linux.git/drivers/nvme/target/loop.c, branch v5.8

nvme-loop: initialize tagset numa value to the value of the ctrl

2020-06-24T16:37:08+00:00

Both admin's and drive's tagsets should be set according the numa
node of the controller.

Signed-off-by: Max Gurtovoy 
Signed-off-by: Christoph Hellwig

nvme: Make nvme_uninit_ctrl symmetric to nvme_init_ctrl

2020-03-25T19:51:56+00:00

Put the ctrl reference count at nvme_uninit_ctrl as opposed to
nvme_init_ctrl which takes it. This decrease the reference count at the
core layer instead of decreasing it on each transport separately.
Also move the call of nvme_uninit_ctrl at PCI driver after calling to
nvme_release_prp_pools and nvme_dev_unmap, in order to put the reference
count after using the dev. This is safe because those functions use
nvme_dev which is freed only later at nvme_pci_free_ctrl.

Signed-off-by: Israel Rukshin 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Keith Busch

nvme: Fix ctrl use-after-free during sysfs deletion

2020-03-25T19:51:56+00:00

In case nvme_sysfs_delete() is called by the user before taking the ctrl
reference count, the ctrl may be freed during the creation and cause the
bug. Take the reference as soon as the controller is externally visible,
which is done by cdev_device_add() in nvme_init_ctrl(). Also take the
reference count at the core layer instead of taking it on each transport
separately.

Signed-off-by: Israel Rukshin 
Reviewed-by: Max Gurtovoy 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Keith Busch

nvmet-loop: Avoid preallocating big SGL for data

2019-11-26T17:14:19+00:00

nvme_loop_create_io_queues() preallocates a big buffer for the IO SGL based
on SG_CHUNK_SIZE.

Modern DMA engines are often capable of dealing with very big segments so
the SG_CHUNK_SIZE is often too big. SG_CHUNK_SIZE results in a static 4KB
SGL allocation per command.

If a controller has lots of deep queues, preallocation for the sg list can
consume substantial amounts of memory. For nvmet-loop, nr_hw_queues can be
128 and each queue's depth 128. This means the resulting preallocation
for the data SGL is 128*128*4K = 64MB per controller.

Switch to runtime allocation for SGL for lists longer than 2 entries. This
is the approach used by NVMe PCI so it should be reasonable for NVMeOF as
well. Runtime SGL allocation has always been the case for the legacy I/O
path so this is nothing new.

Tested-by: Chaitanya Kulkarni 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Chaitanya Kulkarni 
Reviewed-by: Max Gurtovoy 
Signed-off-by: Israel Rukshin 
Signed-off-by: Keith Busch

Merge tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block

2019-11-25T19:15:41+00:00

Pull block driver updates from Jens Axboe:
 "Here are the main block driver updates for 5.5. Nothing major in here,
  mostly just fixes. This contains:

   - a set of bcache changes via Coly

   - MD changes from Song

   - loop unmap write-zeroes fix (Darrick)

   - spelling fixes (Geert)

   - zoned additions cleanups to null_blk/dm (Ajay)

   - allow null_blk online submit queue changes (Bart)

   - NVMe changes via Keith, nothing major here either"

* tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block: (56 commits)
  Revert "bcache: fix fifo index swapping condition in journal_pin_cmp()"
  drivers/md/raid5-ppl.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
  drivers/md/raid5.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
  bcache: don't export symbols
  bcache: remove the extra cflags for request.o
  bcache: at least try to shrink 1 node in bch_mca_scan()
  bcache: add idle_max_writeback_rate sysfs interface
  bcache: add code comments in bch_btree_leaf_dirty()
  bcache: fix deadlock in bcache_allocator
  bcache: add code comment bch_keylist_pop() and bch_keylist_pop_front()
  bcache: deleted code comments for dead code in bch_data_insert_keys()
  bcache: add more accurate error messages in read_super()
  bcache: fix static checker warning in bcache_device_free()
  bcache: fix a lost wake-up problem caused by mca_cannibalize_lock
  bcache: fix fifo index swapping condition in journal_pin_cmp()
  md/raid10: prevent access of uninitialized resync_pages offset
  md: avoid invalid memory access for array sb->dev_roles
  md/raid1: avoid soft lockup under high load
  null_blk: add zone open, close, and finish support
  dm: add zone open, close and finish support
  ...

nvmet: Open code nvmet_req_execute()

2019-11-04T17:56:42+00:00

Now that nvmet_req_execute does nothing, open code it.

Reviewed-by: Chaitanya Kulkarni 
Signed-off-by: Christoph Hellwig 
[split patch, update changelog]
Signed-off-by: Logan Gunthorpe 
Signed-off-by: Keith Busch 
Signed-off-by: Jens Axboe

nvme: move common call to nvme_cleanup_cmd to core layer

2019-11-04T17:56:41+00:00

nvme_cleanup_cmd should be called for each call to nvme_setup_cmd
(symmetrical functions). Move the call for nvme_cleanup_cmd to the common
core layer and call it during nvme_complete_rq for the good flow. For
error flow, each transport will call nvme_cleanup_cmd independently. Also
take care of a special case of path failure, where we call
nvme_complete_rq without doing nvme_setup_cmd.

Signed-off-by: Max Gurtovoy 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Keith Busch 
Signed-off-by: Jens Axboe

nvme: introduce nvme_is_aen_req function

2019-11-04T17:56:40+00:00

This function improves code readability and reduces code duplication.

Signed-off-by: Israel Rukshin 
Signed-off-by: Max Gurtovoy 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Keith Busch 
Signed-off-by: Jens Axboe

nvmet-loop: fix possible leakage during error flow

2019-10-15T13:47:28+00:00

During nvme_loop_queue_rq error flow, one must call nvme_cleanup_cmd since
it's symmetric to nvme_setup_cmd.

Signed-off-by: Max Gurtovoy 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Keith Busch

Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block

2019-09-17T23:57:47+00:00

Pull block updates from Jens Axboe:

 - Two NVMe pull requests:
     - ana log parse fix from Anton
     - nvme quirks support for Apple devices from Ben
     - fix missing bio completion tracing for multipath stack devices
       from Hannes and Mikhail
     - IP TOS settings for nvme rdma and tcp transports from Israel
     - rq_dma_dir cleanups from Israel
     - tracing for Get LBA Status command from Minwoo
     - Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
     - Some consolidation between the fabrics transports for handling
       the CAP register
     - reset race with ns scanning fix for fabrics (move fabrics
       commands to a dedicated request queue with a different lifetime
       from the admin request queue)."
     - controller reset and namespace scan races fixes
     - nvme discovery log change uevent support
     - naming improvements from Keith
     - multiple discovery controllers reject fix from James
     - some regular cleanups from various people

 - Series fixing (and re-fixing) null_blk debug printing and nr_devices
   checks (André)

 - A few pull requests from Song, with fixes from Andy, Guoqing,
   Guilherme, Neil, Nigel, and Yufen.

 - REQ_OP_ZONE_RESET_ALL support (Chaitanya)

 - Bio merge handling unification (Christoph)

 - Pick default elevator correctly for devices with special needs
   (Damien)

 - Block stats fixes (Hou)

 - Timeout and support devices nbd fixes (Mike)

 - Series fixing races around elevator switching and device add/remove
   (Ming)

 - sed-opal cleanups (Revanth)

 - Per device weight support for BFQ (Fam)

 - Support for blk-iocost, a new model that can properly account cost of
   IO workloads. (Tejun)

 - blk-cgroup writeback fixes (Tejun)

 - paride queue init fixes (zhengbin)

 - blk_set_runtime_active() cleanup (Stanley)

 - Block segment mapping optimizations (Bart)

 - lightnvm fixes (Hans/Minwoo/YueHaibing)

 - Various little fixes and cleanups

* tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits)
  null_blk: format pr_* logs with pr_fmt
  null_blk: match the type of parameter nr_devices
  null_blk: do not fail the module load with zero devices
  block: also check RQF_STATS in blk_mq_need_time_stamp()
  block: make rq sector size accessible for block stats
  bfq: Fix bfq linkage error
  raid5: use bio_end_sector in r5_next_bio
  raid5: remove STRIPE_OPS_REQ_PENDING
  md: add feature flag MD_FEATURE_RAID0_LAYOUT
  md/raid0: avoid RAID0 data corruption due to layout confusion.
  raid5: don't set STRIPE_HANDLE to stripe which is in batch list
  raid5: don't increment read_errors on EILSEQ return
  nvmet: fix a wrong error status returned in error log page
  nvme: send discovery log page change events to userspace
  nvme: add uevent variables for controller devices
  nvme: enable aen regardless of the presence of I/O queues
  nvme-fabrics: allow discovery subsystems accept a kato
  nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
  nvme: Remove redundant assignment of cq vector
  nvme: Assign subsys instance from first ctrl
  ...