linux.git/drivers/net, branch v6.8-rc7

gtp: fix use-after-free and null-ptr-deref in gtp_newlink()

2024-02-29T13:14:18+00:00

The gtp_link_ops operations structure for the subsystem must be
registered after registering the gtp_net_ops pernet operations structure.

Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug:

[ 1010.702740] gtp: GTP module unloaded
[ 1010.715877] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
[ 1010.715888] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
[ 1010.715895] CPU: 1 PID: 128616 Comm: a.out Not tainted 6.8.0-rc6-std-def-alt1 #1
[ 1010.715899] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014
[ 1010.715908] RIP: 0010:gtp_newlink+0x4d7/0x9c0 [gtp]
[ 1010.715915] Code: 80 3c 02 00 0f 85 41 04 00 00 48 8b bb d8 05 00 00 e8 ed f6 ff ff 48 89 c2 48 89 c5 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4f 04 00 00 4c 89 e2 4c 8b 6d 00 48 b8 00 00 00
[ 1010.715920] RSP: 0018:ffff888020fbf180 EFLAGS: 00010203
[ 1010.715929] RAX: dffffc0000000000 RBX: ffff88800399c000 RCX: 0000000000000000
[ 1010.715933] RDX: 0000000000000001 RSI: ffffffff84805280 RDI: 0000000000000282
[ 1010.715938] RBP: 000000000000000d R08: 0000000000000001 R09: 0000000000000000
[ 1010.715942] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88800399cc80
[ 1010.715947] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000400
[ 1010.715953] FS:  00007fd1509ab5c0(0000) GS:ffff88805b300000(0000) knlGS:0000000000000000
[ 1010.715958] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1010.715962] CR2: 0000000000000000 CR3: 000000001c07a000 CR4: 0000000000750ee0
[ 1010.715968] PKRU: 55555554
[ 1010.715972] Call Trace:
[ 1010.715985]  ? __die_body.cold+0x1a/0x1f
[ 1010.715995]  ? die_addr+0x43/0x70
[ 1010.716002]  ? exc_general_protection+0x199/0x2f0
[ 1010.716016]  ? asm_exc_general_protection+0x1e/0x30
[ 1010.716026]  ? gtp_newlink+0x4d7/0x9c0 [gtp]
[ 1010.716034]  ? gtp_net_exit+0x150/0x150 [gtp]
[ 1010.716042]  __rtnl_newlink+0x1063/0x1700
[ 1010.716051]  ? rtnl_setlink+0x3c0/0x3c0
[ 1010.716063]  ? is_bpf_text_address+0xc0/0x1f0
[ 1010.716070]  ? kernel_text_address.part.0+0xbb/0xd0
[ 1010.716076]  ? __kernel_text_address+0x56/0xa0
[ 1010.716084]  ? unwind_get_return_address+0x5a/0xa0
[ 1010.716091]  ? create_prof_cpu_mask+0x30/0x30
[ 1010.716098]  ? arch_stack_walk+0x9e/0xf0
[ 1010.716106]  ? stack_trace_save+0x91/0xd0
[ 1010.716113]  ? stack_trace_consume_entry+0x170/0x170
[ 1010.716121]  ? __lock_acquire+0x15c5/0x5380
[ 1010.716139]  ? mark_held_locks+0x9e/0xe0
[ 1010.716148]  ? kmem_cache_alloc_trace+0x35f/0x3c0
[ 1010.716155]  ? __rtnl_newlink+0x1700/0x1700
[ 1010.716160]  rtnl_newlink+0x69/0xa0
[ 1010.716166]  rtnetlink_rcv_msg+0x43b/0xc50
[ 1010.716172]  ? rtnl_fdb_dump+0x9f0/0x9f0
[ 1010.716179]  ? lock_acquire+0x1fe/0x560
[ 1010.716188]  ? netlink_deliver_tap+0x12f/0xd50
[ 1010.716196]  netlink_rcv_skb+0x14d/0x440
[ 1010.716202]  ? rtnl_fdb_dump+0x9f0/0x9f0
[ 1010.716208]  ? netlink_ack+0xab0/0xab0
[ 1010.716213]  ? netlink_deliver_tap+0x202/0xd50
[ 1010.716220]  ? netlink_deliver_tap+0x218/0xd50
[ 1010.716226]  ? __virt_addr_valid+0x30b/0x590
[ 1010.716233]  netlink_unicast+0x54b/0x800
[ 1010.716240]  ? netlink_attachskb+0x870/0x870
[ 1010.716248]  ? __check_object_size+0x2de/0x3b0
[ 1010.716254]  netlink_sendmsg+0x938/0xe40
[ 1010.716261]  ? netlink_unicast+0x800/0x800
[ 1010.716269]  ? __import_iovec+0x292/0x510
[ 1010.716276]  ? netlink_unicast+0x800/0x800
[ 1010.716284]  __sock_sendmsg+0x159/0x190
[ 1010.716290]  ____sys_sendmsg+0x712/0x880
[ 1010.716297]  ? sock_write_iter+0x3d0/0x3d0
[ 1010.716304]  ? __ia32_sys_recvmmsg+0x270/0x270
[ 1010.716309]  ? lock_acquire+0x1fe/0x560
[ 1010.716315]  ? drain_array_locked+0x90/0x90
[ 1010.716324]  ___sys_sendmsg+0xf8/0x170
[ 1010.716331]  ? sendmsg_copy_msghdr+0x170/0x170
[ 1010.716337]  ? lockdep_init_map_type+0x2c7/0x860
[ 1010.716343]  ? lockdep_hardirqs_on_prepare+0x430/0x430
[ 1010.716350]  ? debug_mutex_init+0x33/0x70
[ 1010.716360]  ? percpu_counter_add_batch+0x8b/0x140
[ 1010.716367]  ? lock_acquire+0x1fe/0x560
[ 1010.716373]  ? find_held_lock+0x2c/0x110
[ 1010.716384]  ? __fd_install+0x1b6/0x6f0
[ 1010.716389]  ? lock_downgrade+0x810/0x810
[ 1010.716396]  ? __fget_light+0x222/0x290
[ 1010.716403]  __sys_sendmsg+0xea/0x1b0
[ 1010.716409]  ? __sys_sendmsg_sock+0x40/0x40
[ 1010.716419]  ? lockdep_hardirqs_on_prepare+0x2b3/0x430
[ 1010.716425]  ? syscall_enter_from_user_mode+0x1d/0x60
[ 1010.716432]  do_syscall_64+0x30/0x40
[ 1010.716438]  entry_SYSCALL_64_after_hwframe+0x62/0xc7
[ 1010.716444] RIP: 0033:0x7fd1508cbd49
[ 1010.716452] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ef 70 0d 00 f7 d8 64 89 01 48
[ 1010.716456] RSP: 002b:00007fff18872348 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[ 1010.716463] RAX: ffffffffffffffda RBX: 000055f72bf0eac0 RCX: 00007fd1508cbd49
[ 1010.716468] RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000006
[ 1010.716473] RBP: 00007fff18872360 R08: 00007fff18872360 R09: 00007fff18872360
[ 1010.716478] R10: 00007fff18872360 R11: 0000000000000202 R12: 000055f72bf0e1b0
[ 1010.716482] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 1010.716491] Modules linked in: gtp(+) udp_tunnel ib_core uinput af_packet rfkill qrtr joydev hid_generic usbhid hid kvm_intel iTCO_wdt intel_pmc_bxt iTCO_vendor_support kvm snd_hda_codec_generic ledtrig_audio irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel snd_hda_intel nls_utf8 snd_intel_dspcfg nls_cp866 psmouse aesni_intel vfat crypto_simd fat cryptd glue_helper snd_hda_codec pcspkr snd_hda_core i2c_i801 snd_hwdep i2c_smbus xhci_pci snd_pcm lpc_ich xhci_pci_renesas xhci_hcd qemu_fw_cfg tiny_power_button button sch_fq_codel vboxvideo drm_vram_helper drm_ttm_helper ttm vboxsf vboxguest snd_seq_midi snd_seq_midi_event snd_seq snd_rawmidi snd_seq_device snd_timer snd soundcore msr fuse efi_pstore dm_mod ip_tables x_tables autofs4 virtio_gpu virtio_dma_buf drm_kms_helper cec rc_core drm virtio_rng virtio_scsi rng_core virtio_balloon virtio_blk virtio_net virtio_console net_failover failover ahci libahci libata evdev scsi_mod input_leds serio_raw virtio_pci intel_agp
[ 1010.716674]  virtio_ring intel_gtt virtio [last unloaded: gtp]
[ 1010.716693] ---[ end trace 04990a4ce61e174b ]---

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Ofitserov 
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Reviewed-by: Jiri Pirko 
Link: https://lore.kernel.org/r/20240228114703.465107-1-oficerovas@altlinux.org
Signed-off-by: Paolo Abeni

igb: extend PTP timestamp adjustments to i211

2024-02-29T04:16:48+00:00

The i211 requires the same PTP timestamp adjustments as the i210,
according to its datasheet. To ensure consistent timestamping across
different platforms, this change extends the existing adjustments to
include the i211.

The adjustment result are tested and comparable for i210 and i211 based
systems.

Fixes: 3f544d2a4d5c ("igb: adjust PTP timestamps for Tx/Rx latency")
Signed-off-by: Oleksij Rempel 
Reviewed-by: Jacob Keller 
Tested-by: Pucha Himasekhar Reddy  (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen 
Link: https://lore.kernel.org/r/20240227184942.362710-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski

stmmac: Clear variable when destroying workqueue

2024-02-28T11:24:39+00:00

Currently when suspending driver and stopping workqueue it is checked whether
workqueue is not NULL and if so, it is destroyed.
Function destroy_workqueue() does drain queue and does clear variable, but
it does not set workqueue variable to NULL. This can cause kernel/module
panic if code attempts to clear workqueue that was not initialized.

This scenario is possible when resuming suspended driver in stmmac_resume(),
because there is no handling for failed stmmac_hw_setup(),
which can fail and return if DMA engine has failed to initialize,
and workqueue is initialized after DMA engine.
Should DMA engine fail to initialize, resume will proceed normally,
but interface won't work and TX queue will eventually timeout,
causing 'Reset adapter' error.
This then does destroy workqueue during reset process.
And since workqueue is initialized after DMA engine and can be skipped,
it will cause kernel/module panic.

To secure against this possible crash, set workqueue variable to NULL when
destroying workqueue.

Log/backtrace from crash goes as follows:
[88.031977]------------[ cut here ]------------
[88.031985]NETDEV WATCHDOG: eth0 (sxgmac): transmit queue 1 timed out
[88.032017]WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:477 dev_watchdog+0x390/0x398
           
[88.032251]---[ end trace e70de432e4d5c2c0 ]---
[88.032282]sxgmac 16d88000.ethernet eth0: Reset adapter.
[88.036359]------------[ cut here ]------------
[88.036519]Call trace:
[88.036523] flush_workqueue+0x3e4/0x430
[88.036528] drain_workqueue+0xc4/0x160
[88.036533] destroy_workqueue+0x40/0x270
[88.036537] stmmac_fpe_stop_wq+0x4c/0x70
[88.036541] stmmac_release+0x278/0x280
[88.036546] __dev_close_many+0xcc/0x158
[88.036551] dev_close_many+0xbc/0x190
[88.036555] dev_close.part.0+0x70/0xc0
[88.036560] dev_close+0x24/0x30
[88.036564] stmmac_service_task+0x110/0x140
[88.036569] process_one_work+0x1d8/0x4a0
[88.036573] worker_thread+0x54/0x408
[88.036578] kthread+0x164/0x170
[88.036583] ret_from_fork+0x10/0x20
[88.036588]---[ end trace e70de432e4d5c2c1 ]---
[88.036597]Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004

Fixes: 5a5586112b929 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: Jakub Raczynski 
Reviewed-by: Jiri Pirko 
Signed-off-by: David S. Miller

net: ethernet: adi: move PHYLIB from vendor to driver symbol

2024-02-28T11:16:34+00:00

In a previous patch I added "select PHYLIB" at the wrong place for the
ADIN1110 driver symbol, so move it to its correct place under the
ADIN1110 kconfig symbol.

Fixes: a9f80df4f514 ("net: ethernet: adi: requires PHYLIB support")
Signed-off-by: Randy Dunlap 
Reported-by: Michal Kubecek 
Closes: https://lore.kernel.org/lkml/77012b38-4b49-47f4-9a88-d773d52909ad@infradead.org/T/#m8ba397484738711edc0ad607b2c63ca02244e3c3
Cc: Lennart Franzen 
Cc: "David S. Miller" 
Cc: Eric Dumazet 
Cc: Jakub Kicinski 
Cc: Paolo Abeni 
Cc: netdev@vger.kernel.org
Cc: Nuno Sa 
Tested-by: Michal Kubecek 
Signed-off-by: David S. Miller

Merge tag 'wireless-2024-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless

2024-02-28T03:19:16+00:00

Kalle Valo says:

====================
wireless fixes for v6.8-rc7

Few remaining fixes, hopefully the last wireless pull request to v6.8.
Two fixes to the stack and two to iwlwifi but no high priority fixes
this time.

* tag 'wireless-2024-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: mac80211: only call drv_sta_rc_update for uploaded stations
  MAINTAINERS: wifi: Add N: ath1*k entries to match .yaml files
  MAINTAINERS: wifi: update Jeff Johnson e-mail address
  wifi: iwlwifi: mvm: fix the TXF mapping for BZ devices
  wifi: iwlwifi: mvm: ensure offloading TID queue exists
  wifi: nl80211: reject iftype change with mesh ID change
====================

Link: https://lore.kernel.org/r/20240227135751.C5EC6C43390@smtp.kernel.org
Signed-off-by: Jakub Kicinski

net: lan78xx: fix "softirq work is pending" error

2024-02-28T02:21:51+00:00

Disable BH around the call to napi_schedule() to avoid following
error:
NOHZ tick-stop error: local softirq work is pending, handler #08!!!

Fixes: ec4c7e12396b ("lan78xx: Introduce NAPI polling support")
Signed-off-by: Oleksij Rempel 
Link: https://lore.kernel.org/r/20240226110820.2113584-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski

net: stmmac: Complete meta data only when enabled

2024-02-28T02:17:47+00:00

Currently using plain XDP/ZC sockets on stmmac results in a kernel crash:

|[  255.822584] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
|[...]
|[  255.822764] Call trace:
|[  255.822766]  stmmac_tx_clean.constprop.0+0x848/0xc38

The program counter indicates xsk_tx_metadata_complete(). It works on
compl->tx_timestamp, which is not set by xsk_tx_metadata_to_compl() due to
missing meta data. Therefore, call xsk_tx_metadata_complete() only when
meta data is actually used.

Tested on imx93 without XDP, with XDP and with XDP/ZC.

Fixes: 1347b419318d ("net: stmmac: Add Tx HWTS support to XDP ZC")
Suggested-by: Serge Semin 
Tested-by: Serge Semin 
Link: https://lore.kernel.org/netdev/87r0h7wg8u.fsf@kurt.kurt.home/
Acked-by: Stanislav Fomichev 
Signed-off-by: Kurt Kanzenbach 
Link: https://lore.kernel.org/r/20240222-stmmac_xdp-v2-1-4beee3a037e4@linutronix.de
Signed-off-by: Jakub Kicinski

net: usb: dm9601: fix wrong return value in dm9601_mdio_read

2024-02-28T02:17:23+00:00

The MII code does not check the return value of mdio_read (among
others), and therefore no error code should be sent. A previous fix to
the use of an uninitialized variable propagates negative error codes,
that might lead to wrong operations by the MII library.

An example of such issues is the use of mii_nway_restart by the dm9601
driver. The mii_nway_restart function does not check the value returned
by mdio_read, which in this case might be a negative number which could
contain the exact bit the function checks (BMCR_ANENABLE = 0x1000).

Return zero in case of error, as it is common practice in users of
mdio_read to avoid wrong uses of the return value.

Fixes: 8f8abb863fa5 ("net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read")
Signed-off-by: Javier Carrasco 
Reviewed-by: Simon Horman 
Reviewed-by: Peter Korsgaard 
Link: https://lore.kernel.org/r/20240225-dm9601_ret_err-v1-1-02c1d959ea59@gmail.com
Signed-off-by: Jakub Kicinski

veth: try harder when allocating queue memory

2024-02-27T12:56:54+00:00

struct veth_rq is pretty large, 832B total without debug
options enabled. Since commit under Fixes we try to pre-allocate
enough queues for every possible CPU. Miao Wang reports that
this may lead to order-5 allocations which will fail in production.

Let the allocation fallback to vmalloc() and try harder.
These are the same flags we pass to netdev queue allocation.

Reported-and-tested-by: Miao Wang 
Fixes: 9d3684c24a52 ("veth: create by default nr_possible_cpus queues")
Link: https://lore.kernel.org/all/5F52CAE2-2FB7-4712-95F1-3312FBBFA8DD@gmail.com/
Signed-off-by: Jakub Kicinski 
Reviewed-by: Eric Dumazet 
Link: https://lore.kernel.org/r/20240223235908.693010-1-kuba@kernel.org
Signed-off-by: Paolo Abeni

ionic: restore netdev feature bits after reset

2024-02-27T12:03:32+00:00

When rebuilding the lif after an FLR, be sure to restore the
current netdev features, not do the usual first time feature
init.  This prevents losing user changes to things like TSO
or vlan tagging states.

Fixes: 45b84188a0a4 ("ionic: keep filters across FLR")
Reviewed-by: Brett Creeley 
Signed-off-by: Shannon Nelson 
Signed-off-by: Paolo Abeni