linux.git/drivers/nvme/host/core.c, branch v5.16

nvme: fix use after free when disconnecting a reconnecting ctrl

2021-12-07T17:21:16+00:00

A crash happens when trying to disconnect a reconnecting ctrl:

 1) The network was cut off when the connection was just established,
    scan work hang there waiting for some IOs complete.  Those I/Os were
    retried because we return BLK_STS_RESOURCE to blk in reconnecting.
 2) After a while, I tried to disconnect this connection.  This
    procedure also hangs because it tried to obtain ctrl->scan_lock.
    It should be noted that now we have switched the controller state
    to NVME_CTRL_DELETING.
 3) In nvme_check_ready(), we always return true when ctrl->state is
    NVME_CTRL_DELETING, so those retrying I/Os were issued to the bottom
    device which was already freed.

To fix this, when ctrl->state is NVME_CTRL_DELETING, issue cmd to bottom
device only when queue state is live.  If not, return host path error to
the block layer

Signed-off-by: Ruozhu Li 
Reviewed-by: Sagi Grimberg 
Signed-off-by: Christoph Hellwig

nvme: disable namespace access for unsupported metadata

2021-12-06T07:52:08+00:00

The only fabrics target that supports metadata handling through the
separate integrity buffer is RDMA. It is currently usable only if the
size is 8B per block and formatted for protection information. If an
rdma target were to export a namespace with a different format (ex:
4k+64B), the driver will not be able to submit valid read/write commands
for that namespace.

Suppress setting the metadata feature in the namespace so that the
gendisk capacity will be set to 0. This will prevent read/write access
through the block stack, but will continue to allow ioctl passthrough
commands.

Cc: Max Gurtovoy 
Cc: Sagi Grimberg 
Signed-off-by: Keith Busch 
Signed-off-by: Christoph Hellwig

nvme: show subsys nqn for duplicate cntlids

2021-12-06T07:52:08+00:00

The driver assigned nvme handle isn't persistent across reboots, so is
not enough information to match up where the collisions are occuring.
Add the subsys nqn string to the output so that it can more easily be
identified later.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215099
Signed-off-by: Keith Busch 
Signed-off-by: Christoph Hellwig

nvme: fix write zeroes pi

2021-11-23T16:22:41+00:00

Write Zeroes sets PRACT when block integrity is enabled (as it should),
but neglects to also set the reftag which is expected by reads. This
causes protection errors on reads.

Fix this by setting the reftag for type 1 and 2 (for type 3, reads will
not check the reftag).

Signed-off-by: Klaus Jensen 
Reviewed-by: Martin K. Petersen 
Signed-off-by: Christoph Hellwig

nvme-pci: add NO APST quirk for Kioxia device

2021-11-23T16:22:41+00:00

This particular Kioxia device times out and aborts I/O during any load,
but it's more easily observable with discards (fstrim).

The device gets to a state that is also not possible to use
"nvme set-feature" to disable APST.
Booting with nvme_core.default_ps_max_latency=0 solves the issue.

We had a dozen or so of these devices behaving this same way in
customer environments.

Signed-off-by: Enzo Matsumiya 
Signed-off-by: Christoph Hellwig

Merge tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-block

2021-11-09T19:20:07+00:00

Pull block fixes from Jens Axboe:

 - Set of fixes for the batched tag allocation (Ming, me)

 - add_disk() error handling fix (Luis)

 - Nested queue quiesce fixes (Ming)

 - Shared tags init error handling fix (Ye)

 - Misc cleanups (Jean, Ming, me)

* tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-block:
  nvme: wait until quiesce is done
  scsi: make sure that request queue queiesce and unquiesce balanced
  scsi: avoid to quiesce sdev->request_queue two times
  blk-mq: add one API for waiting until quiesce is done
  blk-mq: don't free tags if the tag_set is used by other device in queue initialztion
  block: fix device_add_disk() kobject_create_and_add() error handling
  block: ensure cached plug request matches the current queue
  block: move queue enter logic into blk_mq_submit_bio()
  block: make bio_queue_enter() fast-path available inline
  block: split request allocation components into helpers
  block: have plug stored requests hold references to the queue
  blk-mq: update hctx->nr_active in blk_mq_end_request_batch()
  blk-mq: add RQF_ELV debug entry
  blk-mq: only try to run plug merge if request has same queue with incoming bio
  block: move RQF_ELV setting into allocators
  dm: don't stop request queue after the dm device is suspended
  block: replace always false argument with 'false'
  block: assign correct tag before doing prefetch of request
  blk-mq: fix redundant check of !e expression

nvme: wait until quiesce is done

2021-11-09T15:14:27+00:00

NVMe uses one atomic flag to check if quiesce is needed. If quiesce is
started, the helper returns immediately. This way is wrong, since we
have to wait until quiesce is done.

Fixes: e70feb8b3e68 ("blk-mq: support concurrent queue quiesce/unquiesce")
Reviewed-by: Keith Busch 
Signed-off-by: Ming Lei 
Reviewed-by: Martin K. Petersen 
Link: https://lore.kernel.org/r/20211109071144.181581-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe

Merge tag 'for-5.16/drivers-2021-10-29' of git://git.kernel.dk/linux-block

2021-11-01T16:27:38+00:00

Pull block driver updates from Jens Axboe:

 - paride driver cleanups (Christoph)

 - Remove cryptoloop support (Christoph)

 - null_blk poll support (me)

 - Now that add_disk() supports proper error handling, add it to various
   drivers (Luis)

 - Make ataflop actually work again (Michael)

 - s390 dasd fixes (Stefan, Heiko)

 - nbd fixes (Yu, Ye)

 - Remove redundant wq flush in mtip32xx (Christophe)

 - NVMe updates
      - fix a multipath partition scanning deadlock (Hannes Reinecke)
      - generate uevent once a multipath namespace is operational again
        (Hannes Reinecke)
      - support unique discovery controller NQNs (Hannes Reinecke)
      - fix use-after-free when a port is removed (Israel Rukshin)
      - clear shadow doorbell memory on resets (Keith Busch)
      - use struct_size (Len Baker)
      - add error handling support for add_disk (Luis Chamberlain)
      - limit the maximal queue size for RDMA controllers (Max Gurtovoy)
      - use a few more symbolic names (Max Gurtovoy)
      - fix error code in nvme_rdma_setup_ctrl (Max Gurtovoy)
      - add support for ->map_queues on FC (Saurav Kashyap)
      - support the current discovery subsystem entry (Hannes Reinecke)
      - use flex_array_size and struct_size (Len Baker)

 - bcache fixes (Christoph, Coly, Chao, Lin, Qing)

 - MD updates (Christoph, Guoqing, Xiao)

 - Misc fixes (Dan, Ding, Jiapeng, Shin'ichiro, Ye)

* tag 'for-5.16/drivers-2021-10-29' of git://git.kernel.dk/linux-block: (117 commits)
  null_blk: Fix handling of submit_queues and poll_queues attributes
  block: ataflop: Fix warning comparing pointer to 0
  bcache: replace snprintf in show functions with sysfs_emit
  bcache: move uapi header bcache.h to bcache code directory
  nvmet: use flex_array_size and struct_size
  nvmet: register discovery subsystem as 'current'
  nvmet: switch check for subsystem type
  nvme: add new discovery log page entry definitions
  block: ataflop: more blk-mq refactoring fixes
  block: remove support for cryptoloop and the xor transfer
  mtd: add add_disk() error handling
  rnbd: add error handling support for add_disk()
  um/drivers/ubd_kern: add error handling support for add_disk()
  m68k/emu/nfblock: add error handling support for add_disk()
  xen-blkfront: add error handling support for add_disk()
  bcache: add error handling support for add_disk()
  dm: add add_disk() error handling
  block: aoe: fixup coccinelle warnings
  nvmet: use struct_size over open coded arithmetic
  nvme: drop scan_lock and always kick requeue list when removing namespaces
  ...

nvme: display correct subsystem NQN

2021-10-20T17:16:02+00:00

With discovery controllers supporting unique subsystem NQNs the
actual subsystem NQN might be different from that one passed in
via the connect args. So add a helper to display the resulting
subsystem NQN.

Signed-off-by: Hannes Reinecke 
Reviewed-by: Chaitanya Kulkarni 
Signed-off-by: Christoph Hellwig

nvme: Add connect option 'discovery'

2021-10-20T17:16:02+00:00

Add a connect option 'discovery' to specify that the connection
should be made to a discovery controller, not a normal I/O controller.
With discovery controllers supporting unique subsystem NQNs we
cannot easily distinguish by the subsystem NQN if this should be
a discovery connection, but we need this information to blank out
options not supported by discovery controllers.

Signed-off-by: Hannes Reinecke 
Reviewed-by: Chaitanya Kulkarni 
Signed-off-by: Christoph Hellwig