linux.git/drivers/pci/controller/dwc/Makefile, branch for-next Linux kernel source tree PCI: qcom: Add equalization settings for 16.0 GT/s 2024-09-13T14:44:57+00:00 Shashank Babu Chinta Venkata quic_schintav@quicinc.com 2024-09-11T15:26:28+00:00 d45736b5984954da71292d858f277bac9c70cd2e During high data transmission rates such as 16.0 GT/s, there is an increased risk of signal loss due to poor channel quality and interference. This can impact receiver's ability to capture signals accurately. Hence, as signal compensation is achieved through appropriate lane equalization, apply lane equalization settings at both transmitter and receiver which results in an increase in the PCIe signal strength. While at it, modify the pcie-tegra194 driver to make use of the common GEN3_EQ_CONTROL_OFF definitions in pcie-designware.h. Link: https://lore.kernel.org/linux-pci/20240911-pci-qcom-gen4-stability-v7-3-743f5c1fd027@linaro.org Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Shashank Babu Chinta Venkata <quic_schintav@quicinc.com> [mani: dropped the code refactoring and minor changes] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> 
During high data transmission rates such as 16.0 GT/s, there is an
increased risk of signal loss due to poor channel quality and
interference. This can impact receiver's ability to capture signals
accurately.

Hence, as signal compensation is achieved through appropriate lane
equalization, apply lane equalization settings at both transmitter
and receiver which results in an increase in the PCIe signal strength.

While at it, modify the pcie-tegra194 driver to make use of the
common GEN3_EQ_CONTROL_OFF definitions in pcie-designware.h.

Link: https://lore.kernel.org/linux-pci/20240911-pci-qcom-gen4-stability-v7-3-743f5c1fd027@linaro.org
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Shashank Babu Chinta Venkata <quic_schintav@quicinc.com>
[mani: dropped the code refactoring and minor changes]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
PCI: dw-rockchip: Add endpoint mode support 2024-07-09T23:29:36+00:00 Niklas Cassel cassel@kernel.org 2024-06-07T11:14:30+00:00 e242f26f6320e30e77e0455473a9d7f037ddb8a0 The PCIe controller in rk3568 and rk3588 can operate in endpoint mode. This endpoint mode support heavily leverages the existing code in pcie-designware-ep.c. Add support for endpoint mode to the existing pcie-dw-rockchip glue driver. [kwilczynski: squash with patch adding the PCI_ENDPOINT dependency] Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-10-0a042d6b0049@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> 
The PCIe controller in rk3568 and rk3588 can operate in endpoint mode.

This endpoint mode support heavily leverages the existing code in
pcie-designware-ep.c.

Add support for endpoint mode to the existing pcie-dw-rockchip glue
driver.

[kwilczynski: squash with patch adding the PCI_ENDPOINT dependency]
Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-10-0a042d6b0049@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host mode 2023-10-23T12:40:10+00:00 Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com 2023-10-18T08:56:28+00:00 0d0c551011df4519c232f7114cdace9000e86c51 Add R-Car Gen4 PCIe controller support for host mode. This controller is based on Synopsys DesignWare PCIe. However, this particular controller has a number of vendor-specific registers, and as such, requires initialization code like mode setting and retraining and so on. Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-13-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> 
Add R-Car Gen4 PCIe controller support for host mode.

This controller is based on Synopsys DesignWare PCIe. However, this
particular controller has a number of vendor-specific registers, and as
such, requires initialization code like mode setting and retraining and
so on.

Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-13-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
PCI: dwc: Add Baikal-T1 PCIe controller support 2022-11-23T15:01:55+00:00 Serge Semin Sergey.Semin@baikalelectronics.ru 2022-11-13T19:13:01+00:00 ba6ed462dcf41a83b36eb9a74a8c4720040f9762 Baikal-T1 SoC is equipped with DWC PCIe v4.60a host controller. It can be trained to work up to Gen.3 speed over up to x4 lanes. The host controller is attached to the DW PCIe 3.0 PCS via the PIPE-4 interface, which in its turn is connected to the DWC 10G PHY. The whole system is supposed to be fed up with four clock sources: DBI peripheral clock, AXI application clocks and external PHY/core reference clock generating the 100MHz signal. In addition to that the platform provide a way to reset each part of the controller: sticky/non-sticky bits, host controller core, PIPE interface, PCS/PHY and Hot/Power reset signal. The driver also provides a way to handle the GPIO-based PERST# signal. Note due to the Baikal-T1 MMIO peculiarity we have to implement the DBI interface accessors which make sure the IO operations are dword-aligned. Link: https://lore.kernel.org/r/20221113191301.5526-21-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> 
Baikal-T1 SoC is equipped with DWC PCIe v4.60a host controller. It can be
trained to work up to Gen.3 speed over up to x4 lanes. The host controller
is attached to the DW PCIe 3.0 PCS via the PIPE-4 interface, which in its
turn is connected to the DWC 10G PHY. The whole system is supposed to be
fed up with four clock sources: DBI peripheral clock, AXI application
clocks and external PHY/core reference clock generating the 100MHz signal.
In addition to that the platform provide a way to reset each part of the
controller: sticky/non-sticky bits, host controller core, PIPE interface,
PCS/PHY and Hot/Power reset signal. The driver also provides a way to
handle the GPIO-based PERST# signal.

Note due to the Baikal-T1 MMIO peculiarity we have to implement the DBI
interface accessors which make sure the IO operations are dword-aligned.

Link: https://lore.kernel.org/r/20221113191301.5526-21-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver 2021-10-11T20:34:02+00:00 Manivannan Sadhasivam manivannan.sadhasivam@linaro.org 2021-09-20T06:59:45+00:00 f55fee56a631032969480e4b0ee5d79734fe3c69 Add driver for Qualcomm PCIe Endpoint controller based on the DesignWare core with added Qualcomm-specific wrapper around the core. The driver support is very basic such that it supports only enumeration, PCIe read/write, and MSI. There is no ASPM and PM support for now but these will be added later. The driver is capable of using the PERST# and WAKE# side-band GPIOs for operation and written on top of the DWC PCI framework. [bhelgaas: wrap a few long lines] Co-developed-by: Siddartha Mohanadoss <smohanad@codeaurora.org> [mani: restructured the driver and fixed several bugs for upstream] Link: https://lore.kernel.org/r/20210920065946.15090-3-manivannan.sadhasivam@linaro.org Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> 
Add driver for Qualcomm PCIe Endpoint controller based on the DesignWare
core with added Qualcomm-specific wrapper around the core. The driver
support is very basic such that it supports only enumeration, PCIe
read/write, and MSI. There is no ASPM and PM support for now but these will
be added later.

The driver is capable of using the PERST# and WAKE# side-band GPIOs for
operation and written on top of the DWC PCI framework.

[bhelgaas: wrap a few long lines]
Co-developed-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
[mani: restructured the driver and fixed several bugs for upstream]
Link: https://lore.kernel.org/r/20210920065946.15090-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Merge branch 'remotes/lorenzo/pci/keembay' 2021-09-02T19:56:48+00:00 Bjorn Helgaas bhelgaas@google.com 2021-09-02T19:56:48+00:00 af42a0d4a88b658e848d4c27732203a364788b2d - Add Intel Keem Bay PCIe controller driver and DT binding (Srikanth Thokala) * remotes/lorenzo/pci/keembay: PCI: keembay: Add support for Intel Keem Bay dt-bindings: PCI: Add Intel Keem Bay PCIe controller 
- Add Intel Keem Bay PCIe controller driver and DT binding (Srikanth
  Thokala)

* remotes/lorenzo/pci/keembay:
  PCI: keembay: Add support for Intel Keem Bay
  dt-bindings: PCI: Add Intel Keem Bay PCIe controller
Merge branch 'pci/visconti' 2021-09-02T19:56:46+00:00 Bjorn Helgaas bhelgaas@google.com 2021-09-02T19:56:46+00:00 a549a33c37ef081593dff266f0c3a9e78a28bdf0 - Add Toshiba Visconti PCIe host controller driver (Nobuhiro Iwamatsu) * pci/visconti: MAINTAINERS: Add entries for Toshiba Visconti PCIe controller PCI: visconti: Add Toshiba Visconti PCIe host controller driver 
- Add Toshiba Visconti PCIe host controller driver (Nobuhiro Iwamatsu)

* pci/visconti:
  MAINTAINERS: Add entries for Toshiba Visconti PCIe controller
  PCI: visconti: Add Toshiba Visconti PCIe host controller driver
PCI: rockchip-dwc: Add Rockchip RK356X host controller driver 2021-08-31T19:58:20+00:00 Simon Xue xxm@rock-chips.com 2021-06-25T06:55:11+00:00 0e898eb8df4e34c7b129452444eb7cef68a11f43 Add a driver for the DesignWare-based PCIe controller found on RK356X. The existing pcie-rockchip-host driver is only used for the Rockchip-designed IP found on RK3399. Link: https://lore.kernel.org/r/20210625065511.1096935-1-xxm@rock-chips.com Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Simon Xue <xxm@rock-chips.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Rob Herring <robh@kernel.org> 
Add a driver for the DesignWare-based PCIe controller found on
RK356X. The existing pcie-rockchip-host driver is only used for
the Rockchip-designed IP found on RK3399.

Link: https://lore.kernel.org/r/20210625065511.1096935-1-xxm@rock-chips.com
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Rob Herring <robh@kernel.org>
PCI: visconti: Add Toshiba Visconti PCIe host controller driver 2021-08-31T19:52:05+00:00 Nobuhiro Iwamatsu nobuhiro1.iwamatsu@toshiba.co.jp 2021-08-11T08:38:29+00:00 da36024a4e838b52408cf3d04999ae934728092a Add support for the PCIe RC controller on Toshiba Visconti ARM SoCs. This PCIe controller is based on the Synopsys DesignWare PCIe core. Link: https://lore.kernel.org/r/20210811083830.784065-3-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> 
Add support for the PCIe RC controller on Toshiba Visconti ARM SoCs.  This
PCIe controller is based on the Synopsys DesignWare PCIe core.

Link: https://lore.kernel.org/r/20210811083830.784065-3-nobuhiro1.iwamatsu@toshiba.co.jp
Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
PCI: keembay: Add support for Intel Keem Bay 2021-08-20T12:47:05+00:00 Srikanth Thokala srikanth.thokala@intel.com 2021-08-05T21:10:10+00:00 0c87f90b4c13586a00fbe63524c7be197609d8dc Add driver for Intel Keem Bay SoC PCIe controller. This controller is based on DesignWare PCIe core. In Root Complex mode, only internal reference clock is possible for Keem Bay A0. For Keem Bay B0, external reference clock can be used and will be the default configuration. Currently, keembay_pcie_of_data structure has one member. It will be expanded later to handle this difference. Endpoint mode link initialization is handled by the boot firmware. Link: https://lore.kernel.org/r/20210805211010.29484-3-srikanth.thokala@intel.com Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Signed-off-by: Srikanth Thokala <srikanth.thokala@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> 
Add driver for Intel Keem Bay SoC PCIe controller. This controller
is based on DesignWare PCIe core.

In Root Complex mode, only internal reference clock is possible for
Keem Bay A0. For Keem Bay B0, external reference clock can be used
and will be the default configuration. Currently, keembay_pcie_of_data
structure has one member. It will be expanded later to handle this
difference.

Endpoint mode link initialization is handled by the boot firmware.

Link: https://lore.kernel.org/r/20210805211010.29484-3-srikanth.thokala@intel.com
Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
Signed-off-by: Srikanth Thokala <srikanth.thokala@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>