Pull CXL (Compute Express Link) updates from Dan Williams:
 "The main new functionality this time is work to allow Linux to
  natively handle CXL link protocol errors signalled via PCIe AER for
  current generation CXL platforms. This required some enlightenment of
  the PCIe AER core to workaround the fact that current generation RCH
  (Restricted CXL Host) platforms physically hide topology details and
  registers via a mechanism called RCRB (Root Complex Register Block).

  The next major highlight is reworks to address bugs in parsing region
  configurations for next generation VH (Virtual Host) topologies. The
  old broken algorithm is replaced with a simpler one that significantly
  increases the number of region configurations supported by Linux. This
  is again relevant for error handling so that forward and reverse
  address translation of memory errors can be carried out by Linux for
  memory regions instantiated by platform firmware.

  As for other cross-tree work, the ACPI table parsing code has been
  refactored for reuse parsing the "CDAT" structure which is an
  ACPI-like data structure that is reported by CXL devices. That work is
  in preparation for v6.8 support for CXL QoS. Think of this as dynamic
  generation of NUMA node topology information generated by Linux rather
  than platform firmware.

  Lastly, a number of internal object lifetime issues have been resolved
  along with misc. fixes and feature updates (decoders_committed sysfs
  ABI).

  Summary:

   - Add support for RCH (Restricted CXL Host) Error recovery

   - Fix several region assembly bugs

   - Fix mem-device lifetime issues relative to the sanitize command and
     RCH topology.

   - Refactor ACPI table parsing for CDAT parsing re-use in preparation
     for CXL QOS support"

* tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (50 commits)
  lib/fw_table: Remove acpi_parse_entries_array() export
  cxl/pci: Change CXL AER support check to use native AER
  cxl/hdm: Remove broken error path
  cxl/hdm: Fix && vs || bug
  acpi: Move common tables helper functions to common lib
  cxl: Add support for reading CXL switch CDAT table
  cxl: Add checksum verification to CDAT from CXL
  cxl: Export QTG ids from CFMWS to sysfs as qos_class attribute
  cxl: Add decoders_committed sysfs attribute to cxl_port
  cxl: Add cxl_decoders_committed() helper
  cxl/core/regs: Rework cxl_map_pmu_regs() to use map->dev for devm
  cxl/core/regs: Rename phys_addr in cxl_map_component_regs()
  PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling
  PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler
  cxl/pci: Disable root port interrupts in RCH mode
  cxl/pci: Add RCH downstream port error logging
  cxl/pci: Map RCH downstream AER registers for logging protocol errors
  cxl/pci: Update CXL error logging to use RAS register address
  PCI/AER: Refactor cper_print_aer() for use by CXL driver module
  cxl/pci: Add RCH downstream port AER register discovery
  ...

Pull driver core updates from Greg KH:
 "Here is the set of driver core updates for 6.7-rc1. Nothing major in
  here at all, just a small number of changes including:

   - minor cleanups and updates from Andy Shevchenko

   - __counted_by addition

   - firmware_loader update for aborting loads cleaner

   - other minor changes, details in the shortlog

   - documentation update

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
  firmware_loader: Abort all upcoming firmware load request once reboot triggered
  firmware_loader: Refactor kill_pending_fw_fallback_reqs()
  Documentation: security-bugs.rst: linux-distros relaxed their rules
  driver core: Release all resources during unbind before updating device links
  driver core: class: remove boilerplate code
  driver core: platform: Annotate struct irq_affinity_devres with __counted_by
  resource: Constify resource crosscheck APIs
  resource: Unify next_resource() and next_resource_skip_children()
  resource: Reuse for_each_resource() macro
  PCI: Implement custom llseek for sysfs resource entries
  kernfs: sysfs: support custom llseek method for sysfs entries
  debugfs: Fix __rcu type comparison warning
  device property: Replace custom implementation of COUNT_ARGS()
  drivers: base: test: Make property entry API test modular
  driver core: Add missing parameter description to __fwnode_link_add()
  device property: Clarify usage scope of some struct fwnode_handle members
  devres: rename the first parameter of devm_add_action(_or_reset)
  driver core: platform: Unify the firmware node type check
  driver core: platform: Use temporary variable in platform_device_add()
  driver core: platform: Refactor error path in a couple places
  ...

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
     evaluation to learn device characteristics (Andy Shevchenko)

   - Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
     definition (Ilpo Järvinen)

   - Simplify config access error checking in various drivers (Ilpo
     Järvinen)

   - Use pcie_capability_clear_word() (not
     pcie_capability_clear_and_set_word()) when only clearing (Ilpo
     Järvinen)

   - Add pci_get_base_class() to simplify finding devices using base
     class only (ignoring subclass and programming interface) (Sui
     Jingfeng)

   - Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
     devices from before the Class Code was added to PCI (Sui Jingfeng)

   - Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
     include ancient VGA devices (Sui Jingfeng)

  Resource management:

   - Make pci_assign_unassigned_resources() non-init because sparc uses
     it after init (Randy Dunlap)

  Driver binding:

   - Retain .remove() and .probe() callbacks (previously __init) because
     sysfs may cause them to be called later (Uwe Kleine-König)

   - Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
     it can be claimed by dwc3 instead (Vicki Pfau)

  PCI device hotplug:

   - Add Ampere Altra Attention Indicator extension driver for acpiphp
     (D Scott Phillips)

  Power management:

   - Quirk VideoPropulsion Torrent QN16e with longer delay after reset
     (Lukas Wunner)

   - Prevent users from overriding drivers that say we shouldn't use
     D3cold (Lukas Wunner)

   - Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
     because wakeup interrupts from those states don't work if amd-pmc
     has put the platform in a hardware sleep state (Mario Limonciello)

  IOMMU:

   - Disable ATS for Intel IPU E2000 devices with invalidation message
     endianness erratum (Bartosz Pawlowski)

  Error handling:

   - Factor out interrupt enable/disable into helpers (Kai-Heng Feng)

  Peer-to-peer DMA:

   - Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
     ever use pagemaps with multiple entries (Gustavo A. R. Silva)

  ASPM:

   - Revert a change that broke when drivers disabled L1 and users later
     enabled an L1.x substate via sysfs, and fix a similar issue when
     users disabled L1 via sysfs (Heiner Kallweit)

  Endpoint framework:

   - Fix double free in __pci_epc_create() (Dan Carpenter)

   - Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)

  Cadence PCIe controller driver:

   - Drop unused "is_rc" member (Li Chen)

  Freescale Layerscape PCIe controller driver:

   - Enable 64-bit addressing in endpoint mode (Guanhua Gao)

  Intel VMD host bridge driver:

   - Fix multi-function header check (Ilpo Järvinen)

  Microsoft Hyper-V host bridge driver:

   - Annotate struct hv_dr_state with __counted_by (Kees Cook)

  NVIDIA Tegra194 PCIe controller driver:

   - Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
     already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
     Shimoda)

  Qualcomm PCIe controller driver:

   - Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
     (Manivannan Sadhasivam)

   - Add a .write_dbi2() callback so DBI2 register writes, e.g., for
     setting the BAR size, work correctly (Manivannan Sadhasivam)

   - Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
     doesn't enable ASPM states that haven't been enabled by the
     firmware (Manivannan Sadhasivam)

  Renesas R-Car Gen4 PCIe controller driver:

   - Add DesignWare core support (set max link width, EDMA_UNROLL flag,
     .pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
     (Yoshihiro Shimoda)

   - Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
     controller in both host and endpoint mode (Yoshihiro Shimoda)

  Xilinx NWL PCIe controller driver:

   - Update ECAM size to support 256 buses (Thippeswamy Havalige)

   - Stop setting bridge primary/secondary/subordinate bus numbers,
     since PCI core does this (Thippeswamy Havalige)

  Xilinx XDMA controller driver:

   - Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
     Xilinx XDMA Soft IP (Thippeswamy Havalige)

  Miscellaneous:

   - Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
     macros (Ilpo Järvinen, Bjorn Helgaas)

   - Remove logic_outb(), _outw(), outl() duplicate declarations (John
     Sanpe)

   - Replace unnecessary UTF-8 in Kconfig help text because menuconfig
     doesn't render it correctly (Liu Song)"

* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
  PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
  PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
  PCI: endpoint: Fix double free in __pci_epc_create()
  PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
  dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
  PCI: xilinx-cpm: Move IRQ definitions to a common header
  PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
  PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
  dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
  PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
  PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
  PCI/AER: Factor out interrupt toggling into helpers
  PCI: acpiphp: Allow built-in drivers for Attention Indicators
  PCI/portdrv: Use FIELD_GET()
  PCI/VC: Use FIELD_GET()
  PCI/PTM: Use FIELD_GET()
  PCI/PME: Use FIELD_GET()
  PCI/ATS: Use FIELD_GET()
  PCI/ATS: Show PASID Capability register width in bitmasks
  PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
  ...

Pull ia64 removal and asm-generic updates from Arnd Bergmann:

 - The ia64 architecture gets its well-earned retirement as planned,
   now that there is one last (mostly) working release that will be
   maintained as an LTS kernel.

 - The architecture specific system call tables are updated for the
   added map_shadow_stack() syscall and to remove references to the
   long-gone sys_lookup_dcookie() syscall.

* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  hexagon: Remove unusable symbols from the ptrace.h uapi
  asm-generic: Fix spelling of architecture
  arch: Reserve map_shadow_stack() syscall number for all architectures
  syscalls: Cleanup references to sys_lookup_dcookie()
  Documentation: Drop or replace remaining mentions of IA64
  lib/raid6: Drop IA64 support
  Documentation: Drop IA64 from feature descriptions
  kernel: Drop IA64 support from sig_fault handlers
  arch: Remove Itanium (IA-64) architecture

- Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device so dwc3 can
  claim it instead (Vicki Pfau)

- Make pci_assign_unassigned_resources() non-init because sparc uses it
  after init-time (Randy Dunlap)

- Remove logic_outb(), _outw(), outl() duplicate declarations (John Sanpe)

- Remove unnecessary UTF-8 in Kconfig help text that confuses menuconfig
  (Liu Song)

- Fix double free in __pci_epc_create() (Dan Carpenter)

- Simplify pcie_capability_clear_and_set_word() cases that could be
  pcie_capability_clear_word() (Ilpo Järvinen)

* pci/misc:
  PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
  PCI: endpoint: Fix double free in __pci_epc_create()
  PCI: Replace unnecessary UTF-8 in Kconfig
  logic_pio: Remove logic_outb(), _outw(), outl() duplicate declarations
  PCI: Make pci_assign_unassigned_resources() non-init
  PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device

- Use FIELD_GET()/FIELD_PREP() when possible throughout drivers/pci/ (Ilpo
  Järvinen, Bjorn Helgaas)

- Rework DPC control programming for clarity (Ilpo Järvinen)

* pci/field-get:
  PCI/portdrv: Use FIELD_GET()
  PCI/VC: Use FIELD_GET()
  PCI/PTM: Use FIELD_GET()
  PCI/PME: Use FIELD_GET()
  PCI/ATS: Use FIELD_GET()
  PCI/ATS: Show PASID Capability register width in bitmasks
  PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk
  PCI: Use FIELD_GET()
  PCI/MSI: Use FIELD_GET/PREP()
  PCI/DPC: Use defines with DPC reason fields
  PCI/DPC: Use defined fields with DPC_CTL register
  PCI/DPC: Use FIELD_GET()
  PCI: hotplug: Use FIELD_GET/PREP()
  PCI: dwc: Use FIELD_GET/PREP()
  PCI: cadence: Use FIELD_GET()
  PCI: Use FIELD_GET() to extract Link Width
  PCI: mvebu: Use FIELD_PREP() with Link Width
  PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields

# Conflicts:
#	drivers/pci/controller/dwc/pcie-tegra194.c

- Simplify config accessor error checking (Ilpo Järvinen)

* pci/config-errs:
  scsi: ipr: Do PCI error checks on own line
  PCI: xgene: Do PCI error check on own line & keep return value
  PCI: Do error check on own line to split long "if" conditions
  atm: iphase: Do PCI error checks on own line
  sh: pci: Do PCI error check on own line
  alpha: Streamline convoluted PCI error handling

- Move Xilinx IRQ definitions to a common header shared by pcie-xilinx-cpm
  and xilinx-xdma (Thippeswamy Havalige)

- Add Xilinx XDMA driver and DT schema (Thippeswamy Havalige)

* pci/controller/xilinx-xdma:
  PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
  dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
  PCI: xilinx-cpm: Move IRQ definitions to a common header

- Drop xilinx-nwl updates of bridge bus number fields, since PCI core
  already does that (Thippeswamy Havalige)

- Update xilinx-nwl driver and ECAM size in devicetree example to allow up
  to 256 buses (Thippeswamy Havalige)

* pci/controller/xilinx-ecam:
  PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
  PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
  dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
  PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields

- Fix space/tab whitespace issue (Xinghui Li)

* pci/controller/vmd:
  PCI: vmd: Fix inconsistent indentation in vmd_resume()