Pull dma_zalloc_coherent() removal from Christoph Hellwig:
 "We've always had a weird situation around dma_zalloc_coherent. To
  safely support mapping the allocations to userspace major
  architectures like x86 and arm have always zeroed allocations from
  dma_alloc_coherent, but a couple other architectures were missing that
  zeroing either always or in corner cases.

  Then later we grew anothe dma_zalloc_coherent interface to explicitly
  request zeroing, but that just added __GFP_ZERO to the allocation
  flags, which for some allocators that didn't end up using the page
  allocator ended up being a no-op and still not zeroing the
  allocations.

  So for this merge window I fixed up all remaining architectures to
  zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a
  no-op wrapper around dma_alloc_coherent, which fixes all of the above
  issues.

  dma_zalloc_coherent is now pointless and can go away, and Luis helped
  me writing a cocchinelle script and patch series to kill it, which I
  think we should apply now just after -rc1 to finally settle these
  issue"

* tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: remove dma_zalloc_coherent()
  cross-tree: phase out dma_zalloc_coherent() on headers
  cross-tree: phase out dma_zalloc_coherent()

Building the driver when GPIOLIB=n is not selected is causing the following
compilation failure:

  drivers/pci/controller/dwc/pci-meson.c: In function 'meson_pcie_assert_reset':
  drivers/pci/controller/dwc/pci-meson.c:290:2: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration]
    gpiod_set_value_cansleep(mp->reset_gpio, 0);
    ^~~~~~~~~~~~~~~~~~~~~~~~
    gpio_set_value_cansleep
  drivers/pci/controller/dwc/pci-meson.c: In function 'meson_pcie_probe':
  drivers/pci/controller/dwc/pci-meson.c:540:19: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration]
    mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
		     ^~~~~~~~~~~~~~
		     devm_gpio_free
  drivers/pci/controller/dwc/pci-meson.c:540:48: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'?
    mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
						  ^~~~~~~~~~~~~
						  GPIOF_INIT_LOW

Add the missing linux/gpio/consumer.h header to fix it.

Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.

This change was generated with the following Coccinelle SmPL patch:

@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@

-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>

Pull PCI updates from Bjorn Helgaas:

 - Remove unused lists from ASPM pcie_link_state (Frederick Lawler)

 - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian
   King)

 - Expand Kconfig "PF" acronyms (Randy Dunlap)

 - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas)

 - Add missing include to drivers/pci.h (Alexandru Gagniuc)

 - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it
   instead of xhci (Thinh Nguyen)

 - Clean up P2PDMA documentation (Randy Dunlap)

 - Allow runtime PM even if driver doesn't supply callbacks (Jarkko
   Nikula)

 - Remove status check after submitting Switchtec MRPC Firmware Download
   commands to avoid Completion Timeouts (Kelvin Cao)

 - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher)

 - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue
   (Joey Zhang)

 - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao)

 - Add Switchtec MRPC DMA mode support (Wesley Sheng)

 - Skip VF scanning on powerpc, which does this in firmware (Sebastian
   Ott)

 - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang)

 - Constify histb dw_pcie_host_ops structure (Julia Lawall)

 - Support multiple power domains for imx6 (Leonard Crestez)

 - Constify layerscape driver data (Stefan Agner)

 - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho)

 - Support armada8k GPIO reset (Baruch Siach)

 - Support suspend/resume support on imx6 (Leonard Crestez)

 - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren)

 - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov)

 - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi)

 - Mask DesignWare interrupts instead of disabling them to avoid lost
   interrupts (Marc Zyngier)

 - Add locking when acking DesignWare interrupts (Marc Zyngier)

 - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier)

 - Use devm resource parser in mediatek (Honghui Zhang)

 - Remove unused mediatek "num-lanes" DT property (Honghui Zhang)

 - Add UniPhier PCIe controller driver and DT bindings (Kunihiko
   Hayashi)

 - Enable MSI for imx6 downstream components (Richard Zhu)

* tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits)
  PCI: imx: Enable MSI from downstream components
  s390/pci: skip VF scanning
  PCI/IOV: Add flag so platforms can skip VF scanning
  PCI/IOV: Factor out sriov_add_vfs()
  PCI: uniphier: Add UniPhier PCIe host controller support
  dt-bindings: PCI: Add UniPhier PCIe host controller description
  PCI: amlogic: Add the Amlogic Meson PCIe controller driver
  dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
  arm64: dts: mt7622: Remove un-used property for PCIe
  arm: dts: mt7623: Remove un-used property for PCIe
  dt-bindings: PCI: MediaTek: Remove un-used property
  PCI: mediatek: Remove un-used variant in struct mtk_pcie_port
  MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry
  PCI: dwc: Don't hard-code DBI/ATU offset
  PCI: imx: Add imx6sx suspend/resume support
  PCI: armada8k: Add support for gpio controlled reset signal
  PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7
  PCI: dwc: layerscape: Constify driver data
  PCI: imx: Add multi-pd support
  PCI: Override Synopsys USB 3.x HAPS device class
  ...

Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.

It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access.  But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.

A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model.  And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.

This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.

There were a couple of notable cases:

 - csky still had the old "verify_area()" name as an alias.

 - the iter_iov code had magical hardcoded knowledge of the actual
   values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
   really used it)

 - microblaze used the type argument for a debug printout

but other than those oddities this should be a total no-op patch.

I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something.  Any missed conversion should be trivially fixable, though.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

  - Enable MSI for imx6 downstream components (Richard Zhu)

* pci/imx6:
  PCI: imx: Enable MSI from downstream components

  - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi)

* remotes/lorenzo/pci/uniphier:
  PCI: uniphier: Add UniPhier PCIe host controller support
  dt-bindings: PCI: Add UniPhier PCIe host controller description

# Conflicts:
#	drivers/pci/controller/dwc/Kconfig
#	drivers/pci/controller/dwc/Makefile

  - Use devm resource parser in mediatek (Honghui Zhang)

  - Remove unused mediatek "num-lanes" DT property (Honghui Zhang)

* remotes/lorenzo/pci/mediatek:
  arm64: dts: mt7622: Remove un-used property for PCIe
  arm: dts: mt7623: Remove un-used property for PCIe
  dt-bindings: PCI: MediaTek: Remove un-used property
  PCI: mediatek: Remove un-used variant in struct mtk_pcie_port
  PCI: mediatek: Use devm_of_pci_get_host_bridge_resources() to parse DT

  - Mask DesignWare interrupts instead of disabling them to avoid lost
    interrupts (Marc Zyngier)

  - Add locking when acking DesignWare interrupts (Marc Zyngier)

  - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier)

* remotes/lorenzo/pci/dwc-msi:
  PCI: dwc: Move interrupt acking into the proper callback
  PCI: dwc: Take lock when ACKing an interrupt
  PCI: dwc: Use interrupt masking instead of disabling

  - Constify histb dw_pcie_host_ops structure (Julia Lawall)

  - Support multiple power domains for imx6 (Leonard Crestez)

  - Constify layerscape driver data (Stefan Agner)

  - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho)

  - Support armada8k GPIO reset (Baruch Siach)

  - Support suspend/resume support on imx6 (Leonard Crestez)

  - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren)

  - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov)

  - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi)

* remotes/lorenzo/pci/dwc:
  MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry
  PCI: dwc: Don't hard-code DBI/ATU offset
  PCI: imx: Add imx6sx suspend/resume support
  PCI: armada8k: Add support for gpio controlled reset signal
  PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7
  PCI: dwc: layerscape: Constify driver data
  PCI: imx: Add multi-pd support
  dt-bindings: imx6q-pcie: Add multi-pd bindings for imx6sx
  PCI: histb: Constify dw_pcie_host_ops structure