linux.git/drivers/nvme/target/io-cmd-bdev.c, branch v6.7

nvmet: Convert to bdev_open_by_path()

2023-10-28T11:29:18+00:00

Convert nvmet to use bdev_open_by_path() and pass the handle around.

CC: linux-nvme@lists.infradead.org
Acked-by: Christoph Hellwig 
Acked-by: Christian Brauner 
Reviewed-by: Chaitanya Kulkarni 
Signed-off-by: Jan Kara 
Link: https://lore.kernel.org/r/20230927093442.25915-13-jack@suse.cz
Signed-off-by: Christian Brauner

bio-integrity: update the payload size in bio_integrity_add_page()

2023-08-09T22:05:35+00:00

Previously, the bip's bi_size has been set before an integrity pages
were added. If a problem occurs in the process of adding pages for
bip, the bi_size mismatch problem must be dealt with.

When the page is successfully added to bvec, the bi_size is updated.

The parts affected by the change were also contained in this commit.

Cc: Christoph Hellwig 
Cc: Martin K. Petersen 

Reviewed-by: Christoph Hellwig 
Signed-off-by: Jinyoung Choi 
Tested-by: "Martin K. Petersen" 
Reviewed-by: "Martin K. Petersen" 
Link: https://lore.kernel.org/r/20230803024956epcms2p38186a17392706650c582d38ef3dbcd32@epcms2p3
Signed-off-by: Jens Axboe

block: replace fmode_t with a block-specific type for block open flags

2023-06-12T14:04:05+00:00

The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE.  Define a new
blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and
->ioctl and stop abusing fmode_t.

Signed-off-by: Christoph Hellwig 
Acked-by: Jack Wang 		[rnbd]
Reviewed-by: Hannes Reinecke 
Reviewed-by: Christian Brauner 
Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de
Signed-off-by: Jens Axboe

block: use the holder as indication for exclusive opens

2023-06-12T14:04:04+00:00

The current interface for exclusive opens is rather confusing as it
requires both the FMODE_EXCL flag and a holder.  Remove the need to pass
FMODE_EXCL and just key off the exclusive open off a non-NULL holder.

For blkdev_put this requires adding the holder argument, which provides
better debug checking that only the holder actually releases the hold,
but at the same time allows removing the now superfluous mode argument.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Hannes Reinecke 
Acked-by: Christian Brauner 
Acked-by: David Sterba 		[btrfs]
Acked-by: Jack Wang 		[rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-16-hch@lst.de
Signed-off-by: Jens Axboe

block: introduce holder ops

2023-06-05T16:53:04+00:00

Add a new blk_holder_ops structure, which is passed to blkdev_get_by_* and
installed in the block_device for exclusive claims.  It will be used to
allow the block layer to call back into the user of the block device for
thing like notification of a removed device or a device resize.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Jan Kara 
Acked-by: Dave Chinner 
Reviewed-by: Dave Chinner 
Link: https://lore.kernel.org/r/20230601094459.1350643-10-hch@lst.de
Signed-off-by: Jens Axboe

nvmet: don't look at the request_queue in nvmet_bdev_set_limits

2022-09-27T16:51:50+00:00

nvmet is a consumer of the block layer and should not directly look at
the request_queue.  Use the bdev_ helpers to retrieve the device limits
instead.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Keith Busch

nvmet: avoid unnecessary flush bio

2022-09-19T09:33:54+00:00

For no volatile write cache block device backend, sending flush bio is
unnecessary, avoid to do that.

Signed-off-by: Guixin Liu 
Reviewed-by: Chaitanya Kulkarni 
Signed-off-by: Christoph Hellwig

nvme/target: Use the new blk_opf_t type

2022-07-14T18:14:32+00:00

Improve static type checking by using the new blk_opf_t type for variables
that represent a request operation combined with request flags. Rename
those variables from 'op' into 'opf'.

Cc: Sagi Grimberg 
Cc: Christoph Hellwig 
Cc: Chaitanya Kulkarni 
Signed-off-by: Bart Van Assche 
Link: https://lore.kernel.org/r/20220714180729.1065367-39-bvanassche@acm.org
Signed-off-by: Jens Axboe

block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD

2022-04-18T01:49:59+00:00

Secure erase is a very different operation from discard in that it is
a data integrity operation vs hint.  Fully split the limits and helper
infrastructure to make the separation more clear.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Martin K. Petersen 
Acked-by: Christoph Böhmwalder  [drbd]
Acked-by: Ryusuke Konishi  [nifs2]
Acked-by: Jaegeuk Kim  [f2fs]
Acked-by: Coly Li  [bcache]
Acked-by: David Sterba  [btrfs]
Acked-by: Chao Yu 
Reviewed-by: Chaitanya Kulkarni 
Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de
Signed-off-by: Jens Axboe

Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache

2022-03-23T00:03:12+00:00

Pull folio updates from Matthew Wilcox:

 - Rewrite how munlock works to massively reduce the contention on
   i_mmap_rwsem (Hugh Dickins):

     https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/

 - Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
   Hellwig):

     https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/

 - Convert GUP to use folios and make pincount available for order-1
   pages. (Matthew Wilcox)

 - Convert a few more truncation functions to use folios (Matthew
   Wilcox)

 - Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
   Wilcox)

 - Convert rmap_walk to use folios (Matthew Wilcox)

 - Convert most of shrink_page_list() to use a folio (Matthew Wilcox)

 - Add support for creating large folios in readahead (Matthew Wilcox)

* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
  mm/damon: minor cleanup for damon_pa_young
  selftests/vm/transhuge-stress: Support file-backed PMD folios
  mm/filemap: Support VM_HUGEPAGE for file mappings
  mm/readahead: Switch to page_cache_ra_order
  mm/readahead: Align file mappings for non-DAX
  mm/readahead: Add large folio readahead
  mm: Support arbitrary THP sizes
  mm: Make large folios depend on THP
  mm: Fix READ_ONLY_THP warning
  mm/filemap: Allow large folios to be added to the page cache
  mm: Turn can_split_huge_page() into can_split_folio()
  mm/vmscan: Convert pageout() to take a folio
  mm/vmscan: Turn page_check_references() into folio_check_references()
  mm/vmscan: Account large folios correctly
  mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
  mm/vmscan: Free non-shmem folios without splitting them
  mm/rmap: Constify the rmap_walk_control argument
  mm/rmap: Convert rmap_walk() to take a folio
  mm: Turn page_anon_vma() into folio_anon_vma()
  mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
  ...