Interpret zero value of max-link-speed property as invalid,
as the device tree bindings documentation specifies.

Link: https://lore.kernel.org/r/20200430080625.26070-4-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Now that all the PCI host drivers are using pci_parse_request_of_pci_ranges(),
make devm_of_pci_get_host_bridge_resources() static.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

Extend devm_of_pci_get_host_bridge_resources() and
pci_parse_request_of_pci_ranges() helpers to also parse the inbound
addresses from DT 'dma-ranges' and populate a resource list with the
translated addresses. This will help ensure 'dma-ranges' is always
parsed in a consistent way.

Tested-by: Srinath Mannam <srinath.mannam@broadcom.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> # for AArdvark
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Will Deacon <will@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Toan Le <toan@os.amperecomputing.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Tom Joseph <tjoseph@cadence.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in>
Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: rfi@lists.rocketboards.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org

pci_parse_request_of_pci_ranges() is missing a module export, so add it.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

530210c7814e ("of/irq: Replace of_irq with of_phandle_args") changed the
of_irq_parse_pci() parameter type but didn't change the corresponding
documentation.  Update the function doc to match.

Link: https://lore.kernel.org/r/20190807132049.10304-1-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

For PCI devices that have an OF node, set the fwnode as well. This way
drivers that rely on fwnode don't need the special case described by
commit f94277af03ea ("of/platform: Initialise dev->fwnode appropriately").

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

  - Move IRQ register address computation inside macros (Kishon Vijay
    Abraham I)

  - Separate legacy IRQ and MSI configuration (Kishon Vijay Abraham I)

  - Use hwirq, not virq, to get MSI IRQ number offset (Kishon Vijay Abraham
    I)

  - Squash ks_pcie_handle_msi_irq() into ks_pcie_msi_irq_handler() (Kishon
    Vijay Abraham I)

  - Add dwc support for platforms with custom MSI controllers (Kishon Vijay
    Abraham I)

  - Add keystone-specific MSI controller (Kishon Vijay Abraham I)

  - Remove dwc host_ops previously used for keystone-specific MSI (Kishon
    Vijay Abraham I)

  - Skip dwc default MSI init if platform has custom MSI controller (Kishon
    Vijay Abraham I)

  - Implement .start_link() and .stop_link() for keystone endpoint support
    (Kishon Vijay Abraham I)

  - Add keystone "reg-names" DT binding (Kishon Vijay Abraham I)

  - Squash ks_pcie_dw_host_init() into ks_pcie_add_pcie_port() (Kishon
    Vijay Abraham I)

  - Get keystone register resources from DT by name, not index (Kishon
    Vijay Abraham I)

  - Get DT resources in .probe() to prepare for endpoint support (Kishon
    Vijay Abraham I)

  - Add "ti,syscon-pcie-mode" DT property for PCIe mode configuration
    (Kishon Vijay Abraham I)

  - Explicitly set keystone to host mode (Kishon Vijay Abraham I)

  - Document DT "atu" reg-names requirement for DesignWare core >= 4.80
    (Kishon Vijay Abraham I)

  - Enable dwc iATU unroll for endpoint mode as well as host mode (Kishon
    Vijay Abraham I)

  - Add dwc "version" to identify core >= 4.80 for ATU programming (Kishon
    Vijay Abraham I)

  - Don't build ARM32-specific keystone code on ARM64 (Kishon Vijay Abraham
    I)

  - Add DT binding for keystone PCIe RC in AM654 SoC (Kishon Vijay Abraham
    I)

  - Add keystone support for AM654 SoC PCIe RC (Kishon Vijay Abraham I)

  - Reset keystone PHYs before enabling them (Kishon Vijay Abraham I)

  - Make of_pci_get_max_link_speed() available to endpoint drivers as well
    as host drivers (Kishon Vijay Abraham I)

  - Add keystone support for DT "max-link-speed" property (Kishon Vijay
    Abraham I)

  - Add endpoint library support for BAR buffer alignment (Kishon Vijay
    Abraham I)

  - Make all dw_pcie_ep_ops structs const (Kishon Vijay Abraham I)

  - Fix fencepost error in dw_pcie_ep_find_capability() (Kishon Vijay
    Abraham I)

  - Add dwc hooks for dbi/dbi2 that share the same address space (Kishon
    Vijay Abraham I)

  - Add keystone support for TI AM654x in endpoint mode (Kishon Vijay
    Abraham I)

  - Configure designware endpoints to advertise smallest resizable BAR
    (1MB) (Kishon Vijay Abraham I)

  - Align designware endpoint ATU windows for raising MSIs (Kishon Vijay
    Abraham I)

  - Add endpoint test support for TI AM654x (Kishon Vijay Abraham I)

  - Fix endpoint test test_reg_bar issue (Kishon Vijay Abraham I)

* remotes/lorenzo/pci/keystone:
  misc: pci_endpoint_test: Fix test_reg_bar to be updated in pci_endpoint_test
  misc: pci_endpoint_test: Add support to test PCI EP in AM654x
  PCI: designware-ep: Use aligned ATU window for raising MSI interrupts
  PCI: designware-ep: Configure Resizable BAR cap to advertise the smallest size
  PCI: keystone: Add support for PCIe EP in AM654x Platforms
  dt-bindings: PCI: Add PCI EP DT binding documentation for AM654
  PCI: dwc: Add callbacks for accessing dbi2 address space
  PCI: dwc: Fix dw_pcie_ep_find_capability() to return correct capability offset
  PCI: dwc: Add const qualifier to struct dw_pcie_ep_ops
  PCI: endpoint: Add support to specify alignment for buffers allocated to BARs
  PCI: keystone: Add support to set the max link speed from DT
  PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint drivers
  PCI: keystone: Invoke phy_reset() API before enabling PHY
  PCI: keystone: Add support for PCIe RC in AM654x Platforms
  dt-bindings: PCI: Add PCI RC DT binding documentation for AM654
  PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64
  PCI: dwc: Fix ATU identification for designware version >= 4.80
  PCI: dwc: Enable iATU unroll for endpoint too
  dt-bindings: PCI: Document "atu" reg-names
  PCI: keystone: Explicitly set the PCIe mode
  dt-bindings: PCI: Add dt-binding to configure PCIe mode
  PCI: keystone: Move resources initialization to prepare for EP support
  PCI: keystone: Use platform_get_resource_byname() to get memory resources
  PCI: keystone: Perform host initialization in a single function
  dt-bindings: PCI: keystone: Add "reg-names" binding information
  PCI: keystone: Cleanup error_irq configuration
  PCI: keystone: Add start_link()/stop_link() dw_pcie_ops
  PCI: dwc: Remove default MSI initialization for platform specific MSI chips
  PCI: dwc: Remove Keystone specific dw_pcie_host_ops
  PCI: keystone: Use Keystone specific msi_irq_chip
  PCI: dwc: Add support to use non default msi_irq_chip
  PCI: keystone: Cleanup ks_pcie_msi_irq_handler()
  PCI: keystone: Use hwirq to get the MSI IRQ number offset
  PCI: keystone: Add separate functions for configuring MSI and legacy interrupt
  PCI: keystone: Cleanup interrupt related macros

# Conflicts:
#	drivers/pci/controller/dwc/pcie-designware.h

of_pci_get_max_link_speed() is built only if CONFIG_PCI is enabled.
Make of_pci_get_max_link_speed() to be also used by PCI Endpoint
controllers with just CONFIG_PCI_ENDPOINT enabled.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>

Set the "untrusted" attribute to any PCIe port that has an
"external-facing" device tree property.  Any device downstream of this port
will inherit the attribute and have only the strictest IOMMU protection.

Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Convert string compares of DT node names to use of_node_name_eq() helper
instead.  This removes direct access to the node name pointer.

Signed-off-by: Rob Herring <robh@kernel.org>
[bhelgaas: drop similar rpaphp_core.c change to avoid merge conflict]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>