linux.git/drivers/net, branch v4.8-rc7 Linux kernel source tree net/mlx4_en: Fix panic on xmit while port is down 2016-09-12T02:40:26+00:00 Moshe Shemesh moshe@mellanox.com 2016-09-11T07:56:20+00:00 7a61fc86af4a0c957c5b8c5777ab21d5cc286748 When port is down, tx drop counter update is not needed. Updating the counter in this case can cause a kernel panic as when the port is down, ring can be NULL. Fixes: 63a664b7e92b ("net/mlx4_en: fix tx_dropped bug") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
When port is down, tx drop counter update is not needed.
Updating the counter in this case can cause a kernel
panic as when the port is down, ring can be NULL.

Fixes: 63a664b7e92b ("net/mlx4_en: fix tx_dropped bug")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx4_en: Fixes for DCBX 2016-09-12T02:40:26+00:00 Tariq Toukan tariqt@mellanox.com 2016-09-11T07:56:19+00:00 564ed9b187082da79726a2f25bb88a58ebeec7e8 This patch adds a capability check before enabling DCBX. In addition, it re-organizes the relevant data structures, and fixes a typo in a define. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
This patch adds a capability check before enabling DCBX.
In addition, it re-organizes the relevant data structures,
and fixes a typo in a define.

Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_state() 2016-09-12T02:40:25+00:00 Kamal Heib kamalh@mellanox.com 2016-09-11T07:56:18+00:00 c677071741343381f4f555867c04af7ec4a90869 mlx4_en_dcbnl_set_state() returns u8, the return value from mlx4_en_setup_tc() could be negative in case of failure, so fix that. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
mlx4_en_dcbnl_set_state() returns u8, the return value from
mlx4_en_setup_tc() could be negative in case of failure, so fix that.

Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands")
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_all() 2016-09-12T02:40:25+00:00 Kamal Heib kamalh@mellanox.com 2016-09-11T07:56:17+00:00 74a9e9054456658f047bf71d9108844defde793d mlx4_en_dcbnl_set_all() returns u8, so return value can't be negative in case of failure. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Rana Shahout <ranas@mellanox.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
mlx4_en_dcbnl_set_all() returns u8, so return value can't be negative in
case of failure.

Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands")
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Rana Shahout <ranas@mellanox.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: ethernet: renesas: sh_eth: add POST registers for rz 2016-09-11T04:09:10+00:00 Chris Brandt chris.brandt@renesas.com 2016-09-07T18:57:09+00:00 e1487888eccc83e9eb5a3659955f79b039dc7945 Due to a mistake in the hardware manual, the FWSLC and POST1-4 registers were not documented and left out of the driver for RZ/A making the CAM feature non-operational. Additionally, when the offset values for POST1-4 are left blank, the driver attempts to set them using an offset of 0xFFFF which can cause a memory corruption or panic. This patch fixes the panic and properly enables CAM. Reported-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Due to a mistake in the hardware manual, the FWSLC and POST1-4 registers
were not documented and left out of the driver for RZ/A making the CAM
feature non-operational.
Additionally, when the offset values for POST1-4 are left blank, the driver
attempts to set them using an offset of 0xFFFF which can cause a memory
corruption or panic.

This patch fixes the panic and properly enables CAM.

Reported-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers: net: phy: mdio-xgene: Add hardware dependency 2016-09-10T02:29:40+00:00 Jean Delvare jdelvare@suse.de 2016-09-08T14:25:15+00:00 c2f57fb97da5730509a50e316f353d3da17f6c25 The mdio-xgene driver is only useful on X-Gene SoC. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Iyappan Subramanian <isubramanian@apm.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The mdio-xgene driver is only useful on X-Gene SoC.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Iyappan Subramanian <isubramanian@apm.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by:  Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'wireless-drivers-for-davem-2016-09-08' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers 2016-09-10T02:21:07+00:00 David S. Miller davem@davemloft.net 2016-09-10T02:21:07+00:00 0808a29a20322873fbfd3f7b4093ae92d0018e65 Kalle Valo says: ==================== wireless-drivers fixes for 4.8 iwlwifi * fix P2P dump trigger * prevent a potential null dereference in iwlmvm * prevent an uninitialized value from being returned in iwlmvm * advertise support for channel width change in AP mode ath10k * fix racy rx status retrieval from htt context * QCA9887 support is not experimental anymore, remove the warning message ath9k * fix regression with led GPIOs * fix AR5416 GPIO access warning brcmfmac * avoid potential stack overflow in brcmf_cfg80211_start_ap() ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 
Kalle Valo says:

====================
wireless-drivers fixes for 4.8

iwlwifi

* fix P2P dump trigger
* prevent a potential null dereference in iwlmvm
* prevent an uninitialized value from being returned in iwlmvm
* advertise support for channel width change in AP mode

ath10k

* fix racy rx status retrieval from htt context
* QCA9887 support is not experimental anymore, remove the warning message

ath9k

* fix regression with led GPIOs
* fix AR5416 GPIO access warning

brcmfmac

* avoid potential stack overflow in brcmf_cfg80211_start_ap()
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
dwc_eth_qos: do not register semi-initialized device 2016-09-10T02:20:21+00:00 Lars Persson lars.persson@axis.com 2016-09-08T11:24:21+00:00 47b02f7294a483387772a46931da942b2ca9d845 We move register_netdev() to the end of dwceqos_probe() to close any races where the netdev callbacks are called before the initialization has finished. Reported-by: Pavel Andrianov <andrianov@ispras.ru> Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
We move register_netdev() to the end of dwceqos_probe() to close any
races where the netdev callbacks are called before the initialization
has finished.

Reported-by: Pavel Andrianov <andrianov@ispras.ru>
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw: spectrum: Set port type before setting its address 2016-09-09T23:56:53+00:00 Ido Schimmel idosch@mellanox.com 2016-09-08T06:16:02+00:00 3247ff2b318f3eeaaf32163ce39ddaac23e9a6f9 During port init, we currently set the port's type to Ethernet after setting its MAC address. However, the hardware documentation states this should be the other way around. Align the driver with the hardware documentation and set the port's MAC address after setting its type. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
During port init, we currently set the port's type to Ethernet after
setting its MAC address. However, the hardware documentation states this
should be the other way around.

Align the driver with the hardware documentation and set the port's MAC
address after setting its type.

Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw: spectrum_router: Fix error path in mlxsw_sp_router_init 2016-09-09T23:56:53+00:00 Jiri Pirko jiri@mellanox.com 2016-09-08T06:16:01+00:00 40d259045500c6431633f215516c1f94bac8c62f When neigh_init fails, we have to do proper cleanup including router_fini call. Fixes: 6cf3c971dc84cb ("mlxsw: spectrum_router: Add private neigh table") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
When neigh_init fails, we have to do proper cleanup including
router_fini call.

Fixes: 6cf3c971dc84cb ("mlxsw: spectrum_router: Add private neigh table")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>