linux.git/drivers/net, branch v6.11-rc2 Linux kernel source tree Merge tag 'net-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2024-08-01T16:42:09+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-08-01T16:42:09+00:00 183d46ff422ef9f3d755b6808ef3faa6d009ba3a Pull networking fixes from Paolo Abeni: "Including fixes from wireless, bleutooth, BPF and netfilter. Current release - regressions: - core: drop bad gso csum_start and offset in virtio_net_hdr - wifi: mt76: fix null pointer access in mt792x_mac_link_bss_remove - eth: tun: add missing bpf_net_ctx_clear() in do_xdp_generic() - phy: aquantia: only poll GLOBAL_CFG regs on aqr113, aqr113c and aqr115c Current release - new code bugs: - smc: prevent UAF in inet_create() - bluetooth: btmtk: fix kernel crash when entering btmtk_usb_suspend - eth: bnxt: reject unsupported hash functions Previous releases - regressions: - sched: act_ct: take care of padding in struct zones_ht_key - netfilter: fix null-ptr-deref in iptable_nat_table_init(). - tcp: adjust clamping window for applications specifying SO_RCVBUF Previous releases - always broken: - ethtool: rss: small fixes to spec and GET - mptcp: - fix signal endpoint re-add - pm: fix backup support in signal endpoints - wifi: ath12k: fix soft lockup on suspend - eth: bnxt_en: fix RSS logic in __bnxt_reserve_rings() - eth: ice: fix AF_XDP ZC timeout and concurrency issues - eth: mlx5: - fix missing lock on sync reset reload - fix error handling in irq_pool_request_irq" * tag 'net-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits) mptcp: fix duplicate data handling mptcp: fix bad RCVPRUNED mib accounting ipv6: fix ndisc_is_useropt() handling for PIO igc: Fix double reset adapter triggered from a single taprio cmd net: MAINTAINERS: Demote Qualcomm IPA to "maintained" net: wan: fsl_qmc_hdlc: Discard received CRC net: wan: fsl_qmc_hdlc: Convert carrier_lock spinlock to a mutex net/mlx5e: Add a check for the return value from mlx5_port_set_eth_ptys net/mlx5e: Fix CT entry update leaks of modify header context net/mlx5e: Require mlx5 tc classifier action support for IPsec prio capability net/mlx5: Fix missing lock on sync reset reload net/mlx5: Lag, don't use the hardcoded value of the first port net/mlx5: DR, Fix 'stack guard page was hit' error in dr_rule net/mlx5: Fix error handling in irq_pool_request_irq net/mlx5: Always drain health in shutdown callback net: Add skbuff.h to MAINTAINERS r8169: don't increment tx_dropped in case of NETDEV_TX_BUSY netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init(). netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init(). net: drop bad gso csum_start and offset in virtio_net_hdr ... 
Pull networking fixes from Paolo Abeni:
 "Including fixes from wireless, bleutooth, BPF and netfilter.

  Current release - regressions:

   - core: drop bad gso csum_start and offset in virtio_net_hdr

   - wifi: mt76: fix null pointer access in mt792x_mac_link_bss_remove

   - eth: tun: add missing bpf_net_ctx_clear() in do_xdp_generic()

   - phy: aquantia: only poll GLOBAL_CFG regs on aqr113, aqr113c and
     aqr115c

  Current release - new code bugs:

   - smc: prevent UAF in inet_create()

   - bluetooth: btmtk: fix kernel crash when entering btmtk_usb_suspend

   - eth: bnxt: reject unsupported hash functions

  Previous releases - regressions:

   - sched: act_ct: take care of padding in struct zones_ht_key

   - netfilter: fix null-ptr-deref in iptable_nat_table_init().

   - tcp: adjust clamping window for applications specifying SO_RCVBUF

  Previous releases - always broken:

   - ethtool: rss: small fixes to spec and GET

   - mptcp:
      - fix signal endpoint re-add
      - pm: fix backup support in signal endpoints

   - wifi: ath12k: fix soft lockup on suspend

   - eth: bnxt_en: fix RSS logic in __bnxt_reserve_rings()

   - eth: ice: fix AF_XDP ZC timeout and concurrency issues

   - eth: mlx5:
      - fix missing lock on sync reset reload
      - fix error handling in irq_pool_request_irq"

* tag 'net-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
  mptcp: fix duplicate data handling
  mptcp: fix bad RCVPRUNED mib accounting
  ipv6: fix ndisc_is_useropt() handling for PIO
  igc: Fix double reset adapter triggered from a single taprio cmd
  net: MAINTAINERS: Demote Qualcomm IPA to "maintained"
  net: wan: fsl_qmc_hdlc: Discard received CRC
  net: wan: fsl_qmc_hdlc: Convert carrier_lock spinlock to a mutex
  net/mlx5e: Add a check for the return value from mlx5_port_set_eth_ptys
  net/mlx5e: Fix CT entry update leaks of modify header context
  net/mlx5e: Require mlx5 tc classifier action support for IPsec prio capability
  net/mlx5: Fix missing lock on sync reset reload
  net/mlx5: Lag, don't use the hardcoded value of the first port
  net/mlx5: DR, Fix 'stack guard page was hit' error in dr_rule
  net/mlx5: Fix error handling in irq_pool_request_irq
  net/mlx5: Always drain health in shutdown callback
  net: Add skbuff.h to MAINTAINERS
  r8169: don't increment tx_dropped in case of NETDEV_TX_BUSY
  netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init().
  netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init().
  net: drop bad gso csum_start and offset in virtio_net_hdr
  ...
igc: Fix double reset adapter triggered from a single taprio cmd 2024-08-01T01:56:23+00:00 Faizal Rahim faizal.abdul.rahim@linux.intel.com 2024-07-30T17:33:02+00:00 b9e7fc0aeda79031a101610b2fcb12bf031056e9 Following the implementation of "igc: Add TransmissionOverrun counter" patch, when a taprio command is triggered by user, igc processes two commands: TAPRIO_CMD_REPLACE followed by TAPRIO_CMD_STATS. However, both commands unconditionally pass through igc_tsn_offload_apply() which evaluates and triggers reset adapter. The double reset causes issues in the calculation of adapter->qbv_count in igc. TAPRIO_CMD_REPLACE command is expected to reset the adapter since it activates qbv. It's unexpected for TAPRIO_CMD_STATS to do the same because it doesn't configure any driver-specific TSN settings. So, the evaluation in igc_tsn_offload_apply() isn't needed for TAPRIO_CMD_STATS. To address this, commands parsing are relocated to igc_tsn_enable_qbv_scheduling(). Commands that don't require an adapter reset will exit after processing, thus avoiding igc_tsn_offload_apply(). Fixes: d3750076d464 ("igc: Add TransmissionOverrun counter") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240730173304.865479-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Following the implementation of "igc: Add TransmissionOverrun counter"
patch, when a taprio command is triggered by user, igc processes two
commands: TAPRIO_CMD_REPLACE followed by TAPRIO_CMD_STATS. However, both
commands unconditionally pass through igc_tsn_offload_apply() which
evaluates and triggers reset adapter. The double reset causes issues in
the calculation of adapter->qbv_count in igc.

TAPRIO_CMD_REPLACE command is expected to reset the adapter since it
activates qbv. It's unexpected for TAPRIO_CMD_STATS to do the same
because it doesn't configure any driver-specific TSN settings. So, the
evaluation in igc_tsn_offload_apply() isn't needed for TAPRIO_CMD_STATS.

To address this, commands parsing are relocated to
igc_tsn_enable_qbv_scheduling(). Commands that don't require an adapter
reset will exit after processing, thus avoiding igc_tsn_offload_apply().

Fixes: d3750076d464 ("igc: Add TransmissionOverrun counter")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240730173304.865479-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: wan: fsl_qmc_hdlc: Discard received CRC 2024-08-01T01:09:08+00:00 Herve Codina herve.codina@bootlin.com 2024-07-30T06:31:33+00:00 e549360069b4a57e111b8222fc072f3c7c1688ab Received frame from QMC contains the CRC. Upper layers don't need this CRC and tcpdump mentioned trailing junk data due to this CRC presence. As some other HDLC driver, simply discard this CRC. Fixes: d0f2258e79fd ("net: wan: Add support for QMC HDLC") Cc: stable@vger.kernel.org Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240730063133.179598-1-herve.codina@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Received frame from QMC contains the CRC.
Upper layers don't need this CRC and tcpdump mentioned trailing junk
data due to this CRC presence.

As some other HDLC driver, simply discard this CRC.

Fixes: d0f2258e79fd ("net: wan: Add support for QMC HDLC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240730063133.179598-1-herve.codina@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: wan: fsl_qmc_hdlc: Convert carrier_lock spinlock to a mutex 2024-08-01T01:06:24+00:00 Herve Codina herve.codina@bootlin.com 2024-07-30T06:31:04+00:00 c4d6a347ba7babdf9d90a0eb24048c266cae0532 The carrier_lock spinlock protects the carrier detection. While it is held, framer_get_status() is called which in turn takes a mutex. This is not correct and can lead to a deadlock. A run with PROVE_LOCKING enabled detected the issue: [ BUG: Invalid wait context ] ... c204ddbc (&framer->mutex){+.+.}-{3:3}, at: framer_get_status+0x40/0x78 other info that might help us debug this: context-{4:4} 2 locks held by ifconfig/146: #0: c0926a38 (rtnl_mutex){+.+.}-{3:3}, at: devinet_ioctl+0x12c/0x664 #1: c2006a40 (&qmc_hdlc->carrier_lock){....}-{2:2}, at: qmc_hdlc_framer_set_carrier+0x30/0x98 Avoid the spinlock usage and convert carrier_lock to a mutex. Fixes: 54762918ca85 ("net: wan: fsl_qmc_hdlc: Add framer support") Cc: stable@vger.kernel.org Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240730063104.179553-1-herve.codina@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
The carrier_lock spinlock protects the carrier detection. While it is
held, framer_get_status() is called which in turn takes a mutex.
This is not correct and can lead to a deadlock.

A run with PROVE_LOCKING enabled detected the issue:
  [ BUG: Invalid wait context ]
  ...
  c204ddbc (&framer->mutex){+.+.}-{3:3}, at: framer_get_status+0x40/0x78
  other info that might help us debug this:
  context-{4:4}
  2 locks held by ifconfig/146:
  #0: c0926a38 (rtnl_mutex){+.+.}-{3:3}, at: devinet_ioctl+0x12c/0x664
  #1: c2006a40 (&qmc_hdlc->carrier_lock){....}-{2:2}, at: qmc_hdlc_framer_set_carrier+0x30/0x98

Avoid the spinlock usage and convert carrier_lock to a mutex.

Fixes: 54762918ca85 ("net: wan: fsl_qmc_hdlc: Add framer support")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240730063104.179553-1-herve.codina@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/mlx5e: Add a check for the return value from mlx5_port_set_eth_ptys 2024-08-01T01:04:51+00:00 Shahar Shitrit shshitrit@nvidia.com 2024-07-30T06:16:37+00:00 3f8e82a020a5c22f9b791f4ac499b8e18007fbda Since the documentation for mlx5_toggle_port_link states that it should only be used after setting the port register, we add a check for the return value from mlx5_port_set_eth_ptys to ensure the register was successfully set before calling it. Fixes: 667daedaecd1 ("net/mlx5e: Toggle link only after modifying port parameters") Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://patch.msgid.link/20240730061638.1831002-9-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Since the documentation for mlx5_toggle_port_link states that it should
only be used after setting the port register, we add a check for the
return value from mlx5_port_set_eth_ptys to ensure the register was
successfully set before calling it.

Fixes: 667daedaecd1 ("net/mlx5e: Toggle link only after modifying port parameters")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/mlx5e: Fix CT entry update leaks of modify header context 2024-08-01T01:04:51+00:00 Chris Mi cmi@nvidia.com 2024-07-30T06:16:36+00:00 025f2b85a5e5a46df14ecf162c3c80a957a36d0b The cited commit allocates a new modify header to replace the old one when updating CT entry. But if failed to allocate a new one, eg. exceed the max number firmware can support, modify header will be an error pointer that will trigger a panic when deallocating it. And the old modify header point is copied to old attr. When the old attr is freed, the old modify header is lost. Fix it by restoring the old attr to attr when failed to allocate a new modify header context. So when the CT entry is freed, the right modify header context will be freed. And the panic of accessing error pointer is also fixed. Fixes: 94ceffb48eac ("net/mlx5e: Implement CT entry update") Signed-off-by: Chris Mi <cmi@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://patch.msgid.link/20240730061638.1831002-8-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
The cited commit allocates a new modify header to replace the old
one when updating CT entry. But if failed to allocate a new one, eg.
exceed the max number firmware can support, modify header will be
an error pointer that will trigger a panic when deallocating it. And
the old modify header point is copied to old attr. When the old
attr is freed, the old modify header is lost.

Fix it by restoring the old attr to attr when failed to allocate a
new modify header context. So when the CT entry is freed, the right
modify header context will be freed. And the panic of accessing
error pointer is also fixed.

Fixes: 94ceffb48eac ("net/mlx5e: Implement CT entry update")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/mlx5e: Require mlx5 tc classifier action support for IPsec prio capability 2024-08-01T01:04:51+00:00 Rahul Rameshbabu rrameshbabu@nvidia.com 2024-07-30T06:16:35+00:00 06827e27fdcd197557be72b2229dbd362303794f Require mlx5 classifier action support when creating IPSec chains in offload path. MLX5_IPSEC_CAP_PRIO should only be set if CONFIG_MLX5_CLS_ACT is enabled. If CONFIG_MLX5_CLS_ACT=n and MLX5_IPSEC_CAP_PRIO is set, configuring IPsec offload will fail due to the mlxx5 ipsec chain rules failing to be created due to lack of classifier action support. Fixes: fa5aa2f89073 ("net/mlx5e: Use chains for IPsec policy priority offload") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://patch.msgid.link/20240730061638.1831002-7-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Require mlx5 classifier action support when creating IPSec chains in
offload path. MLX5_IPSEC_CAP_PRIO should only be set if CONFIG_MLX5_CLS_ACT
is enabled. If CONFIG_MLX5_CLS_ACT=n and MLX5_IPSEC_CAP_PRIO is set,
configuring IPsec offload will fail due to the mlxx5 ipsec chain rules
failing to be created due to lack of classifier action support.

Fixes: fa5aa2f89073 ("net/mlx5e: Use chains for IPsec policy priority offload")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/mlx5: Fix missing lock on sync reset reload 2024-08-01T01:04:51+00:00 Moshe Shemesh moshe@nvidia.com 2024-07-30T06:16:34+00:00 572f9caa9e7295f8c8822e4122c7ae8f1c412ff9 On sync reset reload work, when remote host updates devlink on reload actions performed on that host, it misses taking devlink lock before calling devlink_remote_reload_actions_performed() which results in triggering lock assert like the following: WARNING: CPU: 4 PID: 1164 at net/devlink/core.c:261 devl_assert_locked+0x3e/0x50 … CPU: 4 PID: 1164 Comm: kworker/u96:6 Tainted: G S W 6.10.0-rc2+ #116 Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0 12/18/2015 Workqueue: mlx5_fw_reset_events mlx5_sync_reset_reload_work [mlx5_core] RIP: 0010:devl_assert_locked+0x3e/0x50 … Call Trace: <TASK> ? __warn+0xa4/0x210 ? devl_assert_locked+0x3e/0x50 ? report_bug+0x160/0x280 ? handle_bug+0x3f/0x80 ? exc_invalid_op+0x17/0x40 ? asm_exc_invalid_op+0x1a/0x20 ? devl_assert_locked+0x3e/0x50 devlink_notify+0x88/0x2b0 ? mlx5_attach_device+0x20c/0x230 [mlx5_core] ? __pfx_devlink_notify+0x10/0x10 ? process_one_work+0x4b6/0xbb0 process_one_work+0x4b6/0xbb0 […] Fixes: 84a433a40d0e ("net/mlx5: Lock mlx5 devlink reload callbacks") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://patch.msgid.link/20240730061638.1831002-6-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
On sync reset reload work, when remote host updates devlink on reload
actions performed on that host, it misses taking devlink lock before
calling devlink_remote_reload_actions_performed() which results in
triggering lock assert like the following:

WARNING: CPU: 4 PID: 1164 at net/devlink/core.c:261 devl_assert_locked+0x3e/0x50
…
 CPU: 4 PID: 1164 Comm: kworker/u96:6 Tainted: G S      W          6.10.0-rc2+ #116
 Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0 12/18/2015
 Workqueue: mlx5_fw_reset_events mlx5_sync_reset_reload_work [mlx5_core]
 RIP: 0010:devl_assert_locked+0x3e/0x50
…
 Call Trace:
  <TASK>
  ? __warn+0xa4/0x210
  ? devl_assert_locked+0x3e/0x50
  ? report_bug+0x160/0x280
  ? handle_bug+0x3f/0x80
  ? exc_invalid_op+0x17/0x40
  ? asm_exc_invalid_op+0x1a/0x20
  ? devl_assert_locked+0x3e/0x50
  devlink_notify+0x88/0x2b0
  ? mlx5_attach_device+0x20c/0x230 [mlx5_core]
  ? __pfx_devlink_notify+0x10/0x10
  ? process_one_work+0x4b6/0xbb0
  process_one_work+0x4b6/0xbb0
[…]

Fixes: 84a433a40d0e ("net/mlx5: Lock mlx5 devlink reload callbacks")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/mlx5: Lag, don't use the hardcoded value of the first port 2024-08-01T01:04:51+00:00 Mark Bloch mbloch@nvidia.com 2024-07-30T06:16:33+00:00 3fda84dc090390573cfbd0b1d70372663315de21 The cited commit didn't change the body of the loop as it should. It shouldn't be using MLX5_LAG_P1. Fixes: 7e978e7714d6 ("net/mlx5: Lag, use actual number of lag ports") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://patch.msgid.link/20240730061638.1831002-5-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
The cited commit didn't change the body of the loop as it should.
It shouldn't be using MLX5_LAG_P1.

Fixes: 7e978e7714d6 ("net/mlx5: Lag, use actual number of lag ports")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/mlx5: DR, Fix 'stack guard page was hit' error in dr_rule 2024-08-01T01:04:51+00:00 Yevgeny Kliteynik kliteyn@nvidia.com 2024-07-30T06:16:32+00:00 94a3ad6c081381fa9ee523781789802b4ed00faf This patch reduces the size of hw_ste_arr_optimized array that is allocated on stack from 640 bytes (5 match STEs + 5 action STES) to 448 bytes (2 match STEs + 5 action STES). This fixes the 'stack guard page was hit' issue, while still fitting majority of the usecases (up to 2 match STEs). Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://patch.msgid.link/20240730061638.1831002-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
This patch reduces the size of hw_ste_arr_optimized array that is
allocated on stack from 640 bytes (5 match STEs + 5 action STES)
to 448 bytes (2 match STEs + 5 action STES).
This fixes the 'stack guard page was hit' issue, while still fitting
majority of the usecases (up to 2 match STEs).

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>