linux.git/drivers/net, branch v4.14-rc4

net: stmmac: dwmac-rk: Add RK3128 GMAC support

2017-10-03T22:39:56+00:00

Add constants and callback functions for the dwmac on rk3128 soc.
As can be seen, the base structure is the same, only registers
and the bits in them moved slightly.

Signed-off-by: David Wu 
Signed-off-by: David S. Miller

rndis_host: support Novatel Verizon USB730L

2017-10-03T21:30:46+00:00

Treat the ef/04/01 interface class/subclass/protocol combination used
by the Novatel Verizon USB730L (1410:9030) as a possible RNDIS
interface.

 T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 17 Spd=480 MxCh= 0
 D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  3
 P:  Vendor=1410 ProdID=9030 Rev=03.10
 S:  Manufacturer=Novatel Wireless
 S:  Product=MiFi USB730L
 S:  SerialNumber=0123456789ABCDEF
 C:  #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA
 I:  If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
 I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
 I:  If#= 2 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid

Once the network interface is brought up, the user just needs to run a
DHCP client to get IP address and routing setup.

As a side note, other Novatel Verizon USB730L models with the same
vid:pid end up exposing a standard ECM interface which doesn't require
any other kernel update to make it work.

Signed-off-by: Aleksander Morgado 
Reviewed-by: Bjørn Mork 
Signed-off-by: David S. Miller

mlxsw: spectrum_router: Track RIF of IPIP next hops

2017-10-02T18:18:57+00:00

When considering whether to set RTNH_F_OFFLOAD flag on an IPv6 route,
mlxsw_sp_fib6_entry_offload_set() looks up the mlxsw_sp_nexthop
corresponding to a given route, and decides based on whether the next
hop's offloaded flag was set. When looking for the matching next hop, it
also takes into account the device of the route, which must match next
hop's RIF.

IPIP next hops however hitherto didn't set the RIF. As a result, IPv6
routes forwarding traffic to IP-in-IP netdevices are never marked as
offloaded, even when they actually are.

Thus track RIF of IPIP next hops the same way as that of ETHERNET next
hops.

Fixes: 8f28a3097645 ("mlxsw: spectrum_router: Support IPv6 overlay encap")
Signed-off-by: Petr Machata 
Reviewed-by: Ido Schimmel 
Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller

mlxsw: spectrum_router: Move VRF refcounting

2017-10-02T18:18:57+00:00

When creating a new RIF, bumping RIF count of the containing VR is the
last thing to be done. Symmetrically, when destroying a RIF, RIF count
is first dropped and only then the rest of the cleanup proceeds.

That's a problem for loopback RIFs. Those hold two VR references: one
for overlay and one for underlay. mlxsw_sp_rif_destroy() releases the
overlay one, and the deconfigure() callback the underlay one. But if
both overlay and underlay are the same, and if there are no other
artifacts holding the VR alive, this put actually destroys the VR. Later
on, when mlxsw_sp_rif_destroy() calls mlxsw_sp_vr_put() for the same VR,
the VR will already have been released and the kernel crashes with NULL
pointer dereference.

The underlying problem is that the RIF under destruction ends up
referencing the overlay VR much longer than it claims: all the way until
the call to mlxsw_sp_vr_put(). So line up the reference counting
properly to reflect this. Make corresponding changes in
mlxsw_sp_rif_create() as well for symmetry.

Fixes: 6ddb7426a7d4 ("mlxsw: spectrum_router: Introduce loopback RIFs")
Signed-off-by: Petr Machata 
Reviewed-by: Ido Schimmel 
Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller

net: hns3: Fix an error handling path in 'hclge_rss_init_hw()'

2017-10-02T05:57:24+00:00

If this sanity check fails, we must free 'rss_indir'. Otherwise there is a
memory leak.
'goto err' as done in the other error handling paths to fix it.

Fixes: 46a3df9f9718 ("net: hns3: Fix for setting rss_size incorrectly")
Signed-off-by: Christophe JAILLET 
Signed-off-by: David S. Miller

net: mvpp2: Fix clock resource by adding an optional bus clock

2017-10-02T05:51:40+00:00

On Armada 7K/8K we need to explicitly enable the bus clock. The bus clock
is optional because not all the SoCs need them but at least for Armada
7K/8K it is actually mandatory.

The binding documentation is updating accordingly.

Signed-off-by: Gregory CLEMENT 
Signed-off-by: David S. Miller

r8152: add Linksys USB3GIGV1 id

2017-10-02T05:39:35+00:00

This linksys dongle by default comes up in cdc_ether mode.
This patch allows r8152 to claim the device:
   Bus 002 Device 002: ID 13b1:0041 Linksys

Signed-off-by: Grant Grundler 
Reviewed-by: Douglas Anderson 
Signed-off-by: David S. Miller

ppp: fix __percpu annotation

2017-10-01T02:58:10+00:00

Move sparse annotation right after pointer type.

Fixes sparse warning:
    drivers/net/ppp/ppp_generic.c:1422:13: warning: incorrect type in initializer (different address spaces)
    drivers/net/ppp/ppp_generic.c:1422:13:    expected void const [noderef] *__vpp_verify
    drivers/net/ppp/ppp_generic.c:1422:13:    got int *
    ...

Fixes: e5dadc65f9e0 ("ppp: Fix false xmit recursion detect with two ppp devices")
Signed-off-by: Guillaume Nault 
Signed-off-by: David S. Miller

Merge tag 'mlx5-fixes-2017-09-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

2017-09-29T05:43:43+00:00

Saeed Mahameed says:

====================
mlx5-fixes-2017-09-28

Misc. fixes for mlx5 drivers.
====================

Signed-off-by: David S. Miller

net: dsa: mv88e6xxx: lock mutex when freeing IRQs

2017-09-28T17:28:24+00:00

mv88e6xxx_g2_irq_free locks the registers mutex, but not
mv88e6xxx_g1_irq_free, which results in a stack trace from
assert_reg_lock when unloading the mv88e6xxx module. Fix this.

Fixes: 3460a5770ce9 ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt")
Signed-off-by: Vivien Didelot 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller