usual on the architecture side, but that's somewhat balanced out by a large crop of perf/PMU driver updates and extensions to our selftests. CPU features and system registers: - Advertise hinted conditional branch support (FEAT_HBC) to userspace - Avoid false positive "SANITY CHECK" warning when xCR registers differ outside of the length field Documentation: - Fix macro name typo in SME documentation Entry code: - Unmask exceptions earlier on the system call entry path Memory management: - Don't bother clearing PTE_RDONLY for dirty ptes in pte_wrprotect() and pte_modify() Perf and PMU drivers: - Initial support for Coresight TRBE devices on ACPI systems (the coresight driver changes will come later) - Fix hw_breakpoint single-stepping when called from bpf - Fixes for DDR PMU on i.MX8MP SoC - Add NUMA-awareness to Hisilicon PCIe PMU driver - Fix locking dependency issue in Arm DMC620 PMU driver - Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver - Add support for Arm CMN-700 r3 parts to the CMN PMU driver - Add support for recent Arm Cortex CPU PMUs - Update Hisilicon PMU maintainers Selftests: - Add a bunch of new features to the hwcap test (JSCVT, PMULL, AES, SHA1, etc) - Fix SSVE test to leave streaming-mode after grabbing the signal context - Add new test for SVE vector-length changes with SME enabled Miscellaneous: - Allow compiler to warn on suspicious looking system register expressions - Work around SDEI firmware bug by aborting any running handlers on a kernel crash - Fix some harmless warnings when building with W=1 - Remove some unused function declarations - Other minor fixes and cleanup" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (62 commits) drivers/perf: hisi: Update HiSilicon PMU maintainers arm_pmu: acpi: Add a representative platform device for TRBE arm_pmu: acpi: Refactor arm_spe_acpi_register_device() kselftest/arm64: Fix hwcaps selftest build hw_breakpoint: fix single-stepping when using bpf_overflow_handler arm64/sysreg: refactor deprecated strncpy kselftest/arm64: add jscvt feature to hwcap test kselftest/arm64: add pmull feature to hwcap test kselftest/arm64: add AES feature check to hwcap test kselftest/arm64: add SHA1 and related features to hwcap test arm64: sysreg: Generate C compiler warnings on {read,write}_sysreg_s arguments kselftest/arm64: build BTI tests in output directory perf/imx_ddr: don't enable counter0 if none of 4 counters are used perf/imx_ddr: speed up overflow frequency of cycle drivers/perf: hisi: Schedule perf session according to locality kselftest/arm64: fix a memleak in zt_regs_run() perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency perf/smmuv3: Add MODULE_ALIAS for module auto loading perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09 kselftest/arm64: Size sycall-abi buffers for the actual maximum VL ... 
Pull arm64 updates from Will Deacon:
 "I think we have a bit less than usual on the architecture side, but
  that's somewhat balanced out by a large crop of perf/PMU driver
  updates and extensions to our selftests.

  CPU features and system registers:

   - Advertise hinted conditional branch support (FEAT_HBC) to userspace

   - Avoid false positive "SANITY CHECK" warning when xCR registers
     differ outside of the length field

  Documentation:

   - Fix macro name typo in SME documentation

  Entry code:

   - Unmask exceptions earlier on the system call entry path

  Memory management:

   - Don't bother clearing PTE_RDONLY for dirty ptes in pte_wrprotect()
     and pte_modify()

  Perf and PMU drivers:

   - Initial support for Coresight TRBE devices on ACPI systems (the
     coresight driver changes will come later)

   - Fix hw_breakpoint single-stepping when called from bpf

   - Fixes for DDR PMU on i.MX8MP SoC

   - Add NUMA-awareness to Hisilicon PCIe PMU driver

   - Fix locking dependency issue in Arm DMC620 PMU driver

   - Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver

   - Add support for Arm CMN-700 r3 parts to the CMN PMU driver

   - Add support for recent Arm Cortex CPU PMUs

   - Update Hisilicon PMU maintainers

  Selftests:

   - Add a bunch of new features to the hwcap test (JSCVT, PMULL, AES,
     SHA1, etc)

   - Fix SSVE test to leave streaming-mode after grabbing the signal
     context

   - Add new test for SVE vector-length changes with SME enabled

  Miscellaneous:

   - Allow compiler to warn on suspicious looking system register
     expressions

   - Work around SDEI firmware bug by aborting any running handlers on a
     kernel crash

   - Fix some harmless warnings when building with W=1

   - Remove some unused function declarations

   - Other minor fixes and cleanup"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (62 commits)
  drivers/perf: hisi: Update HiSilicon PMU maintainers
  arm_pmu: acpi: Add a representative platform device for TRBE
  arm_pmu: acpi: Refactor arm_spe_acpi_register_device()
  kselftest/arm64: Fix hwcaps selftest build
  hw_breakpoint: fix single-stepping when using bpf_overflow_handler
  arm64/sysreg: refactor deprecated strncpy
  kselftest/arm64: add jscvt feature to hwcap test
  kselftest/arm64: add pmull feature to hwcap test
  kselftest/arm64: add AES feature check to hwcap test
  kselftest/arm64: add SHA1 and related features to hwcap test
  arm64: sysreg: Generate C compiler warnings on {read,write}_sysreg_s arguments
  kselftest/arm64: build BTI tests in output directory
  perf/imx_ddr: don't enable counter0 if none of 4 counters are used
  perf/imx_ddr: speed up overflow frequency of cycle
  drivers/perf: hisi: Schedule perf session according to locality
  kselftest/arm64: fix a memleak in zt_regs_run()
  perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency
  perf/smmuv3: Add MODULE_ALIAS for module auto loading
  perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09
  kselftest/arm64: Size sycall-abi buffers for the actual maximum VL
  ...
Merge tag 'perf-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2023-08-28T23:35:01+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-08-28T23:35:01+00:00 1a7c611546e552193180941ecf6b191e659db979 Pull perf event updates from Ingo Molnar: - AMD IBS improvements - Intel PMU driver updates - Extend core perf facilities & the ARM PMU driver to better handle ARM big.LITTLE events - Micro-optimize software events and the ring-buffer code - Misc cleanups & fixes * tag 'perf-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore: Remove unnecessary ?: operator around pcibios_err_to_errno() call perf/x86/intel: Add Crestmont PMU x86/cpu: Update Hybrids x86/cpu: Fix Crestmont uarch x86/cpu: Fix Gracemont uarch perf: Remove unused extern declaration arch_perf_get_page_size() perf: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability arm_pmu: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability perf/x86: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability perf/x86/ibs: Set mem_lvl_num, mem_remote and mem_hops for data_src perf/mem: Add PERF_MEM_LVLNUM_NA to PERF_MEM_NA perf/mem: Introduce PERF_MEM_LVLNUM_UNC perf/ring_buffer: Use local_try_cmpxchg in __perf_output_begin locking/arch: Avoid variable shadowing in local_try_cmpxchg() perf/core: Use local64_try_cmpxchg in perf_swevent_set_period perf/x86: Use local64_try_cmpxchg perf/amd: Prevent grouping of IBS events 
Pull perf event updates from Ingo Molnar:

 - AMD IBS improvements

 - Intel PMU driver updates

 - Extend core perf facilities & the ARM PMU driver to better handle ARM big.LITTLE events

 - Micro-optimize software events and the ring-buffer code

 - Misc cleanups & fixes

* tag 'perf-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/uncore: Remove unnecessary ?: operator around pcibios_err_to_errno() call
  perf/x86/intel: Add Crestmont PMU
  x86/cpu: Update Hybrids
  x86/cpu: Fix Crestmont uarch
  x86/cpu: Fix Gracemont uarch
  perf: Remove unused extern declaration arch_perf_get_page_size()
  perf: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
  arm_pmu: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
  perf/x86: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
  arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability
  perf/x86/ibs: Set mem_lvl_num, mem_remote and mem_hops for data_src
  perf/mem: Add PERF_MEM_LVLNUM_NA to PERF_MEM_NA
  perf/mem: Introduce PERF_MEM_LVLNUM_UNC
  perf/ring_buffer: Use local_try_cmpxchg in __perf_output_begin
  locking/arch: Avoid variable shadowing in local_try_cmpxchg()
  perf/core: Use local64_try_cmpxchg in perf_swevent_set_period
  perf/x86: Use local64_try_cmpxchg
  perf/amd: Prevent grouping of IBS events
KVM: arm64: pmu: Resync EL0 state on counter rotation 2023-08-22T12:35:51+00:00 Marc Zyngier maz@kernel.org 2023-08-20T09:01:08+00:00 b1f778a223a2a8ad6262e5233cfc3483bcf6e213 Huang Shijie reports that, when profiling a guest from the host with a number of events that exceeds the number of available counters, the reported counts are wildly inaccurate. Without the counter oversubscription, the reported counts are correct. Their investigation indicates that upon counter rotation (which takes place on the back of a timer interrupt), we fail to re-apply the guest EL0 enabling, leading to the counting of host events instead of guest events. In order to solve this, add yet another hook between the host PMU driver and KVM, re-applying the guest EL0 configuration if the right conditions apply (the host is VHE, we are in interrupt context, and we interrupted a running vcpu). This triggers a new vcpu request which will apply the correct configuration on guest reentry. With this, we have the correct counts, even when the counters are oversubscribed. Reported-by: Huang Shijie <shijie@os.amperecomputing.com> Suggested-by: Oliver Upton <oliver.upton@linux.dev> Tested_by: Huang Shijie <shijie@os.amperecomputing.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20230809013953.7692-1-shijie@os.amperecomputing.com Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20230820090108.177817-1-maz@kernel.org 
Huang Shijie reports that, when profiling a guest from the host
with a number of events that exceeds the number of available
counters, the reported counts are wildly inaccurate. Without
the counter oversubscription, the reported counts are correct.

Their investigation indicates that upon counter rotation (which
takes place on the back of a timer interrupt), we fail to
re-apply the guest EL0 enabling, leading to the counting of host
events instead of guest events.

In order to solve this, add yet another hook between the host PMU
driver and KVM, re-applying the guest EL0 configuration if the
right conditions apply (the host is VHE, we are in interrupt
context, and we interrupted a running vcpu). This triggers a new
vcpu request which will apply the correct configuration on guest
reentry.

With this, we have the correct counts, even when the counters are
oversubscribed.

Reported-by: Huang Shijie <shijie@os.amperecomputing.com>
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Tested_by: Huang Shijie <shijie@os.amperecomputing.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230809013953.7692-1-shijie@os.amperecomputing.com
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230820090108.177817-1-maz@kernel.org
arm_pmu: acpi: Add a representative platform device for TRBE 2023-08-18T17:07:10+00:00 Anshuman Khandual anshuman.khandual@arm.com 2023-08-17T05:54:03+00:00 1aa3d0274a4aac338ee45a3dfc3b17c944bcc2bc ACPI TRBE does not have a HID for identification which could create and add a platform device into the platform bus. Also without a platform device, it cannot be probed and bound to a platform driver. This creates a dummy platform device for TRBE after ascertaining that ACPI provides required interrupts uniformly across all cpus on the system. This device gets created inside drivers/perf/arm_pmu_acpi.c to accommodate TRBE being built as a module. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20230817055405.249630-3-anshuman.khandual@arm.com Signed-off-by: Will Deacon <will@kernel.org> 
ACPI TRBE does not have a HID for identification which could create and add
a platform device into the platform bus. Also without a platform device, it
cannot be probed and bound to a platform driver.

This creates a dummy platform device for TRBE after ascertaining that ACPI
provides required interrupts uniformly across all cpus on the system. This
device gets created inside drivers/perf/arm_pmu_acpi.c to accommodate TRBE
being built as a module.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20230817055405.249630-3-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
arm_pmu: acpi: Refactor arm_spe_acpi_register_device() 2023-08-18T17:07:09+00:00 Anshuman Khandual anshuman.khandual@arm.com 2023-08-17T05:54:02+00:00 81e5ee471609848ee1ebf3beb2a46788113fe0eb Sanity checking all the GICC tables for same interrupt number, and ensuring a homogeneous ACPI based machine, could be used for other platform devices as well. Hence this refactors arm_spe_acpi_register_device() into a common helper arm_acpi_register_pmu_device(). Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Co-developed-by: Will Deacon <will@kernel.org> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20230817055405.249630-2-anshuman.khandual@arm.com Signed-off-by: Will Deacon <will@kernel.org> 
Sanity checking all the GICC tables for same interrupt number, and ensuring
a homogeneous ACPI based machine, could be used for other platform devices
as well. Hence this refactors arm_spe_acpi_register_device() into a common
helper arm_acpi_register_pmu_device().

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Co-developed-by: Will Deacon <will@kernel.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20230817055405.249630-2-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
drivers: perf: Implement perf event mmap support in the SBI backend 2023-08-16T14:28:20+00:00 Alexandre Ghiti alexghiti@rivosinc.com 2023-08-02T08:03:25+00:00 cc4c07c89aada16229084eeb93895c95b7eabaa3 We used to unconditionnally expose the cycle and instret csrs to userspace, which gives rise to security concerns. So now we only allow access to hw counters from userspace through the perf framework which will handle context switches, per-task events...etc. A sysctl allows to revert the behaviour to the legacy mode so that userspace applications which are not ready for this change do not break. But the default value is to allow userspace only through perf: this will break userspace applications which rely on direct access to rdcycle. This choice was made for security reasons [1][2]: most of the applications which use rdcycle can instead use rdtime to count the elapsed time. [1] https://groups.google.com/a/groups.riscv.org/g/sw-dev/c/REWcwYnzsKE?pli=1 [2] https://www.youtube.com/watch?v=3-c4C_L2PRQ&ab_channel=IEEESymposiumonSecurityandPrivacy Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> 
We used to unconditionnally expose the cycle and instret csrs to
userspace, which gives rise to security concerns.

So now we only allow access to hw counters from userspace through the perf
framework which will handle context switches, per-task events...etc. A
sysctl allows to revert the behaviour to the legacy mode so that userspace
applications which are not ready for this change do not break.

But the default value is to allow userspace only through perf: this will
break userspace applications which rely on direct access to rdcycle.
This choice was made for security reasons [1][2]: most of the applications
which use rdcycle can instead use rdtime to count the elapsed time.

[1] https://groups.google.com/a/groups.riscv.org/g/sw-dev/c/REWcwYnzsKE?pli=1
[2] https://www.youtube.com/watch?v=3-c4C_L2PRQ&ab_channel=IEEESymposiumonSecurityandPrivacy

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>