linux.git/drivers/pci/host, branch v4.9 Linux kernel source tree PCI: designware-plat: Update author email 2016-11-16T22:16:40+00:00 Joao Pinto Joao.Pinto@synopsys.com 2016-11-15T16:10:47+00:00 9f46107b8ce4f9a4bd6be50e2967df506d1c1631 I returned to Synopsys and so I am sending this patch to update the email address of the pcie-designware-plat author. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 
I returned to Synopsys and so I am sending this patch to update the email
address of the pcie-designware-plat author.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
 PCI: rockchip: Add three new resets as required properties 2016-11-10T17:14:37+00:00 Shawn Lin shawn.lin@rock-chips.com 2016-11-10T17:14:37+00:00 31a3a7b5b26f75fbe82de10ca99f2b673f6c26b4 pm_rst, aclk_rst, pclk_rst was controlled by ROM code so the software wasn't needed to control it again in theory. But it didn't work properly, so we do need to do it again and add enough delay between the assert of pm_rst and the deassert of pm_rst. The Soc intergrated with this controller, rk3399, is still under MP test internally, so the backward compatibility won't be a big deal. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org> 
pm_rst, aclk_rst, pclk_rst was controlled by ROM code so the software
wasn't needed to control it again in theory.  But it didn't work properly,
so we do need to do it again and add enough delay between the assert of
pm_rst and the deassert of pm_rst.  The Soc intergrated with this
controller, rk3399, is still under MP test internally, so the backward
compatibility won't be a big deal.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <robh@kernel.org>
PCI: designware: Check for iATU unroll support after initializing host 2016-11-04T20:28:55+00:00 Niklas Cassel niklas.cassel@axis.com 2016-10-14T21:54:55+00:00 416379f9ebded501eda882e6af0a7aafc1866700 dw_pcie_iatu_unroll_enabled() reads a dbi_base register. Reading any dbi_base register before pp->ops->host_init has been called causes "imprecise external abort" on platforms like ARTPEC-6, where the PCIe module is disabled at boot and first enabled in pp->ops->host_init. Move dw_pcie_iatu_unroll_enabled() to dw_pcie_setup_rc(), since it is after pp->ops->host_init, but before pp->iatu_unroll_enabled is actually used. Fixes: a0601a470537 ("PCI: designware: Add iATU Unroll feature") Tested-by: James Le Cuirot <chewi@gentoo.org> Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Joao Pinto <jpinto@synopsys.com> Acked-by: Olof Johansson <olof@lixom.net> 
dw_pcie_iatu_unroll_enabled() reads a dbi_base register.  Reading any
dbi_base register before pp->ops->host_init has been called causes
"imprecise external abort" on platforms like ARTPEC-6, where the PCIe
module is disabled at boot and first enabled in pp->ops->host_init.  Move
dw_pcie_iatu_unroll_enabled() to dw_pcie_setup_rc(), since it is after
pp->ops->host_init, but before pp->iatu_unroll_enabled is actually used.

Fixes: a0601a470537 ("PCI: designware: Add iATU Unroll feature")
Tested-by: James Le Cuirot <chewi@gentoo.org>
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Acked-by: Olof Johansson <olof@lixom.net>
 PCI: qcom: Fix pp->dev usage before assignment 2016-10-26T19:46:39+00:00 Srinivas Kandagatla srinivas.kandagatla@linaro.org 2016-10-25T13:42:51+00:00 ad110449e285c75eb53357e87419a73c96ccb1b9 Initialize pp->dev in qcom_pcie_probe() before calling get_resources(), which uses it. [bhelgaas: changelog] Fixes: e6a087eeaf91 ("PCI: qcom: Remove redundant struct qcom_pcie.dev") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 
Initialize pp->dev in qcom_pcie_probe() before calling get_resources(),
which uses it.

[bhelgaas: changelog]
Fixes: e6a087eeaf91 ("PCI: qcom: Remove redundant struct qcom_pcie.dev")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
 PCI: designware-plat: Update author email address 2016-10-21T14:54:46+00:00 Joao Pinto Joao.Pinto@synopsys.com 2016-10-21T09:31:48+00:00 02a1b8f4167eac709d269341f7c3c340984c28a6 Although I am leaving Synopsys, I would like to keep working with the linux kernel community and help in what you might find useful. For that I am sending this patch to change my contact e-mail. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 
Although I am leaving Synopsys, I would like to keep working with the linux
kernel community and help in what you might find useful.  For that I am
sending this patch to change my contact e-mail.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
 PCI: layerscape: Fix drvdata usage before assignment 2016-10-17T12:58:18+00:00 Marc Zyngier marc.zyngier@arm.com 2016-10-17T10:39:32+00:00 15480f3ab7a8b5333e170d7168ce8a1012cc735e Commit fefe6733e516 ("PCI: layerscape: Move struct pcie_port setup to probe function") changed the init ordering of the pcie structure, but started to use the pcie->drvdata field before initializing it. Mayhem follows. Fix this by moving the drvdata assignment right before the first use. Tested on LS2085a. Fixes: efe6733e516 ("PCI: layerscape: Move struct pcie_port setup to probe function") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 
Commit fefe6733e516 ("PCI: layerscape: Move struct pcie_port setup
to probe function") changed the init ordering of the pcie structure,
but started to use the pcie->drvdata field before initializing it.
Mayhem follows.

Fix this by moving the drvdata assignment right before the first use.
Tested on LS2085a.

Fixes: efe6733e516 ("PCI: layerscape: Move struct pcie_port setup to probe function")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
 Merge tag 'pci-v4.9-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 2016-10-14T00:08:58+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-10-14T00:08:58+00:00 40bd3a5f341b4ef4c6a49fb68938247d3065d8ad PCI changes for the v4.9 merge window: "Here are some more changes I'd like to have in v4.9. There's one small Tegra bug fix in the PHY poweroff path, which is only used in failure paths. The rest is all strictly cleanup that should make host bridge drivers more readable, but shouldn't actually change any behavior. Summary: - use local struct device pointers in many host bridge drivers for clarity - remove unused platform data - use generic DesignWare accessors - misc cleanups: remove redundant structure entries and re-order structure members to put comon generic fields first etc" * tag 'pci-v4.9-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits) MAINTAINERS: Add maintainer for the PCIe Marvell Armada 8K driver MAINTAINERS: Add DT binding to the Aardvark PCIe driver maintainer PCI: rockchip: Indent "if" statement body PCI: hisi: Reorder struct hisi_pcie PCI: hisi: Pass device-specific struct to internal functions PCI: hisi: Include register block base in PCIE_SYS_STATE4 address PCI: dra7xx: Reorder struct dra7xx_pcie PCI: xilinx-nwl: Remove unused platform data PCI: xilinx-nwl: Add local struct device pointers PCI: xilinx: Removed unused xilinx_pcie_assign_msi() argument PCI: xilinx: Remove unused platform data PCI: xilinx: Add local struct device pointers PCI: xgene: Add register accessors PCI: xgene: Pass struct xgene_pcie_port to setup functions PCI: xgene: Remove unused platform data PCI: tegra: Remove unused platform data PCI: tegra: Add local struct device pointers PCI: tegra: Fix argument order in tegra_pcie_phy_disable() PCI: rockchip: Remove unused platform data PCI: rcar-gen2: Add local struct device pointers ... 
PCI changes for the v4.9 merge window:
 "Here are some more changes I'd like to have in v4.9.  There's one
  small Tegra bug fix in the PHY poweroff path, which is only used in
  failure paths.

  The rest is all strictly cleanup that should make host bridge drivers
  more readable, but shouldn't actually change any behavior.

  Summary:

   - use local struct device pointers in many host bridge drivers for
     clarity

   - remove unused platform data

   - use generic DesignWare accessors

   - misc cleanups: remove redundant structure entries and re-order
     structure members to put comon generic fields first etc"

* tag 'pci-v4.9-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits)
  MAINTAINERS: Add maintainer for the PCIe Marvell Armada 8K driver
  MAINTAINERS: Add DT binding to the Aardvark PCIe driver maintainer
  PCI: rockchip: Indent "if" statement body
  PCI: hisi: Reorder struct hisi_pcie
  PCI: hisi: Pass device-specific struct to internal functions
  PCI: hisi: Include register block base in PCIE_SYS_STATE4 address
  PCI: dra7xx: Reorder struct dra7xx_pcie
  PCI: xilinx-nwl: Remove unused platform data
  PCI: xilinx-nwl: Add local struct device pointers
  PCI: xilinx: Removed unused xilinx_pcie_assign_msi() argument
  PCI: xilinx: Remove unused platform data
  PCI: xilinx: Add local struct device pointers
  PCI: xgene: Add register accessors
  PCI: xgene: Pass struct xgene_pcie_port to setup functions
  PCI: xgene: Remove unused platform data
  PCI: tegra: Remove unused platform data
  PCI: tegra: Add local struct device pointers
  PCI: tegra: Fix argument order in tegra_pcie_phy_disable()
  PCI: rockchip: Remove unused platform data
  PCI: rcar-gen2: Add local struct device pointers
  ...
Merge branches 'pci/host-armada', 'pci/host-artpec', 'pci/host-dra7xx', 'pci/host-exynos', 'pci/host-hisi', 'pci/host-imx6', 'pci/host-keystone', 'pci/host-layerscape', 'pci/host-qcom' and 'pci/host-spear' into next 2016-10-12T16:15:06+00:00 Bjorn Helgaas bhelgaas@google.com 2016-10-12T16:15:06+00:00 217c6d21e9245e590971905fd4501fd53730c800 * pci/host-armada: MAINTAINERS: Add maintainer for the PCIe Marvell Armada 8K driver PCI: armada: Reorder struct armada8k_pcie PCI: armada: Pass device-specific struct to internal functions PCI: armada: Use generic DesignWare accessors PCI: armada: Remove redundant struct armada8k_pcie.base PCI: armada: Add local base pointer PCI: armada: Remove unused platform data * pci/host-artpec: PCI: artpec6: Add resource name comments PCI: artpec6: Pass device-specific struct to internal functions PCI: artpec6: Remove unnecessary artpec6_pcie_link_up() PCI: artpec6: Use generic DesignWare accessors PCI: artpec6: Add register accessors PCI: artpec6: Remove unused platform data PCI: artpec6: Add local struct device pointers * pci/host-dra7xx: PCI: dra7xx: Reorder struct dra7xx_pcie PCI: dra7xx: Move struct pcie_port setup to probe function PCI: dra7xx: Pass device-specific struct to internal functions PCI: dra7xx: Use generic DesignWare accessors PCI: dra7xx: Set drvdata at end of probe function PCI: dra7xx: Remove redundant struct device pointer from dra7xx_pcie PCI: dra7xx: Add local struct device pointers * pci/host-exynos: PCI: exynos: Reorder struct exynos_pcie PCI: exynos: Pass device-specific struct to internal functions PCI: exynos: Name private struct pointer "exynos_pcie" consistently PCI: exynos: Uninline register accessors PCI: exynos: Add local struct device pointers * pci/host-hisi: PCI: hisi: Reorder struct hisi_pcie PCI: hisi: Pass device-specific struct to internal functions PCI: hisi: Include register block base in PCIE_SYS_STATE4 address PCI: hisi: Use generic DesignWare accessors PCI: hisi: Remove redundant struct hisi_pcie.reg_base PCI: hisi: Name private struct pointer "hisi_pcie" consistently PCI: hisi: Remove unused platform data PCI: hisi: Add local struct device pointers * pci/host-imx6: PCI: imx6: Remove unused return values PCI: imx6: Reorder struct imx6_pcie PCI: imx6: Use generic DesignWare accessors PCI: imx6: Pass device-specific struct to internal functions PCI: imx6: Pass struct imx6_pcie to PHY accessors PCI: imx6: Removed unused struct imx6_pcie.mem_base PCI: imx6: Remove redundant of_node pointer PCI: imx6: Add local struct device pointers * pci/host-keystone: PCI: keystone: Reorder struct keystone_pcie PCI: keystone: Add app register accessors PCI: keystone: Pass keystone_pcie, not va_app_base, to DBI functions PCI: keystone: Pass keystone_pcie, not address, to IRQ functions PCI: keystone: Use generic DesignWare accessors PCI: keystone: Add local struct device pointers * pci/host-layerscape: PCI: layerscape: Reorder struct ls_pcie PCI: layerscape: Remove unused ls_add_pcie_port() platform_device arg PCI: layerscape: Move struct pcie_port setup to probe function PCI: layerscape: Pass device-specific struct to internal functions PCI: layerscape: Remove redundant struct ls_pcie.dbi PCI: layerscape: Remove unused platform data PCI: layerscape: Add local struct device pointers * pci/host-qcom: PCI: qcom: Reorder struct qcom_pcie PCI: qcom: Remove redundant struct qcom_pcie.dev PCI: qcom: Remove redundant struct qcom_pcie.dbi PCI: qcom: Remove unused platform data * pci/host-spear: PCI: spear: Clean up struct device usage PCI: spear: Reorder struct spear13xx_pcie PCI: spear: Pass device-specific struct to internal functions PCI: spear: Remove unused constants 
* pci/host-armada:
  MAINTAINERS: Add maintainer for the PCIe Marvell Armada 8K driver
  PCI: armada: Reorder struct armada8k_pcie
  PCI: armada: Pass device-specific struct to internal functions
  PCI: armada: Use generic DesignWare accessors
  PCI: armada: Remove redundant struct armada8k_pcie.base
  PCI: armada: Add local base pointer
  PCI: armada: Remove unused platform data

* pci/host-artpec:
  PCI: artpec6: Add resource name comments
  PCI: artpec6: Pass device-specific struct to internal functions
  PCI: artpec6: Remove unnecessary artpec6_pcie_link_up()
  PCI: artpec6: Use generic DesignWare accessors
  PCI: artpec6: Add register accessors
  PCI: artpec6: Remove unused platform data
  PCI: artpec6: Add local struct device pointers

* pci/host-dra7xx:
  PCI: dra7xx: Reorder struct dra7xx_pcie
  PCI: dra7xx: Move struct pcie_port setup to probe function
  PCI: dra7xx: Pass device-specific struct to internal functions
  PCI: dra7xx: Use generic DesignWare accessors
  PCI: dra7xx: Set drvdata at end of probe function
  PCI: dra7xx: Remove redundant struct device pointer from dra7xx_pcie
  PCI: dra7xx: Add local struct device pointers

* pci/host-exynos:
  PCI: exynos: Reorder struct exynos_pcie
  PCI: exynos: Pass device-specific struct to internal functions
  PCI: exynos: Name private struct pointer "exynos_pcie" consistently
  PCI: exynos: Uninline register accessors
  PCI: exynos: Add local struct device pointers

* pci/host-hisi:
  PCI: hisi: Reorder struct hisi_pcie
  PCI: hisi: Pass device-specific struct to internal functions
  PCI: hisi: Include register block base in PCIE_SYS_STATE4 address
  PCI: hisi: Use generic DesignWare accessors
  PCI: hisi: Remove redundant struct hisi_pcie.reg_base
  PCI: hisi: Name private struct pointer "hisi_pcie" consistently
  PCI: hisi: Remove unused platform data
  PCI: hisi: Add local struct device pointers

* pci/host-imx6:
  PCI: imx6: Remove unused return values
  PCI: imx6: Reorder struct imx6_pcie
  PCI: imx6: Use generic DesignWare accessors
  PCI: imx6: Pass device-specific struct to internal functions
  PCI: imx6: Pass struct imx6_pcie to PHY accessors
  PCI: imx6: Removed unused struct imx6_pcie.mem_base
  PCI: imx6: Remove redundant of_node pointer
  PCI: imx6: Add local struct device pointers

* pci/host-keystone:
  PCI: keystone: Reorder struct keystone_pcie
  PCI: keystone: Add app register accessors
  PCI: keystone: Pass keystone_pcie, not va_app_base, to DBI functions
  PCI: keystone: Pass keystone_pcie, not address, to IRQ functions
  PCI: keystone: Use generic DesignWare accessors
  PCI: keystone: Add local struct device pointers

* pci/host-layerscape:
  PCI: layerscape: Reorder struct ls_pcie
  PCI: layerscape: Remove unused ls_add_pcie_port() platform_device arg
  PCI: layerscape: Move struct pcie_port setup to probe function
  PCI: layerscape: Pass device-specific struct to internal functions
  PCI: layerscape: Remove redundant struct ls_pcie.dbi
  PCI: layerscape: Remove unused platform data
  PCI: layerscape: Add local struct device pointers

* pci/host-qcom:
  PCI: qcom: Reorder struct qcom_pcie
  PCI: qcom: Remove redundant struct qcom_pcie.dev
  PCI: qcom: Remove redundant struct qcom_pcie.dbi
  PCI: qcom: Remove unused platform data

* pci/host-spear:
  PCI: spear: Clean up struct device usage
  PCI: spear: Reorder struct spear13xx_pcie
  PCI: spear: Pass device-specific struct to internal functions
  PCI: spear: Remove unused constants
Merge branch 'pci/host-designware' into next 2016-10-12T16:14:58+00:00 Bjorn Helgaas bhelgaas@google.com 2016-10-12T16:14:58+00:00 22c7e1d4b48f61138a9e81270beaf73e98099adf * pci/host-designware: PCI: designware-plat: Remove unused platform data PCI: designware-plat: Add local struct device pointers PCI: designware-plat: Remove redundant dw_plat_pcie.mem_base PCI: designware: Swap order of dw_pcie_writel_unroll() reg/val arguments PCI: designware: Uninline register accessors PCI: designware: Export dw_pcie_readl_rc(), dw_pcie_writel_rc() PCI: designware: Swap order of dw_pcie_writel_rc() reg/val arguments PCI: designware: Simplify pcie_host_ops.readl_rc() and .writel_rc() interfaces PCI: designware: Simplify dw_pcie_readl_unroll(), dw_pcie_writel_unroll() PCI: designware: Rename dw_pcie_valid_config() to dw_pcie_valid_device() 
* pci/host-designware:
  PCI: designware-plat: Remove unused platform data
  PCI: designware-plat: Add local struct device pointers
  PCI: designware-plat: Remove redundant dw_plat_pcie.mem_base
  PCI: designware: Swap order of dw_pcie_writel_unroll() reg/val arguments
  PCI: designware: Uninline register accessors
  PCI: designware: Export dw_pcie_readl_rc(), dw_pcie_writel_rc()
  PCI: designware: Swap order of dw_pcie_writel_rc() reg/val arguments
  PCI: designware: Simplify pcie_host_ops.readl_rc() and .writel_rc() interfaces
  PCI: designware: Simplify dw_pcie_readl_unroll(), dw_pcie_writel_unroll()
  PCI: designware: Rename dw_pcie_valid_config() to dw_pcie_valid_device()
Merge branches 'pci/host-aardvark', 'pci/host-altera', 'pci/host-iproc', 'pci/host-mvebu', 'pci/host-rcar', 'pci/host-rockchip', 'pci/host-tegra', 'pci/host-xgene' and 'pci/host-xilinx' into next 2016-10-12T16:14:44+00:00 Bjorn Helgaas bhelgaas@google.com 2016-10-12T16:14:44+00:00 dd5bba52d3efe13ea43ca95d72f2ed2cd3f1e612 * pci/host-aardvark: MAINTAINERS: Add DT binding to the Aardvark PCIe driver maintainer PCI: aardvark: Remove unused platform data PCI: aardvark: Add local struct device pointers * pci/host-altera: PCI: altera: Simplify TLP_CFG_DW1 usage PCI: altera: Simplify TLB_CFG_DW0 usage PCI: altera: Rename altera_pcie_valid_config() to altera_pcie_valid_device() PCI: altera: Remove redundant platform_get_resource() return value check PCI: altera: Remove unused platform data PCI: altera: Add local struct device pointers * pci/host-iproc: PCI: iproc: Hard-code PCIe capability offset instead of searching PCI: iproc: Remove redundant null pointer checking PCI: iproc: Validate CSR base in BCMA setup code PCI: iproc: Set drvdata at end of probe function PCI: iproc: Add local struct device pointers * pci/host-mvebu: PCI: mvebu: Use existing of_node pointer PCI: mvebu: Add local struct device pointers * pci/host-rcar: PCI: rcar-gen2: Add local struct device pointers PCI: rcar: Remove DRV_NAME macro PCI: rcar: Remove unused rcar_pcie_get_resources() platform_device arg PCI: rcar: Remove unused platform data PCI: rcar: Add local struct device pointers * pci/host-rockchip: PCI: rockchip: Indent "if" statement body PCI: rockchip: Remove unused platform data * pci/host-tegra: PCI: tegra: Remove unused platform data PCI: tegra: Add local struct device pointers PCI: tegra: Fix argument order in tegra_pcie_phy_disable() * pci/host-xgene: PCI: xgene: Add register accessors PCI: xgene: Pass struct xgene_pcie_port to setup functions PCI: xgene: Remove unused platform data PCI: xgene: Add local struct device pointers * pci/host-xilinx: PCI: xilinx-nwl: Remove unused platform data PCI: xilinx-nwl: Add local struct device pointers PCI: xilinx: Removed unused xilinx_pcie_assign_msi() argument PCI: xilinx: Remove unused platform data PCI: xilinx: Add local struct device pointers 
* pci/host-aardvark:
  MAINTAINERS: Add DT binding to the Aardvark PCIe driver maintainer
  PCI: aardvark: Remove unused platform data
  PCI: aardvark: Add local struct device pointers

* pci/host-altera:
  PCI: altera: Simplify TLP_CFG_DW1 usage
  PCI: altera: Simplify TLB_CFG_DW0 usage
  PCI: altera: Rename altera_pcie_valid_config() to altera_pcie_valid_device()
  PCI: altera: Remove redundant platform_get_resource() return value check
  PCI: altera: Remove unused platform data
  PCI: altera: Add local struct device pointers

* pci/host-iproc:
  PCI: iproc: Hard-code PCIe capability offset instead of searching
  PCI: iproc: Remove redundant null pointer checking
  PCI: iproc: Validate CSR base in BCMA setup code
  PCI: iproc: Set drvdata at end of probe function
  PCI: iproc: Add local struct device pointers

* pci/host-mvebu:
  PCI: mvebu: Use existing of_node pointer
  PCI: mvebu: Add local struct device pointers

* pci/host-rcar:
  PCI: rcar-gen2: Add local struct device pointers
  PCI: rcar: Remove DRV_NAME macro
  PCI: rcar: Remove unused rcar_pcie_get_resources() platform_device arg
  PCI: rcar: Remove unused platform data
  PCI: rcar: Add local struct device pointers

* pci/host-rockchip:
  PCI: rockchip: Indent "if" statement body
  PCI: rockchip: Remove unused platform data

* pci/host-tegra:
  PCI: tegra: Remove unused platform data
  PCI: tegra: Add local struct device pointers
  PCI: tegra: Fix argument order in tegra_pcie_phy_disable()

* pci/host-xgene:
  PCI: xgene: Add register accessors
  PCI: xgene: Pass struct xgene_pcie_port to setup functions
  PCI: xgene: Remove unused platform data
  PCI: xgene: Add local struct device pointers

* pci/host-xilinx:
  PCI: xilinx-nwl: Remove unused platform data
  PCI: xilinx-nwl: Add local struct device pointers
  PCI: xilinx: Removed unused xilinx_pcie_assign_msi() argument
  PCI: xilinx: Remove unused platform data
  PCI: xilinx: Add local struct device pointers