Pull rdma fixes from Doug Ledford:
 "Most are minor to important fixes.

  There is one performance enhancement that I took on the grounds that
  failing to check if other processes can run before running what's
  intended to be a background, idle-time task is a bug, even though the
  primary effect of the fix is to improve performance (and it was a very
  simple patch)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/mlx5: Postpone remove_keys under knowledge of coming preemption
  IB/mlx4: Use vmalloc for WR buffers when needed
  IB/mlx4: Use correct order of variables in log message
  iser-target: Remove explicit mlx4 work-around
  mlx4: Expose correct max_sge_rd limit
  IB/mad: Require CM send method for everything except ClassPortInfo
  IB/cma: Add a missing rcu_read_unlock()
  IB core: Fix ib_sg_to_pages()
  IB/srp: Fix srp_map_sg_fr()
  IB/srp: Fix indirect data buffer rkey endianness
  IB/srp: Initialize dma_length in srp_map_idb
  IB/srp: Fix possible send queue overflow
  IB/srp: Fix a memory leak
  IB/sa: Put netlink request into the request list before sending
  IB/iser: use sector_div instead of do_div
  IB/core: use RCU for uverbs id lookup
  IB/qib: Minor fixes to qib per SFF 8636
  IB/core: Fix user mode post wr corruption
  IB/qib: Fix qib_mr structure

There is a mis-order in mlx4 log. Fix it.

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Once virtio starts using the DMA API, we won't be able to safely DMA
from the stack.  virtio-net does a couple of config DMA requests
from small stack buffers -- switch to using dynamically-allocated
memory.

This should have no effect on any performance-critical code paths.

Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Andy Lutomirski <luto@kernel.org>

Pull networking fixes from David Miller:
 "A lot of Thanksgiving turkey leftovers accumulated, here goes:

   1) Fix bluetooth l2cap_chan object leak, from Johan Hedberg.

   2) IDs for some new iwlwifi chips, from Oren Givon.

   3) Fix rtlwifi lockups on boot, from Larry Finger.

   4) Fix memory leak in fm10k, from Stephen Hemminger.

   5) We have a route leak in the ipv6 tunnel infrastructure, fix from
      Paolo Abeni.

   6) Fix buffer pointer handling in arm64 bpf JIT,f rom Zi Shen Lim.

   7) Wrong lockdep annotations in tcp md5 support, fix from Eric
      Dumazet.

   8) Work around some middle boxes which prevent proper handling of TCP
      Fast Open, from Yuchung Cheng.

   9) TCP repair can do huge kmalloc() requests, build paged SKBs
      instead.  From Eric Dumazet.

  10) Fix msg_controllen overflow in scm_detach_fds, from Daniel
      Borkmann.

  11) Fix device leaks on ipmr table destruction in ipv4 and ipv6, from
      Nikolay Aleksandrov.

  12) Fix use after free in epoll with AF_UNIX sockets, from Rainer
      Weikusat.

  13) Fix double free in VRF code, from Nikolay Aleksandrov.

  14) Fix skb leaks on socket receive queue in tipc, from Ying Xue.

  15) Fix ifup/ifdown crach in xgene driver, from Iyappan Subramanian.

  16) Fix clearing of persistent array maps in bpf, from Daniel
      Borkmann.

  17) In TCP, for the cross-SYN case, we don't initialize tp->copied_seq
      early enough.  From Eric Dumazet.

  18) Fix out of bounds accesses in bpf array implementation when
      updating elements, from Daniel Borkmann.

  19) Fill gaps in RCU protection of np->opt in ipv6 stack, from Eric
      Dumazet.

  20) When dumping proxy neigh entries, we have to accomodate NULL
      device pointers properly, from Konstantin Khlebnikov.

  21) SCTP doesn't release all ipv6 socket resources properly, fix from
      Eric Dumazet.

  22) Prevent underflows of sch->q.qlen for multiqueue packet
      schedulers, also from Eric Dumazet.

  23) Fix MAC and unicast list handling in bnxt_en driver, from Jeffrey
      Huang and Michael Chan.

  24) Don't actively scan radar channels, from Antonio Quartulli"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (110 commits)
  net: phy: reset only targeted phy
  bnxt_en: Setup uc_list mac filters after resetting the chip.
  bnxt_en: enforce proper storing of MAC address
  bnxt_en: Fixed incorrect implementation of ndo_set_mac_address
  net: lpc_eth: remove irq > NR_IRQS check from probe()
  net_sched: fix qdisc_tree_decrease_qlen() races
  openvswitch: fix hangup on vxlan/gre/geneve device deletion
  ipv4: igmp: Allow removing groups from a removed interface
  ipv6: sctp: implement sctp_v6_destroy_sock()
  arm64: bpf: add 'store immediate' instruction
  ipv6: kill sk_dst_lock
  ipv6: sctp: add rcu protection around np->opt
  net/neighbour: fix crash at dumping device-agnostic proxy entries
  sctp: use GFP_USER for user-controlled kmalloc
  sctp: convert sack_needed and sack_generation to bits
  ipv6: add complete rcu protection around np->opt
  bpf: fix allocation warnings in bpf maps and integer overflow
  mvebu: dts: enable IP checksum with jumbo frames for Armada 38x on Port0
  net: mvneta: enable setting custom TX IP checksum limit
  net: mvneta: fix error path for building skb
  ...

It is possible to address another chip on same MDIO bus. The case is
correctly handled for media advertising. It is taken into account
only if mii_data->phy_id == phydev->addr. However, this condition
was missing for reset case.

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Call bnxt_cfg_rx_mode() in bnxt_init_chip() to setup uc_list and
mc_list mac address filters.  Before the patch, uc_list is not
setup again after chip reset (such as ethtool ring size change)
and macvlans don't work any more after that.

Modify bnxt_cfg_rx_mode() to return error codes appropriately so
that the init chip sequence can detect any failures.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For PF, the bp->pf.mac_addr always holds the permanent MAC
addr assigned by the HW.  For VF, the bp->vf.mac_addr always
holds the administrator assigned VF MAC addr. The random
generated VF MAC addr should never get stored to bp->vf.mac_addr.
This way, when the VF wants to change the MAC address, we can tell
if the adminstrator has already set it and disallow the VF from
changing it.

v2: Fix compile error if CONFIG_BNXT_SRIOV is not set.

Signed-off-by: Jeffrey Huang <huangjw@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The existing ndo_set_mac_address only copies the new MAC addr
and didn't set the new MAC addr to the HW. The correct way is
to delete the existing default MAC filter from HW and add
the new one. Because of RFS filters are also dependent on the
default mac filter l2 context, the driver must go thru
close_nic() to delete the default MAC and RFS filters, then
open_nic() to set the default MAC address to HW.

Signed-off-by: Jeffrey Huang <huangjw@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the driver is used on an ARM platform with SPARSE_IRQ defined,
semantics of NR_IRQS is different (minimal value of virtual irqs) and
by default it is set to 16, see arch/arm/include/asm/irq.h.

This value may be less than the actual number of virtual irqs, which
may break the driver initialization. The check removal allows to use
the driver on such a platform, and, if irq controller driver works
correctly, the check is not needed on legacy platforms.

Fixes a runtime problem:

    lpc-eth 31060000.ethernet: error getting resources.
    lpc_eth: lpc-eth: not found (-6).

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since Armada 38x SoC can support IP checksum for jumbo frames only on
a single port, it means that this feature should be enabled per-port,
rather than for the whole SoC.

This patch enables setting custom TX IP checksum limit by adding new
optional property to the mvneta device tree node. If not used, by
default 1600B is set for "marvell,armada-370-neta" and 9800B for other
strings, which ensures backward compatibility. Binding documentation
is updated accordingly.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>