linux.git/drivers/pci, branch v4.19-rc7 Linux kernel source tree Merge tag 'pci-v4.19-fixes-3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 2018-10-05T23:11:16+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2018-10-05T23:11:16+00:00 5943a9bbbb98b5c957662edd2fc902cc14e65895 Bjorn writes: "PCI fixes for v4.19: - Reprogram bridge prefetch registers to fix NVIDIA and Radeon issues after suspend/resume (Daniel Drake) - Fix mvebu I/O mapping creation sequence (Thomas Petazzoni) - Fix minor MAINTAINERS file match issue (Bjorn Helgaas)" * tag 'pci-v4.19-fixes-3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: mvebu: Fix PCI I/O mapping creation sequence MAINTAINERS: Remove obsolete drivers/pci pattern from ACPI section PCI: Reprogram bridge prefetch registers on resume 
Bjorn writes:
  "PCI fixes for v4.19:

   - Reprogram bridge prefetch registers to fix NVIDIA and Radeon issues
     after suspend/resume (Daniel Drake)

   - Fix mvebu I/O mapping creation sequence (Thomas Petazzoni)

   - Fix minor MAINTAINERS file match issue (Bjorn Helgaas)"

* tag 'pci-v4.19-fixes-3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: mvebu: Fix PCI I/O mapping creation sequence
  MAINTAINERS: Remove obsolete drivers/pci pattern from ACPI section
  PCI: Reprogram bridge prefetch registers on resume
PCI: mvebu: Fix PCI I/O mapping creation sequence 2018-10-01T20:42:09+00:00 Thomas Petazzoni thomas.petazzoni@bootlin.com 2018-10-01T12:49:34+00:00 95375f2ab2960c135484d83ea9f8f357cb1be26a Commit ee1604381a371 ("PCI: mvebu: Only remap I/O space if configured") had the side effect that the PCI I/O mapping was created much earlier than before, at a point where the probe() of the driver could still fail. This is for example a problem if one gets an -EPROBE_DEFER at some point during probe(), after pci_ioremap_io() has been called. Indeed, there is currently no function to undo what pci_ioremap_io() did, and switching to pci_remap_iospace() is not an option in pci-mvebu due to the need for special memory attributes on Armada 38x. Reverting ee1604381a371 ("PCI: mvebu: Only remap I/O space if configured") would be a possibility, but it would require also reverting 42342073e38b5 ("PCI: mvebu: Convert to use pci_host_bridge directly"). So instead, we use an open-coded version of pci_host_probe() that creates the PCI I/O mapping at a point where we are guaranteed not to fail anymore. Fixes: ee1604381a371 ("PCI: mvebu: Only remap I/O space if configured") Reported-by: Jan Kundrát <jan.kundrat@cesnet.cz> Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 
Commit ee1604381a371 ("PCI: mvebu: Only remap I/O space if configured") had
the side effect that the PCI I/O mapping was created much earlier than
before, at a point where the probe() of the driver could still fail. This
is for example a problem if one gets an -EPROBE_DEFER at some point during
probe(), after pci_ioremap_io() has been called.

Indeed, there is currently no function to undo what pci_ioremap_io() did,
and switching to pci_remap_iospace() is not an option in pci-mvebu due to
the need for special memory attributes on Armada 38x.

Reverting ee1604381a371 ("PCI: mvebu: Only remap I/O space if configured")
would be a possibility, but it would require also reverting 42342073e38b5
("PCI: mvebu: Convert to use pci_host_bridge directly"). So instead, we use
an open-coded version of pci_host_probe() that creates the PCI I/O mapping
at a point where we are guaranteed not to fail anymore.

Fixes: ee1604381a371 ("PCI: mvebu: Only remap I/O space if configured")
Reported-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 Merge tag 'pci-v4.19-fixes-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 2018-09-28T16:20:41+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2018-09-28T16:20:41+00:00 278e59a0074139e0437d5b5f641923fce64bcd4d Bjorn writes: "PCI fixes: - Fix ACPI hotplug issue that causes black screen crash at boot (Mika Westerberg) - Fix DesignWare "scheduling while atomic" issues (Jisheng Zhang) - Add PPC contacts to MAINTAINERS for PCI core error handling (Bjorn Helgaas) - Sort Mobiveil MAINTAINERS entry (Lorenzo Pieralisi)" * tag 'pci-v4.19-fixes-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge PCI: dwc: Fix scheduling while atomic issues MAINTAINERS: Move mobiveil PCI driver entry where it belongs MAINTAINERS: Update PPC contacts for PCI core error handling 
Bjorn writes:
  "PCI fixes:

  - Fix ACPI hotplug issue that causes black screen crash at boot (Mika
    Westerberg)

  - Fix DesignWare "scheduling while atomic" issues (Jisheng Zhang)

  - Add PPC contacts to MAINTAINERS for PCI core error handling (Bjorn
    Helgaas)

  - Sort Mobiveil MAINTAINERS entry (Lorenzo Pieralisi)"

* tag 'pci-v4.19-fixes-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge
  PCI: dwc: Fix scheduling while atomic issues
  MAINTAINERS: Move mobiveil PCI driver entry where it belongs
  MAINTAINERS: Update PPC contacts for PCI core error handling
PCI: Reprogram bridge prefetch registers on resume 2018-09-27T20:47:33+00:00 Daniel Drake drake@endlessm.com 2018-09-27T20:47:33+00:00 083874549fdfefa629dfa752785e20427dde1511 On 38+ Intel-based ASUS products, the NVIDIA GPU becomes unusable after S3 suspend/resume. The affected products include multiple generations of NVIDIA GPUs and Intel SoCs. After resume, nouveau logs many errors such as: fifo: fault 00 [READ] at 0000005555555000 engine 00 [GR] client 04 [HUB/FE] reason 4a [] on channel -1 [007fa91000 unknown] DRM: failed to idle channel 0 [DRM] Similarly, the NVIDIA proprietary driver also fails after resume (black screen, 100% CPU usage in Xorg process). We shipped a sample to NVIDIA for diagnosis, and their response indicated that it's a problem with the parent PCI bridge (on the Intel SoC), not the GPU. Runtime suspend/resume works fine, only S3 suspend is affected. We found a workaround: on resume, rewrite the Intel PCI bridge 'Prefetchable Base Upper 32 Bits' register (PCI_PREF_BASE_UPPER32). In the cases that I checked, this register has value 0 and we just have to rewrite that value. Linux already saves and restores PCI config space during suspend/resume, but this register was being skipped because upon resume, it already has value 0 (the correct, pre-suspend value). Intel appear to have previously acknowledged this behaviour and the requirement to rewrite this register: https://bugzilla.kernel.org/show_bug.cgi?id=116851#c23 Based on that, rewrite the prefetch register values even when that appears unnecessary. We have confirmed this solution on all the affected models we have in-hands (X542UQ, UX533FD, X530UN, V272UN). Additionally, this solves an issue where r8169 MSI-X interrupts were broken after S3 suspend/resume on ASUS X441UAR. This issue was recently worked around in commit 7bb05b85bc2d ("r8169: don't use MSI-X on RTL8106e"). It also fixes the same issue on RTL6186evl/8111evl on an Aimfor-tech laptop that we had not yet patched. I suspect it will also fix the issue that was worked around in commit 7c53a722459c ("r8169: don't use MSI-X on RTL8168g"). Thomas Martitz reports that this change also solves an issue where the AMD Radeon Polaris 10 GPU on the HP Zbook 14u G5 is unresponsive after S3 suspend/resume. Link: https://bugzilla.kernel.org/show_bug.cgi?id=201069 Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-By: Peter Wu <peter@lekensteyn.nl> CC: stable@vger.kernel.org 
On 38+ Intel-based ASUS products, the NVIDIA GPU becomes unusable after S3
suspend/resume.  The affected products include multiple generations of
NVIDIA GPUs and Intel SoCs.  After resume, nouveau logs many errors such
as:

  fifo: fault 00 [READ] at 0000005555555000 engine 00 [GR] client 04
        [HUB/FE] reason 4a [] on channel -1 [007fa91000 unknown]
  DRM: failed to idle channel 0 [DRM]

Similarly, the NVIDIA proprietary driver also fails after resume (black
screen, 100% CPU usage in Xorg process).  We shipped a sample to NVIDIA for
diagnosis, and their response indicated that it's a problem with the parent
PCI bridge (on the Intel SoC), not the GPU.

Runtime suspend/resume works fine, only S3 suspend is affected.

We found a workaround: on resume, rewrite the Intel PCI bridge
'Prefetchable Base Upper 32 Bits' register (PCI_PREF_BASE_UPPER32).  In the
cases that I checked, this register has value 0 and we just have to rewrite
that value.

Linux already saves and restores PCI config space during suspend/resume,
but this register was being skipped because upon resume, it already has
value 0 (the correct, pre-suspend value).

Intel appear to have previously acknowledged this behaviour and the
requirement to rewrite this register:
https://bugzilla.kernel.org/show_bug.cgi?id=116851#c23

Based on that, rewrite the prefetch register values even when that appears
unnecessary.

We have confirmed this solution on all the affected models we have in-hands
(X542UQ, UX533FD, X530UN, V272UN).

Additionally, this solves an issue where r8169 MSI-X interrupts were broken
after S3 suspend/resume on ASUS X441UAR.  This issue was recently worked
around in commit 7bb05b85bc2d ("r8169: don't use MSI-X on RTL8106e").  It
also fixes the same issue on RTL6186evl/8111evl on an Aimfor-tech laptop
that we had not yet patched.  I suspect it will also fix the issue that was
worked around in commit 7c53a722459c ("r8169: don't use MSI-X on
RTL8168g").

Thomas Martitz reports that this change also solves an issue where the AMD
Radeon Polaris 10 GPU on the HP Zbook 14u G5 is unresponsive after S3
suspend/resume.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=201069
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-By: Peter Wu <peter@lekensteyn.nl>
CC: stable@vger.kernel.org
 ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge 2018-09-26T20:39:28+00:00 Mika Westerberg mika.westerberg@linux.intel.com 2018-09-26T20:39:28+00:00 f188b99f0b2d33794b4af8a225f95d1e968c0a3f HP 6730b laptop has an ethernet NIC connected to one of the PCIe root ports. The root ports themselves are native PCIe hotplug capable. Now, during boot after PCI devices are scanned the BIOS triggers ACPI bus check directly to the NIC: ACPI: \_SB_.PCI0.RP06.NIC_: Bus check in hotplug_event() It is not clear why it is sending bus check but regardless the ACPI hotplug notify handler calls enable_slot() directly (instead of going through acpiphp_check_bridge() as there is no bridge), which ends up handling special case for non-hotplug bridges with native PCIe hotplug. This results a crash of some kind but the reporter only sees black screen so it is hard to figure out the exact spot and what actually happens. Based on a few fix proposals it was tracked to crash somewhere inside pci_assign_unassigned_bridge_resources(). In any case we should not really be in that special branch at all because the ACPI notify happened to a slot that is not a PCI bridge (it is just a regular PCI device). Fix this so that we only go to that special branch if we are calling enable_slot() for a bridge (e.g., the ACPI notification was for the bridge). Link: https://bugzilla.kernel.org/show_bug.cgi?id=201127 Fixes: 84c8b58ed3ad ("ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug") Reported-by: Peter Anemone <peter.anemone@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v4.18+ 
HP 6730b laptop has an ethernet NIC connected to one of the PCIe root
ports.  The root ports themselves are native PCIe hotplug capable.  Now,
during boot after PCI devices are scanned the BIOS triggers ACPI bus check
directly to the NIC:

  ACPI: \_SB_.PCI0.RP06.NIC_: Bus check in hotplug_event()

It is not clear why it is sending bus check but regardless the ACPI hotplug
notify handler calls enable_slot() directly (instead of going through
acpiphp_check_bridge() as there is no bridge), which ends up handling
special case for non-hotplug bridges with native PCIe hotplug.  This
results a crash of some kind but the reporter only sees black screen so it
is hard to figure out the exact spot and what actually happens.  Based on
a few fix proposals it was tracked to crash somewhere inside
pci_assign_unassigned_bridge_resources().

In any case we should not really be in that special branch at all because
the ACPI notify happened to a slot that is not a PCI bridge (it is just a
regular PCI device).

Fix this so that we only go to that special branch if we are calling
enable_slot() for a bridge (e.g., the ACPI notification was for the
bridge).

Link: https://bugzilla.kernel.org/show_bug.cgi?id=201127
Fixes: 84c8b58ed3ad ("ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug")
Reported-by: Peter Anemone <peter.anemone@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: stable@vger.kernel.org	# v4.18+
 PCI: hv: Fix return value check in hv_pci_assign_slots() 2018-09-22T02:13:22+00:00 Wei Yongjun weiyongjun1@huawei.com 2018-09-21T02:53:17+00:00 54be5b8ce33f8d1a05b258070c81ed98f935883d In case of error, the function pci_create_slot() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot information") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
In case of error, the function pci_create_slot() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().

Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot information")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PCI: dwc: Fix scheduling while atomic issues 2018-09-20T21:36:20+00:00 Jisheng Zhang Jisheng.Zhang@synaptics.com 2018-09-20T21:32:52+00:00 9024143e700f89d74b8cdaf316a3499d74fc56fe When programming the inbound/outbound ATUs, we call usleep_range() after each checking PCIE_ATU_ENABLE bit. Unfortunately, the ATU programming can be executed in atomic context: inbound ATU programming could be called through pci_epc_write_header() =>dw_pcie_ep_write_header() =>dw_pcie_prog_inbound_atu() outbound ATU programming could be called through pci_bus_read_config_dword() =>dw_pcie_rd_conf() =>dw_pcie_prog_outbound_atu() Fix this issue by calling mdelay() instead. Fixes: f8aed6ec624f ("PCI: dwc: designware: Add EP mode support") Fixes: d8bbeb39fbf3 ("PCI: designware: Wait for iATU enable") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> [lorenzo.pieralisi@arm.com: commit log update] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> 
When programming the inbound/outbound ATUs, we call usleep_range() after
each checking PCIE_ATU_ENABLE bit. Unfortunately, the ATU programming
can be executed in atomic context:

inbound ATU programming could be called through
pci_epc_write_header()
  =>dw_pcie_ep_write_header()
    =>dw_pcie_prog_inbound_atu()

outbound ATU programming could be called through
pci_bus_read_config_dword()
  =>dw_pcie_rd_conf()
    =>dw_pcie_prog_outbound_atu()

Fix this issue by calling mdelay() instead.

Fixes: f8aed6ec624f ("PCI: dwc: designware: Add EP mode support")
Fixes: d8bbeb39fbf3 ("PCI: designware: Wait for iATU enable")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
[lorenzo.pieralisi@arm.com: commit log update]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
 Merge gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net 2018-09-18T07:31:53+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2018-09-18T07:31:53+00:00 5211da9ca526a5adddee1ccd078e6e33a583ab36 Dave writes: "Various fixes, all over the place: 1) OOB data generation fix in bluetooth, from Matias Karhumaa. 2) BPF BTF boundary calculation fix, from Martin KaFai Lau. 3) Don't bug on excessive frags, to be compatible in situations mixing older and newer kernels on each end. From Juergen Gross. 4) Scheduling in RCU fix in hv_netvsc, from Stephen Hemminger. 5) Zero keying information in TLS layer before freeing copies of them, from Sabrina Dubroca. 6) Fix NULL deref in act_sample, from Davide Caratti. 7) Orphan SKB before GRO in veth to prevent crashes with XDP, from Toshiaki Makita. 8) Fix use after free in ip6_xmit, from Eric Dumazet. 9) Fix VF mac address regression in bnxt_en, from Micahel Chan. 10) Fix MSG_PEEK behavior in TLS layer, from Daniel Borkmann. 11) Programming adjustments to r8169 which fix not being to enter deep sleep states on some machines, from Kai-Heng Feng and Hans de Goede. 12) Fix DST_NOCOUNT flag handling for ipv6 routes, from Peter Oskolkov." * gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (45 commits) net/ipv6: do not copy dst flags on rt init qmi_wwan: set DTR for modems in forced USB2 mode clk: x86: Stop marking clocks as CLK_IS_CRITICAL r8169: Get and enable optional ether_clk clock clk: x86: add "ether_clk" alias for Bay Trail / Cherry Trail r8169: enable ASPM on RTL8106E r8169: Align ASPM/CLKREQ setting function with vendor driver Revert "kcm: remove any offset before parsing messages" kcm: remove any offset before parsing messages net: ethernet: Fix a unused function warning. net: dsa: mv88e6xxx: Fix ATU Miss Violation tls: fix currently broken MSG_PEEK behavior hv_netvsc: pair VF based on serial number PCI: hv: support reporting serial number as slot information bnxt_en: Fix VF mac address regression. ipv6: fix possible use-after-free in ip6_xmit() net: hp100: fix always-true check for link up state ARM: dts: at91: add new compatibility string for macb on sama5d3 net: macb: disable scatter-gather for macb on sama5d3 net: mvpp2: let phylink manage the carrier state ... 
Dave writes:
  "Various fixes, all over the place:

   1) OOB data generation fix in bluetooth, from Matias Karhumaa.

   2) BPF BTF boundary calculation fix, from Martin KaFai Lau.

   3) Don't bug on excessive frags, to be compatible in situations mixing
      older and newer kernels on each end.  From Juergen Gross.

   4) Scheduling in RCU fix in hv_netvsc, from Stephen Hemminger.

   5) Zero keying information in TLS layer before freeing copies
      of them, from Sabrina Dubroca.

   6) Fix NULL deref in act_sample, from Davide Caratti.

   7) Orphan SKB before GRO in veth to prevent crashes with XDP,
      from Toshiaki Makita.

   8) Fix use after free in ip6_xmit, from Eric Dumazet.

   9) Fix VF mac address regression in bnxt_en, from Micahel Chan.

   10) Fix MSG_PEEK behavior in TLS layer, from Daniel Borkmann.

   11) Programming adjustments to r8169 which fix not being to enter deep
       sleep states on some machines, from Kai-Heng Feng and Hans de
       Goede.

   12) Fix DST_NOCOUNT flag handling for ipv6 routes, from Peter
       Oskolkov."

* gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (45 commits)
  net/ipv6: do not copy dst flags on rt init
  qmi_wwan: set DTR for modems in forced USB2 mode
  clk: x86: Stop marking clocks as CLK_IS_CRITICAL
  r8169: Get and enable optional ether_clk clock
  clk: x86: add "ether_clk" alias for Bay Trail / Cherry Trail
  r8169: enable ASPM on RTL8106E
  r8169: Align ASPM/CLKREQ setting function with vendor driver
  Revert "kcm: remove any offset before parsing messages"
  kcm: remove any offset before parsing messages
  net: ethernet: Fix a unused function warning.
  net: dsa: mv88e6xxx: Fix ATU Miss Violation
  tls: fix currently broken MSG_PEEK behavior
  hv_netvsc: pair VF based on serial number
  PCI: hv: support reporting serial number as slot information
  bnxt_en: Fix VF mac address regression.
  ipv6: fix possible use-after-free in ip6_xmit()
  net: hp100: fix always-true check for link up state
  ARM: dts: at91: add new compatibility string for macb on sama5d3
  net: macb: disable scatter-gather for macb on sama5d3
  net: mvpp2: let phylink manage the carrier state
  ...
PCI: hv: support reporting serial number as slot information 2018-09-17T14:59:41+00:00 Stephen Hemminger stephen@networkplumber.org 2018-09-14T19:54:56+00:00 a15f2c08c70811f120d99288d81f70d7f3d104f1 The Hyper-V host API for PCI provides a unique "serial number" which can be used as basis for sysfs PCI slot table. This can be useful for cases where userspace wants to find the PCI device based on serial number. When an SR-IOV NIC is added, the host sends an attach message with serial number. The kernel doesn't use the serial number, but it is useful when doing the same thing in a userspace driver such as the DPDK. By having /sys/bus/pci/slots/N it provides a direct way to find the matching PCI device. There maybe some cases where serial number is not unique such as when using GPU's. But the PCI slot infrastructure will handle that. This has a side effect which may also be useful. The common udev network device naming policy uses the slot information (rather than PCI address). Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The Hyper-V host API for PCI provides a unique "serial number" which
can be used as basis for sysfs PCI slot table. This can be useful
for cases where userspace wants to find the PCI device based on
serial number.

When an SR-IOV NIC is added, the host sends an attach message
with serial number. The kernel doesn't use the serial number, but
it is useful when doing the same thing in a userspace driver such
as the DPDK. By having /sys/bus/pci/slots/N it provides a direct
way to find the matching PCI device.

There maybe some cases where serial number is not unique such
as when using GPU's. But the PCI slot infrastructure will handle
that.

This has a side effect which may also be useful. The common udev
network device naming policy uses the slot information (rather
than PCI address).

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PCI: Fix enabling of PASID on RC integrated endpoints 2018-09-12T02:46:49+00:00 Felix Kuehling Felix.Kuehling@amd.com 2018-09-10T19:27:42+00:00 9d27e39d309c93025ae6aa97236af15bef2a5f1f Set the eetlp_prefix_path on PCIE_EXP_TYPE_RC_END devices to allow PASID to be enabled on them. This fixes IOMMUv2 initialization on AMD Carrizo APUs. Link: https://bugzilla.kernel.org/show_bug.cgi?id=201079 Fixes: 7ce3f912ae ("PCI: Enable PASID only if entire path supports End-End TLP prefixes") Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 
Set the eetlp_prefix_path on PCIE_EXP_TYPE_RC_END devices to allow PASID
to be enabled on them.  This fixes IOMMUv2 initialization on AMD Carrizo
APUs.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=201079
Fixes: 7ce3f912ae ("PCI: Enable PASID only if entire path supports End-End TLP prefixes")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>