Pull more block updates from Jens Axboe:
 "Some later additions that weren't quite done for the first pull
  request, and also a few fixes that have arrived since.

  This contains:

   - Kill silly pktcdvd warning on attempting to register a non-scsi
     passthrough device (me)

   - Use symbolic constants for the block t10 protection types, and
     switch to handling it in core rather than in the drivers (Max)

   - libahci platform missing node put fix (Nishka)

   - Small series of fixes for BFQ (Paolo)

   - Fix possible nbd crash (Xiubo)"

* tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block:
  block: drop device references in bsg_queue_rq()
  block: t10-pi: fix -Wswitch warning
  pktcdvd: remove warning on attempting to register non-passthrough dev
  ata: libahci_platform: Add of_node_put() before loop exit
  nbd: fix possible page fault for nbd disk
  nbd: rename the runtime flags as NBD_RT_ prefixed
  block, bfq: push up injection only after setting service time
  block, bfq: increase update frequency of inject limit
  block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1
  block, bfq: update inject limit only after injection occurred
  block: centralize PI remapping logic to the block layer
  block: use symbolic constants for t10_pi type

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it
     (Krzysztof Wilczynski)

   - Fix incorrect PCIe device types and remove dev->has_secondary_link
     to simplify code that deals with upstream/downstream ports (Mika
     Westerberg)

   - After suspend, restore Resizable BAR size bits correctly for 1MB
     BARs (Sumit Saxena)

   - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra)

  Virtualization:

   - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna
     Labs (Ali Saidi)

   - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg)

   - Remove group write permissions from sysfs sriov_numvfs,
     sriov_drivers_autoprobe (Kelsey Skunberg)

  Hotplug:

   - Simplify pciehp indicator control (Denis Efremov)

  Peer-to-peer DMA:

   - Allow P2P DMA between root ports for whitelisted bridges (Logan
     Gunthorpe)

   - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe)

   - DMA map P2P DMA requests that traverse host bridge (Logan
     Gunthorpe)

  Amazon Annapurna Labs host bridge driver:

   - Add DT binding and controller driver (Jonathan Chocron)

  Hyper-V host bridge driver:

   - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui)

   - Fix PCI domain number collisions (Haiyang Zhang)

   - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang)

   - Fix build errors on non-SYSFS config (Randy Dunlap)

  i.MX6 host bridge driver:

   - Limit DBI register length (Stefan Agner)

  Intel VMD host bridge driver:

   - Fix config addressing issues (Jon Derrick)

  Layerscape host bridge driver:

   - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao)

   - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately
     (Xiaowei Bao)

  Mediatek host bridge driver:

   - Add MT7629 controller support (Jianjun Wang)

  Mobiveil host bridge driver:

   - Fix CPU base address setup (Hou Zhiqiang)

   - Make "num-lanes" property optional (Hou Zhiqiang)

  Tegra host bridge driver:

   - Fix OF node reference leak (Nishka Dasgupta)

   - Disable MSI for root ports to work around design problem (Vidya
     Sagar)

   - Add Tegra194 DT binding and controller support (Vidya Sagar)

   - Add support for sideband pins and slot regulators (Vidya Sagar)

   - Add PIPE2UPHY support (Vidya Sagar)

  Misc:

   - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg)

   - Unexport pci_bus_get(), etc (Kelsey Skunberg)

   - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in
     the PCI core (Kelsey Skunberg)

   - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg)

   - Mark expected switch fall-through (Gustavo A. R. Silva)

   - Propagate errors for optional regulators and PHYs (Thierry Reding)

   - Fix kernel command line resource_alignment parameter issues (Logan
     Gunthorpe)"

* tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits)
  PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI
  arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
  arm64: tegra: Add configuration for PCIe C5 sideband signals
  PCI: tegra: Add support to enable slot regulators
  PCI: tegra: Add support to configure sideband pins
  PCI: vmd: Fix shadow offsets to reflect spec changes
  PCI: vmd: Fix config addressing when using bus offsets
  PCI: dwc: Add validation that PCIe core is set to correct mode
  PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver
  dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding
  PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port
  PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port
  PCI: Add ACS quirk for Amazon Annapurna Labs root ports
  PCI: Add Amazon's Annapurna Labs vendor ID
  MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer
  PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers
  dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
  dt-bindings: PCI: tegra: Add sideband pins configuration entries
  PCI: tegra: Add Tegra194 PCIe support
  PCI: Get rid of dev->has_secondary_link flag
  ...

Currently t10_pi_prepare/t10_pi_complete functions are called during the
NVMe and SCSi layers command preparetion/completion, but their actual
place should be the block layer since T10-PI is a general data integrity
feature that is used by block storage protocols. Introduce .prepare_fn
and .complete_fn callbacks within the integrity profile that each type
can implement according to its needs.

Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>

Fixed to not call queue integrity functions if BLK_DEV_INTEGRITY
isn't defined in the config.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull block updates from Jens Axboe:

 - Two NVMe pull requests:
     - ana log parse fix from Anton
     - nvme quirks support for Apple devices from Ben
     - fix missing bio completion tracing for multipath stack devices
       from Hannes and Mikhail
     - IP TOS settings for nvme rdma and tcp transports from Israel
     - rq_dma_dir cleanups from Israel
     - tracing for Get LBA Status command from Minwoo
     - Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
     - Some consolidation between the fabrics transports for handling
       the CAP register
     - reset race with ns scanning fix for fabrics (move fabrics
       commands to a dedicated request queue with a different lifetime
       from the admin request queue)."
     - controller reset and namespace scan races fixes
     - nvme discovery log change uevent support
     - naming improvements from Keith
     - multiple discovery controllers reject fix from James
     - some regular cleanups from various people

 - Series fixing (and re-fixing) null_blk debug printing and nr_devices
   checks (André)

 - A few pull requests from Song, with fixes from Andy, Guoqing,
   Guilherme, Neil, Nigel, and Yufen.

 - REQ_OP_ZONE_RESET_ALL support (Chaitanya)

 - Bio merge handling unification (Christoph)

 - Pick default elevator correctly for devices with special needs
   (Damien)

 - Block stats fixes (Hou)

 - Timeout and support devices nbd fixes (Mike)

 - Series fixing races around elevator switching and device add/remove
   (Ming)

 - sed-opal cleanups (Revanth)

 - Per device weight support for BFQ (Fam)

 - Support for blk-iocost, a new model that can properly account cost of
   IO workloads. (Tejun)

 - blk-cgroup writeback fixes (Tejun)

 - paride queue init fixes (zhengbin)

 - blk_set_runtime_active() cleanup (Stanley)

 - Block segment mapping optimizations (Bart)

 - lightnvm fixes (Hans/Minwoo/YueHaibing)

 - Various little fixes and cleanups

* tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits)
  null_blk: format pr_* logs with pr_fmt
  null_blk: match the type of parameter nr_devices
  null_blk: do not fail the module load with zero devices
  block: also check RQF_STATS in blk_mq_need_time_stamp()
  block: make rq sector size accessible for block stats
  bfq: Fix bfq linkage error
  raid5: use bio_end_sector in r5_next_bio
  raid5: remove STRIPE_OPS_REQ_PENDING
  md: add feature flag MD_FEATURE_RAID0_LAYOUT
  md/raid0: avoid RAID0 data corruption due to layout confusion.
  raid5: don't set STRIPE_HANDLE to stripe which is in batch list
  raid5: don't increment read_errors on EILSEQ return
  nvmet: fix a wrong error status returned in error log page
  nvme: send discovery log page change events to userspace
  nvme: add uevent variables for controller devices
  nvme: enable aen regardless of the presence of I/O queues
  nvme-fabrics: allow discovery subsystems accept a kato
  nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
  nvme: Remove redundant assignment of cq vector
  nvme: Assign subsys instance from first ctrl
  ...

When the command data_len cannot hold all the controller errors,
we should simply return as much errors as we can fit
instead of failing the command.

Signed-off-by: Amit Engel <amit.engel@dell.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

If the controller supports discovery log page change events,
we want to enable it. When we see a discovery log change event
we will send it up to userspace and expect it to handle it.

Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

When we send uevents to userspace, add controller specific
environment variables to uniquly identify the controller beyond
its device name.

This will be useful to address discovery log change events by
actually verifying that the discovery controller is indeed the
same as the device that generated the event.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

AENs in general are not related to the presence of I/O queues,
so enable them regardless. Note that the only exception is that
discovery controller will not support any of the requested AENs
and nvme_enable_aen will respect that and return, so it is still
safe to enable regardless.

Note it is safe to enable AENs even before the initial namespace
scanning as we have the scan operation in a workqueue context.

Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

This modifies the behavior of discovery subsystems to accept
a kato as a preparation to support discovery log change
events. This also means that now every discovery controller
will have a default kato value, and for non-persistent connections
the host needs to pass in a zero kato value (keep_alive_tmo=0).

Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

Simplify this function implementation by using a known function.

Generated by: scripts/coccinelle/api/ptr_ret.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>