linux.git/drivers/nvme, branch v4.13-rc4

nvme: validate admin queue before unquiesce

2017-07-26T15:41:41+00:00

With a misbehaving controller it's possible we'll never
enter the live state and create an admin queue. When we
fail out of reset work it's possible we failed out early
enough without setting up the admin queue. We tear down
queues after a failed reset, but needed to do some more
sanitization.

Fixes 443bd90f2cca: "nvme: host: unquiesce queue in nvme_kill_queues()"

[  189.650995] nvme nvme1: pci function 0000:0b:00.0
[  317.680055] nvme nvme0: Device not ready; aborting reset
[  317.680183] nvme nvme0: Removing after probe failure status: -19
[  317.681258] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  317.681397] general protection fault: 0000 [#1] SMP KASAN
[  317.682984] CPU: 3 PID: 477 Comm: kworker/3:2 Not tainted 4.13.0-rc1+ #5
[  317.683112] Hardware name: Gigabyte Technology Co., Ltd. Z170X-UD5/Z170X-UD5-CF, BIOS F5 03/07/2016
[  317.683284] Workqueue: events nvme_remove_dead_ctrl_work [nvme]
[  317.683398] task: ffff8803b0990000 task.stack: ffff8803c2ef0000
[  317.683516] RIP: 0010:blk_mq_unquiesce_queue+0x2b/0xa0
[  317.683614] RSP: 0018:ffff8803c2ef7d40 EFLAGS: 00010282
[  317.683716] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 1ffff1006fbdcde3
[  317.683847] RDX: 0000000000000038 RSI: 1ffff1006f5a9245 RDI: 0000000000000000
[  317.683978] RBP: ffff8803c2ef7d58 R08: 1ffff1007bcdc974 R09: 0000000000000000
[  317.684108] R10: 1ffff1007bcdc975 R11: 0000000000000000 R12: 00000000000001c0
[  317.684239] R13: ffff88037ad49228 R14: ffff88037ad492d0 R15: ffff88037ad492e0
[  317.684371] FS:  0000000000000000(0000) GS:ffff8803de6c0000(0000) knlGS:0000000000000000
[  317.684519] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  317.684627] CR2: 0000002d1860c000 CR3: 000000045b40d000 CR4: 00000000003406e0
[  317.684758] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  317.684888] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  317.685018] Call Trace:
[  317.685084]  nvme_kill_queues+0x4d/0x170 [nvme_core]
[  317.685185]  nvme_remove_dead_ctrl_work+0x3a/0x90 [nvme]
[  317.685289]  process_one_work+0x771/0x1170
[  317.685372]  worker_thread+0xde/0x11e0
[  317.685452]  ? pci_mmcfg_check_reserved+0x110/0x110
[  317.685550]  kthread+0x2d3/0x3d0
[  317.685617]  ? process_one_work+0x1170/0x1170
[  317.685704]  ? kthread_create_on_node+0xc0/0xc0
[  317.685785]  ret_from_fork+0x25/0x30
[  317.685798] Code: 0f 1f 44 00 00 55 48 b8 00 00 00 00 00 fc ff df 48 89 e5 41 54 4c 8d a7 c0 01 00 00 53 48 89 fb 4c 89 e2 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 75 50 48 8b bb c0 01 00 00 e8 33 8a f9 00 0f ba b3
[  317.685872] RIP: blk_mq_unquiesce_queue+0x2b/0xa0 RSP: ffff8803c2ef7d40
[  317.685908] ---[ end trace a3f8704150b1e8b4 ]---

Signed-off-by: Scott Bauer 
Signed-off-by: Christoph Hellwig

nvme-pci: fix HMB size calculation

2017-07-25T16:05:33+00:00

It's possible the preferred HMB size may not be a multiple of the
chunk_size. This patch moves len to function scope and uses that in
the for loop increment so the last iteration doesn't cause the total
size to exceed the allocated HMB size.

Based on an earlier patch from Keith Busch.

Signed-off-by: Christoph Hellwig 
Reported-by: Dan Carpenter 
Reviewed-by: Keith Busch 
Fixes: 87ad72a59a38 ("nvme-pci: implement host memory buffer support")

nvme-fc: revise TRADDR parsing

2017-07-25T16:05:25+00:00

The FC-NVME spec hasn't locked down on the format string for TRADDR.
Currently the spec is lobbying for "nn-<16hexdigits>:pn-<16hexdigits>"
where the wwn's are hex values but not prefixed by 0x.

Most implementations so far expect a string format of
"nn-0x<16hexdigits>:pn-0x<16hexdigits>" to be used. The transport
uses the match_u64 parser which requires a leading 0x prefix to set
the base properly. If it's not there, a match will either fail or return
a base 10 value.

The resolution in T11 is pushing out. Therefore, to fix things now and
to cover any eventuality and any implementations already in the field,
this patch adds support for both formats.

The change consists of replacing the token matching routine with a
routine that validates the fixed string format, and then builds
a local copy of the hex name with a 0x prefix before calling
the system parser.

Note: the same parser routine exists in both the initiator and target
transports. Given this is about the only "shared" item, we chose to
replicate rather than create an interdendency on some shared code.

Signed-off-by: James Smart 
Signed-off-by: Christoph Hellwig

nvme-fc: address target disconnect race conditions in fcp io submit

2017-07-25T15:58:47+00:00

There are cases where threads are in the process of submitting new
io when the LLDD calls in to remove the remote port. In some cases,
the next io actually goes to the LLDD, who knows the remoteport isn't
present and rejects it. To properly recovery/restart these i/o's we
don't want to hard fail them, we want to treat them as temporary
resource errors in which a delayed retry will work.

Add a couple more checks on remoteport connectivity and commonize the
busy response handling when it's seen.

Signed-off-by: James Smart 
Signed-off-by: Christoph Hellwig

nvme: also provide a UUID in the WWID sysfs attribute

2017-07-25T15:58:22+00:00

The WWID sysfs attribute can provide multiple means of a World Wide ID
for a NVMe device. It can either be a NGUID, a EUI-64 or a concatenation
of VID, Serial Number, Model and the Namespace ID in this order of
preference.

If the target also sends us a UUID use the UUID for identification and
give it the highest priority.

This eases generation of /dev/disk/by-* symlinks.

Signed-off-by: Johannes Thumshirn 
Signed-off-by: Christoph Hellwig

nvmet: don't report 0-bytes in serial number

2017-07-20T14:41:56+00:00

The NVME standard mandates that the SN, MN, and FR fields of the Identify
Controller Data Structure be "ASCII strings".  That means that they may
not contain 0-bytes, not even string terminators.

Signed-off-by: Martin Wilck 
Reviewed-by: Hannes Reinecke 
[hch: fixed for the move of the serial field, updated description]
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

nvmet: preserve controller serial number between reboots

2017-07-20T14:41:56+00:00

The NVMe target has no way to preserve controller serial
IDs across reboots which breaks udev scripts doing
SYMLINK+="dev/disk/by-id/nvme-$env{ID_SERIAL}-part%n.

Export the randomly generated serial number via configfs and allow
setting of a serial via configfs to mitigate this breakage.

Signed-off-by: Johannes Thumshirn 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

nvmet: Move serial number from controller to subsystem

2017-07-20T14:41:56+00:00

The NVMe specification defines the serial number as:

"Serial Number (SN): Contains the serial number for the NVM subsystem
that is assigned by the vendor as an ASCII string. Refer to section
7.10 for unique identifier requirements. Refer to section 1.5 for ASCII
string requirements"

So move it from the controller to the subsystem, where it belongs.

Signed-off-by: Johannes Thumshirn 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

nvmet: prefix version configfs file with attr

2017-07-20T14:41:56+00:00

The NVMe target's attribute files need an attr prefix in order to have
nvmetcli recognize them. Add this attribute.

Signed-off-by: Johannes Thumshirn 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

nvme-pci: Fix an error handling path in 'nvme_probe()'

2017-07-20T14:41:56+00:00

Release resources in the correct order in order not to miss a
'put_device()' if 'nvme_dev_map()' fails.

Fixes: b00a726a9fd8 ("NVMe: Don't unmap controller registers on reset")
Signed-off-by: Christophe JAILLET 
Reviewed-by: Keith Busch 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe