Pull power management fixes from Rafael Wysocki:
 "These fix a recently exposed issue in the PCI device wakeup code and
  one older problem related to PCI device wakeup that has been reported
  recently, modify one more piece of computations in intel_pstate to get
  rid of a rounding error, fix a possible race in the schedutil cpufreq
  governor, fix the device PM QoS sysfs interface to correctly handle
  invalid user input, fix return values of two probe routines in devfreq
  drivers and constify an attribute_group structure in devfreq.

  Specifics:

   - Avoid clearing the PCI PME Enable bit for devices as a result of
     config space restoration which confuses AML executed afterward and
     causes wakeup events to be lost on some systems (Rafael Wysocki).

   - Fix the native PCIe PME interrupts handling in the cases when the
     PME IRQ is set up as a system wakeup one so that runtime PM remote
     wakeup works as expected after system resume on systems where that
     happens (Rafael Wysocki).

   - Fix the device PM QoS sysfs interface to handle invalid user input
     correctly instead of using an unititialized variable value as the
     latency tolerance for the device at hand (Dan Carpenter).

   - Get rid of one more rounding error from intel_pstate computations
     (Srinivas Pandruvada).

   - Fix the schedutil cpufreq governor to prevent it from possibly
     accessing unititialized data structures from governor callbacks in
     some cases on systems when multiple CPUs share a single cpufreq
     policy object (Vikram Mulukutla).

   - Fix the return values of probe routines in two devfreq drivers
     (Gustavo Silva).

   - Constify an attribute_group structure in devfreq (Arvind Yadav)"

* tag 'pm-fixes-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PCI / PM: Fix native PME handling during system suspend/resume
  PCI / PM: Restore PME Enable after config space restoration
  cpufreq: schedutil: Fix sugov_start() versus sugov_update_shared() race
  PM / QoS: return -EINVAL for bogus strings
  cpufreq: intel_pstate: Fix ratio setting for min_perf_pct
  PM / devfreq: constify attribute_group structures.
  PM / devfreq: tegra: fix error return code in tegra_devfreq_probe()
  PM / devfreq: rk3399_dmc: fix error return code in rk3399_dmcfreq_probe()

* pm-pci:
  PCI / PM: Fix native PME handling during system suspend/resume
  PCI / PM: Restore PME Enable after config space restoration

Commit 76cde7e49590 (PCI / PM: Make PCIe PME interrupts wake up from
suspend-to-idle) went too far with preventing pcie_pme_work_fn() from
clearing the root port's PME Status and re-enabling the PME interrupt
which should be done for PMEs to work correctly after system resume.

The failing scenario is as follows:

 1. pcie_pme_suspend() finds that the PME IRQ should be designated
    for system wakeup, so it calls enable_irq_wake() and then sets
    data->suspend_level to PME_SUSPEND_WAKEUP.

 2. PME interrupt happens at this point.

 3. pcie_pme_irq() runs, disables the PME interrupt and queues up
    the execution of pcie_pme_work_fn().

 4. pcie_pme_work_fn() runs before pcie_pme_resume() and breaks out
    of the loop right away, because data->suspend_level is not
    PME_SUSPEND_NONE, and it doesn't re-enable the PME interrupt
    for the same reason.

 5. pcie_pme_resume() runs and simply calls disable_irq_wake()
    without re-enabling the PME interrupt (because data->suspend_level
    is not PME_SUSPEND_NONE), so the PME interrupt remains disabled
    and the PME Status remains set.

To fix this notice that there is no reason why pcie_pme_work_fn()
should behave in a special way during system resume if the PME
interrupt is not disabled by pcie_pme_suspend() and partially revert
commit 76cde7e49590 and restore the previous (and correct) behavior
of pcie_pme_work_fn().

Fixes: 76cde7e49590 (PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle)
Reported-and-tested-by: Naresh Solanki <naresh.solanki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>

Commit dc15e71eefc7 (PCI / PM: Restore PME Enable if skipping wakeup
setup) introduced a mechanism by which the PME Enable bit can be
restored by pci_enable_wake() if dev->wakeup_prepared is set in
case it has been overwritten by PCI config space restoration.

However, that commit overlooked the fact that on some systems (Dell
XPS13 9360 in particular) the AML handling wakeup events checks PME
Status and PME Enable and it won't trigger a Notify() for devices
where those bits are not set while it is running.

That happens during resume from suspend-to-idle when pci_restore_state()
invoked by pci_pm_default_resume_early() clears PME Enable before the
wakeup events are processed by AML, effectively causing those wakeup
events to be ignored.

Fix this issue by restoring the PME Enable configuration right after
pci_restore_state() has been called instead of doing that in
pci_enable_wake().

Fixes: dc15e71eefc7 (PCI / PM: Restore PME Enable if skipping wakeup setup)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>

pci_scan_root_bus_bridge() returns zero for success, or a negative errno.
A typo in ae13cb9b1926 ("PCI: rockchip: Convert PCI scan API to
pci_scan_root_bus_bridge()") treated zero as a failure.

Fix the typo.

Fixes: ae13cb9b1926 ("PCI: rockchip: Convert PCI scan API to pci_scan_root_bus_bridge()")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Pull PCI updates from Bjorn Helgaas:

  - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee
    Khee)

  - make host bridge IRQ mapping much more generic (Matthew Minter,
    Lorenzo Pieralisi)

  - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo
    Pieralisi)

  - mutex sriov_configure() (Jakub Kicinski)

  - mutex pci_error_handlers callbacks (Christoph Hellwig)

  - split ->reset_notify() into ->reset_prepare()/reset_done()
    (Christoph Hellwig)

  - support multiple PCIe portdrv interrupts for MSI as well as MSI-X
    (Gabriele Paoloni)

  - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele
    Paoloni)

  - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez)

  - test INTx masking during enumeration, not at run-time (Piotr Gregor)

  - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki)

  - restore the status of PCI devices across hibernation (Chen Yu)

  - keep parent resources that start at 0x0 (Ard Biesheuvel)

  - enable ECRC only if device supports it (Bjorn Helgaas)

  - restore PRI and PASID state after Function-Level Reset (CQ Tang)

  - skip DPC event if device is not present (Keith Busch)

  - check domain when matching SMBIOS info (Sujith Pandel)

  - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson)

  - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng)

  - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas)

  - add Switchtec "running" status flag (Logan Gunthorpe)

  - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav)

  - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar
    Gogada)

  - move VMD SRCU cleanup after bus, child device removal (Jon Derrick)

  - add Faraday clock handling (Linus Walleij)

  - configure Rockchip MPS and reorganize (Shawn Lin)

  - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla)

  - support Tegra MSI 64-bit addressing (Thierry Reding)

  - use Rockchip normal (not privileged) register bank (Shawn Lin)

  - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song)

  - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc
    Gonzalez)

  - add MediaTek PCIe host controller support (Ryder Lee)

  - add Qualcomm IPQ4019 support (John Crispin)

  - add HyperV vPCI protocol v1.2 support (Jork Loeser)

  - add i.MX6 regulator support (Quentin Schulz)

* tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits)
  PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support
  PCI: Add DT binding for Sigma Designs Tango PCIe controller
  PCI: rockchip: Use normal register bank for config accessors
  dt-bindings: PCI: Add documentation for MediaTek PCIe
  PCI: Remove __pci_dev_reset() and pci_dev_reset()
  PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done()
  PCI: xilinx: Make of_device_ids const
  PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts
  PCI: vmd: Move SRCU cleanup after bus, child device removal
  PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000
  PCI: versatile: Add local struct device pointers
  PCI: tegra: Do not allocate MSI target memory
  PCI: tegra: Support MSI 64-bit addressing
  PCI: rockchip: Use local struct device pointer consistently
  PCI: rockchip: Check for clk_prepare_enable() errors during resume
  MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer
  PCI: rockchip: Configure RC's MPS setting
  PCI: rockchip: Reconfigure configuration space header type
  PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses()
  PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu()
  ...

* pci/host-tango:
  PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support
  PCI: Add DT binding for Sigma Designs Tango PCIe controller

Conflicts:
	drivers/pci/host/Kconfig
	drivers/pci/host/Makefile

This driver is required to work around several hardware bugs in the PCIe
controller.

The SMP8759 does not support legacy interrupts or IO space.

Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
[bhelgaas: add CONFIG_BROKEN dependency, various cleanups]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Pull power management updates from Rafael Wysocki:
 "The big ticket items here are the rework of suspend-to-idle in order
  to add proper support for power button wakeup from it on recent Dell
  laptops and the rework of interfaces exporting the current CPU
  frequency on x86.

  In addition to that, support for a few new pieces of hardware is
  added, the PCI/ACPI device wakeup infrastructure is simplified
  significantly and the wakeup IRQ framework is fixed to unbreak the IRQ
  bus locking infrastructure.

  Also, there are some functional improvements for intel_pstate, tools
  updates and small fixes and cleanups all over.

  Specifics:

   - Rework suspend-to-idle to allow it to take wakeup events signaled
     by the EC into account on ACPI-based platforms in order to properly
     support power button wakeup from suspend-to-idle on recent Dell
     laptops (Rafael Wysocki).

     That includes the core suspend-to-idle code rework, support for the
     Low Power S0 _DSM interface, and support for the ACPI INT0002
     Virtual GPIO device from Hans de Goede (required for USB keyboard
     wakeup from suspend-to-idle to work on some machines).

   - Stop trying to export the current CPU frequency via /proc/cpuinfo
     on x86 as that is inaccurate and confusing (Len Brown).

   - Rework the way in which the current CPU frequency is exported by
     the kernel (over the cpufreq sysfs interface) on x86 systems with
     the APERF and MPERF registers by always using values read from
     these registers, when available, to compute the current frequency
     regardless of which cpufreq driver is in use (Len Brown).

   - Rework the PCI/ACPI device wakeup infrastructure to remove the
     questionable and artificial distinction between "devices that can
     wake up the system from sleep states" and "devices that can
     generate wakeup signals in the working state" from it, which allows
     the code to be simplified quite a bit (Rafael Wysocki).

   - Fix the wakeup IRQ framework by making it use SRCU instead of RCU
     which doesn't allow sleeping in the read-side critical sections,
     but which in turn is expected to be allowed by the IRQ bus locking
     infrastructure (Thomas Gleixner).

   - Modify some computations in the intel_pstate driver to avoid
     rounding errors resulting from them (Srinivas Pandruvada).

   - Reduce the overhead of the intel_pstate driver in the HWP
     (hardware-managed P-states) mode and when the "performance" P-state
     selection algorithm is in use by making it avoid registering
     scheduler callbacks in those cases (Len Brown).

   - Rework the energy_performance_preference sysfs knob in intel_pstate
     by changing the values that correspond to different symbolic hint
     names used by it (Len Brown).

   - Make it possible to use more than one cpuidle driver at the same
     time on ARM (Daniel Lezcano).

   - Make it possible to prevent the cpuidle menu governor from using
     the 0 state by disabling it via sysfs (Nicholas Piggin).

   - Add support for FFH (Fixed Functional Hardware) MWAIT in ACPI C1 on
     AMD systems (Yazen Ghannam).

   - Make the CPPC cpufreq driver take the lowest nonlinear performance
     information into account (Prashanth Prakash).

   - Add support for hi3660 to the cpufreq-dt driver, fix the imx6q
     driver and clean up the sfi, exynos5440 and intel_pstate drivers
     (Colin Ian King, Krzysztof Kozlowski, Octavian Purdila, Rafael
     Wysocki, Tao Wang).

   - Fix a few minor issues in the generic power domains (genpd)
     framework and clean it up somewhat (Krzysztof Kozlowski, Mikko
     Perttunen, Viresh Kumar).

   - Fix a couple of minor issues in the operating performance points
     (OPP) framework and clean it up somewhat (Viresh Kumar).

   - Fix a CONFIG dependency in the hibernation core and clean it up
     slightly (Balbir Singh, Arvind Yadav, BaoJun Luo).

   - Add rk3228 support to the rockchip-io adaptive voltage scaling
     (AVS) driver (David Wu).

   - Fix an incorrect bit shift operation in the RAPL power capping
     driver (Adam Lessnau).

   - Add support for the EPP field in the HWP (hardware managed
     P-states) control register, HWP.EPP, to the x86_energy_perf_policy
     tool and update msr-index.h with HWP.EPP values (Len Brown).

   - Fix some minor issues in the turbostat tool (Len Brown).

   - Add support for AMD family 0x17 CPUs to the cpupower tool and fix a
     minor issue in it (Sherry Hurwitz).

   - Assorted cleanups, mostly related to the constification of some
     data structures (Arvind Yadav, Joe Perches, Kees Cook, Krzysztof
     Kozlowski)"

* tag 'pm-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (69 commits)
  cpufreq: Update scaling_cur_freq documentation
  cpufreq: intel_pstate: Clean up after performance governor changes
  PM: hibernate: constify attribute_group structures.
  cpuidle: menu: allow state 0 to be disabled
  intel_idle: Use more common logging style
  PM / Domains: Fix missing default_power_down_ok comment
  PM / Domains: Fix unsafe iteration over modified list of domains
  PM / Domains: Fix unsafe iteration over modified list of domain providers
  PM / Domains: Fix unsafe iteration over modified list of device links
  PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd device
  PM / Domains: Call driver's noirq callbacks
  PM / core: Drop run_wake flag from struct dev_pm_info
  PCI / PM: Simplify device wakeup settings code
  PCI / PM: Drop pme_interrupt flag from struct pci_dev
  ACPI / PM: Consolidate device wakeup settings code
  ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags
  PM / QoS: constify *_attribute_group.
  PM / AVS: rockchip-io: add io selectors and supplies for rk3228
  powercap/RAPL: prevent overridding bits outside of the mask
  PM / sysfs: Constify attribute groups
  ...

* pci/host-xilinx:
  PCI: xilinx: Make of_device_ids const
  PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts