linux.git/drivers/pci/endpoint, branch v6.7

Merge branch 'pci/misc'

2023-10-28T18:31:05+00:00

- Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device so dwc3 can
  claim it instead (Vicki Pfau)

- Make pci_assign_unassigned_resources() non-init because sparc uses it
  after init-time (Randy Dunlap)

- Remove logic_outb(), _outw(), outl() duplicate declarations (John Sanpe)

- Remove unnecessary UTF-8 in Kconfig help text that confuses menuconfig
  (Liu Song)

- Fix double free in __pci_epc_create() (Dan Carpenter)

- Simplify pcie_capability_clear_and_set_word() cases that could be
  pcie_capability_clear_word() (Ilpo Järvinen)

* pci/misc:
  PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
  PCI: endpoint: Fix double free in __pci_epc_create()
  PCI: Replace unnecessary UTF-8 in Kconfig
  logic_pio: Remove logic_outb(), _outw(), outl() duplicate declarations
  PCI: Make pci_assign_unassigned_resources() non-init
  PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device

PCI: endpoint: Fix double free in __pci_epc_create()

2023-10-26T16:12:16+00:00

The pci_epc_release() function frees "epc" so the kfree() on the next line
is a double free.  Drop the redundant free.

Fixes: 7711cbb4862a ("PCI: endpoint: Fix WARN() when an endpoint driver is removed")
Link: https://lore.kernel.org/r/2ce68694-87a7-4c06-b8a4-9870c891b580@moroto.mountain
Signed-off-by: Dan Carpenter 
Signed-off-by: Bjorn Helgaas 
Reviewed-by: Manivannan Sadhasivam

PCI: endpoint: Use IS_ERR_OR_NULL() helper function

2023-10-05T22:14:56+00:00

Use the IS_ERR_OR_NULL() helper instead of open-coding a NULL and an
error pointer checks to simplify the code and improve readability.

No functional changes are intended.

[kwilczynski: commit log]
Signed-off-by: Ruan Jinjie 
Signed-off-by: Krzysztof Wilczyński 
Signed-off-by: Bjorn Helgaas 
Reviewed-by: Manivannan Sadhasivam

Merge branch 'pci/misc'

2023-08-29T16:03:57+00:00

- Reorder struct pci_dev to avoid holes and reduce size (Christophe
  JAILLET)

- Change pdev->rom_attr_enabled to single bit since it's only a boolean
  value (Christophe JAILLET)

- Use struct_size() in pirq_convert_irt_table() instead of hand-writing it
  (Christophe JAILLET)

- Explicitly include correct DT includes to untangle headers (Rob Herring)

- Fix a DOE race between destroy_work_on_stack() and the stack-allocated
  task->work struct going out of scope in pci_doe() (Ira Weiny)

- Use pci_dev_id() when possible instead of manually composing ID from
  dev->bus->number and dev->devfn (Xiongfeng Wang, Zheng Zengkai)

- Move pci_create_resource_files() declarations to linux/pci.h for alpha
  build warnings (Arnd Bergmann)

- Remove unused hotplug function declarations (Yue Haibing)

- Remove unused mvebu struct mvebu_pcie.busn (Pali Rohár)

- Unexport pcie_port_bus_type (Bjorn Helgaas)

- Remove unnecessary sysfs ID local variable initialization (Bjorn Helgaas)

- Fix BAR value printk formatting to accommodate 32-bit values (Bjorn
  Helgaas)

- Use consistent pointer types for config access syscall get_user() and
  put_user() uses (Bjorn Helgaas)

- Simplify AER_RECOVER_RING_SIZE definition (Bjorn Helgaas)

- Simplify pci_pio_to_address() (Bjorn Helgaas)

- Simplify pci_dev_driver() (Bjorn Helgaas)

- Fix pci_bus_resetable(), pci_slot_resetable() name typos (Bjorn Helgaas)

- Fix code and doc typos and code formatting (Bjorn Helgaas)

- Tidy config space save/restore messages (Bjorn Helgaas)

* pci/misc:
  PCI: Tidy config space save/restore messages
  PCI: Fix code formatting inconsistencies
  PCI: Fix typos in docs and comments
  PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos
  PCI: Simplify pci_dev_driver()
  PCI: Simplify pci_pio_to_address()
  PCI/AER: Simplify AER_RECOVER_RING_SIZE definition
  PCI: Use consistent put_user() pointer types
  PCI: Fix printk field formatting
  PCI: Remove unnecessary initializations
  PCI: Unexport pcie_port_bus_type
  PCI: mvebu: Remove unused busn member
  PCI: Remove unused function declarations
  PCI/sysfs: Move declarations to linux/pci.h
  PCI/P2PDMA: Use pci_dev_id() to simplify the code
  PCI/IOV: Use pci_dev_id() to simplify the code
  PCI/AER: Use pci_dev_id() to simplify the code
  PCI: apple: Use pci_dev_id() to simplify the code
  PCI/DOE: Fix destroy_work_on_stack() race
  PCI: Explicitly include correct DT includes
  x86/PCI: Use struct_size() in pirq_convert_irt_table()
  PCI: Change pdev->rom_attr_enabled to single bit
  PCI: Reorder pci_dev fields to reduce holes

PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API

2023-08-26T16:54:46+00:00

Add missing kernel-doc for pci_epc_mem_init() API.

Link: https://lore.kernel.org/linux-pci/20230717065459.14138-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam 
Signed-off-by: Krzysztof Wilczyński 
Reviewed-by: Randy Dunlap

PCI: epf-mhi: Use iATU for small transfers

2023-08-26T16:54:46+00:00

For transfers below 4K, let's use iATU since using eDMA for such small
transfers is inefficient.

This is mainly because setting up an eDMA transfer and waiting for
completion adds some latency. This latency is negligible for large
transfers but not for the smaller ones.

With using iATU, there is an increase in ~50Mbps throughput on both MHI
UL (Uplink) and DL (Downlink) channels.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam 
Signed-off-by: Krzysztof Wilczyński

PCI: epf-mhi: Add support for SM8450

2023-08-26T16:54:46+00:00

Add support for Qualcomm Snapdragon SM8450 SoC to the EPF driver. SM8450
has the dedicated PID (0x0306) and supports eDMA. Currently, it has no
fixed PCI class, so it is being advertised as "PCI_CLASS_OTHERS".

Link: https://lore.kernel.org/linux-pci/20230717065459.14138-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam 
Signed-off-by: Krzysztof Wilczyński

PCI: epf-mhi: Add eDMA support

2023-08-26T16:54:45+00:00

Add support for Embedded DMA (eDMA) available in the DesignWare PCIe IP
to transfer the MHI buffers between the host and the endpoint. The eDMA
use helps achieve greater throughput as the transfers are offloaded from
CPUs.

For differentiating the iATU and eDMA APIs, the pci_epf_mhi_{read/write}
APIs are renamed to pci_epf_mhi_iatu_{read/write} and separate eDMA
specific APIs pci_epf_mhi_edma_{read/write} are introduced.

Platforms that require eDMA support can pass the MHI_EPF_USE_DMA flag
through pci_epf_mhi_ep_info.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam 
Signed-off-by: Krzysztof Wilczyński

PCI: epf-mhi: Make use of the alignment restriction from EPF core

2023-08-26T16:54:45+00:00

Instead of hardcoding the alignment restriction in the EPF_MHI driver, make
use of the info available from the EPF core that reflects the alignment
restriction of the endpoint controller.

For this purpose, let's introduce the get_align_offset() static function.

[kwilczynski: update get_align_offset() to avoid issues on 32-bit architectures]
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-3-manivannan.sadhasivam@linaro.org
Link: https://lore.kernel.org/linux-pci/20230826150626.23309-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam 
Signed-off-by: Krzysztof Wilczyński

PCI: Fix typos in docs and comments

2023-08-25T13:15:38+00:00

Fix typos in docs and comments.

Link: https://lore.kernel.org/r/20230824193712.542167-11-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas 
Reviewed-by: Randy Dunlap 
Reviewed-by: Ilpo Järvinen