Pull USB / Thunderbolt / PHY driver updates from Greg KH:
 "Here is the big set of USB, Thunderbolt, and PHY driver updates for
  6.6-rc1. Included in here are:

   - PHY driver additions and cleanups

   - Thunderbolt minor additions and fixes

   - USB MIDI 2 gadget support added

   - dwc3 driver updates and additions

   - Removal of some old USB wireless code that was missed when that
     codebase was originally removed a few years ago, cleaning up some
     core USB code paths

   - USB core potential use-after-free fixes that syzbot from different
     people/groups keeps tripping over

   - typec updates and additions

   - gadget fixes and cleanups

   - loads of smaller USB core and driver cleanups all over the place

  Full details are in the shortlog. All of these have been in linux-next
  for a while with no reported problems"

* tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
  platform/chrome: cros_ec_typec: Configure Retimer cable type
  tcpm: Avoid soft reset when partner does not support get_status
  usb: typec: tcpm: reset counter when enter into unattached state after try role
  usb: typec: tcpm: set initial svdm version based on pd revision
  USB: serial: option: add FOXCONN T99W368/T99W373 product
  USB: serial: option: add Quectel EM05G variant (0x030e)
  usb: dwc2: add pci_device_id driver_data parse support
  usb: gadget: remove max support speed info in bind operation
  usb: gadget: composite: cleanup function config_ep_by_speed_and_alt()
  usb: gadget: config: remove max speed check in usb_assign_descriptors()
  usb: gadget: unconditionally allocate hs/ss descriptor in bind operation
  usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()
  usb: gadget: add a inline function gether_bitrate()
  usb: gadget: use working speed to calcaulate network bitrate and qlen
  dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support
  usb: dwc3: exynos: Add support for Exynos850 variant
  usb: gadget: udc-xilinx: fix incorrect type in assignment warning
  usb: gadget: udc-xilinx: fix cast from restricted __le16 warning
  usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning
  USB: dwc2: hande irq on dead controller correctly
  ...

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Add locking to read/modify/write PCIe Capability Register accessors
     for Link Control and Root Control
   - Use pci_dev_id() when possible instead of manually composing ID
     from dev->bus->number and dev->devfn

  Resource management:
   - Move prototypes for __weak sysfs resource files to linux/pci.h to
     fix 'no previous prototype' warnings
   - Make more I/O port accesses depend on HAS_IOPORT
   - Use devm_platform_get_and_ioremap_resource() instead of open-coding
     platform_get_resource() followed by devm_ioremap_resource()

  Power management:
   - Ensure devices are powered up while accessing VPD
   - If device is powered-up, keep it that way while polling for PME
   - Only read PCI_PM_CTRL register when available, to avoid reading the
     wrong register and corrupting dev->current_state

  Virtualization:
   - Avoid Secondary Bus Reset on NVIDIA T4 GPUs

  Error handling:
   - Remove unused pci_disable_pcie_error_reporting()
   - Unexport pci_enable_pcie_error_reporting(), used only by aer.c
   - Unexport pcie_port_bus_type, used only by PCI core

  VGA:
   - Simplify and clean up typos in VGA arbiter

  Apple PCIe controller driver:
   - Initialize pcie->nvecs (number of available MSIs) before use

  Broadcom iProc PCIe controller driver:
   - Use of_property_read_bool() instead of low-level accessors for
     boolean properties

  Broadcom STB PCIe controller driver:
   - Assert PERST# when probing BCM2711 because some bootloaders don't
     do it

  Freescale i.MX6 PCIe controller driver:
   - Add .host_deinit() callback so we can clean up things like
     regulators on probe failure or driver unload

  Freescale Layerscape PCIe controller driver:
   - Add support for link-down notification so the endpoint driver can
     process LINK_DOWN events
   - Add suspend/resume support, including manual
     PME_Turn_off/PME_TO_Ack handshake
   - Save Link Capabilities during probe so they can be restored when
     handling a link-up event, since the controller loses the Link Width
     and Link Speed values during reset

  Intel VMD host bridge driver:
   - Fix disable of bridge windows during domain reset; previously we
     cleared the base/limit registers, which actually left the windows
     enabled

  Marvell MVEBU PCIe controller driver:
   - Remove unused busn member

  Microchip PolarFlare PCIe controller driver:
   - Fix interrupt bit definitions so the SEC and DED interrupt handlers
     work correctly
   - Make driver buildable as a module
   - Read FPGA MSI configuration parameters from hardware instead of
     hard-coding them

  Microsoft Hyper-V host bridge driver:
   - To avoid a NULL pointer dereference, skip MSI restore after
     hibernate if MSI/MSI-X hasn't been enabled

  NVIDIA Tegra194 PCIe controller driver:
   - Revert 'PCI: tegra194: Enable support for 256 Byte payload' because
     Linux doesn't know how to reduce MPS from to 256 to 128 bytes for
     endpoints below a switch (because other devices below the switch
     might already be operating), which leads to 'Malformed TLP' errors

  Qualcomm PCIe controller driver:
   - Add DT and driver support for interconnect bandwidth voting for
     'pcie-mem' and 'cpu-pcie' interconnects
   - Fix broken SDX65 'compatible' DT property
   - Configure controller so MHI bus master clock will be switched off
     while in ASPM L1.x states
   - Use alignment restriction from EPF core in EPF MHI driver
   - Add Endpoint eDMA support
   - Add MHI eDMA support
   - Add Snapdragon SM8450 support to the EPF MHI driversupport
   - Add MHI eDMA support
   - Add Snapdragon SM8450 support to the EPF MHI driversupport
   - Add MHI eDMA support
   - Add Snapdragon SM8450 support to the EPF MHI driversupport
   - Add MHI eDMA support
   - Add Snapdragon SM8450 support to the EPF MHI driver
   - Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup
     latency
   - Add sa8775p DT binding and driver support

  Rockchip PCIe controller driver:
   - Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the
     upper 32 bits

  SiFive FU740 PCIe controller driver:
   - Set the supported number of MSI vectors so we can use all available
     MSI interrupts

  Synopsys DesignWare PCIe controller driver:
   - Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and
     dw_pcie_resume_noirq()) to be called by controller driver
     suspend/resume ops, and a controller callback to send PME_Turn_Off

  MicroSemi Switchtec management driver:
   - Add support for PCIe Gen5 devices

  Miscellaneous:
   - Reorder and compress to reduce size of struct pci_dev
   - Fix race in DOE destroy_work_on_stack()
   - Add stubs to avoid casts between incompatible function types
   - Explicitly include correct DT includes to untangle headers"

* tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits)
  PCI: qcom-ep: Add ICC bandwidth voting support
  dt-bindings: PCI: qcom: ep: Add interconnects path
  PCI: qcom-ep: Treat unknown IRQ events as an error
  dt-bindings: PCI: qcom: Fix SDX65 compatible
  PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API
  PCI: epf-mhi: Use iATU for small transfers
  PCI: epf-mhi: Add support for SM8450
  PCI: epf-mhi: Add eDMA support
  PCI: qcom-ep: Add eDMA support
  PCI: epf-mhi: Make use of the alignment restriction from EPF core
  PCI/PM: Only read PCI_PM_CTRL register when available
  PCI: qcom: Add support for sa8775p SoC
  dt-bindings: PCI: qcom: Add sa8775p compatible
  PCI: qcom-ep: Pass alignment restriction to the EPF core
  PCI: Simplify pcie_capability_clear_and_set_word() control flow
  PCI: Tidy config space save/restore messages
  PCI: Fix code formatting inconsistencies
  PCI: Fix typos in docs and comments
  PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos
  PCI: Simplify pci_dev_driver()
  ...

Kalle Valo says:

====================
wireless-next patches for v6.6

The second pull request for v6.6, this time with both stack and driver
changes. Unusually we have only one major new feature but lots of
small cleanup all over, I guess this is due to people have been on
vacation the last month.

Major changes:

rtw89
 - Introduce Time Averaged SAR (TAS) support

* tag 'wireless-next-2023-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (114 commits)
  wifi: rtlwifi: rtl8723: Remove unused function rtl8723_cmd_send_packet()
  wifi: rtw88: usb: kill and free rx urbs on probe failure
  wifi: rtw89: Fix clang -Wimplicit-fallthrough in rtw89_query_sar()
  wifi: rtw89: phy: modify register setting of ENV_MNTR, PHYSTS and DIG
  wifi: rtw89: phy: add phy_gen_def::cr_base to support WiFi 7 chips
  wifi: rtw89: mac: define register address of rx_filter to generalize code
  wifi: rtw89: mac: define internal memory address for WiFi 7 chip
  wifi: rtw89: mac: generalize code to indirectly access WiFi internal memory
  wifi: rtw89: mac: add mac_gen_def::band1_offset to map MAC band1 register address
  wifi: wlcore: sdio: Use module_sdio_driver macro to simplify the code
  wifi: rtw89: initialize multi-channel handling
  wifi: rtw89: provide functions to configure NoA for beacon update
  wifi: rtw89: call rtw89_chan_get() by vif chanctx if aware of vif
  wifi: rtw89: sar: let caller decide the center frequency to query
  wifi: rtw89: refine rtw89_correct_cck_chan() by rtw89_hw_to_nl80211_band()
  wifi: rtw89: add function prototype for coex request duration
  Fix nomenclature for USB and PCI wireless devices
  wifi: ath: Use is_multicast_ether_addr() to check multicast Ether address
  wifi: ath12k: Remove unused declarations
  wifi: ath12k: add check max message length while scanning with extraie
  ...
====================

Link: https://lore.kernel.org/r/20230825132230.A0833C433C8@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ath.git patches for v6.6. No major changes, only smaller fixes and
cleanups this time.

The function rtl8723_cmd_send_packet() is not used anywhere, so remove it.

Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230824062339.1885385-1-ruanjinjie@huawei.com

After rtw_usb_alloc_rx_bufs() has been called rx urbs have been
allocated and must be freed in the error path. After rtw_usb_init_rx()
has been called they are submitted, so they also must be killed.

Add these forgotten steps to the probe error path.

Besides the lost memory this also fixes a problem when the driver
fails to download the firmware in rtw_chip_info_setup(). In this
case it can happen that the completion of the rx urbs handler runs
at a time when we already freed our data structures resulting in
a kernel crash.

Fixes: a82dfd33d123 ("wifi: rtw88: Add common USB chip support")
Cc: stable@vger.kernel.org
Reported-by: Ilgaz Öcal <ilgaz@ilgaz.gen.tr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230823075021.588596-1-s.hauer@pengutronix.de

clang warns (or errors with CONFIG_WERROR=y):

  drivers/net/wireless/realtek/rtw89/sar.c:216:3: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
    216 |                 case RTW89_TAS_STATE_DPR_FORBID:
        |                 ^
  drivers/net/wireless/realtek/rtw89/sar.c:216:3: note: insert 'break;' to avoid fall-through
    216 |                 case RTW89_TAS_STATE_DPR_FORBID:
        |                 ^
        |                 break;
  1 error generated.

Clang is a little more pedantic than GCC, which does not warn when
falling through to a case that is just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst, which
states that all switch/case blocks must end in either break,
fallthrough, continue, goto, or return. Add the missing break to silence
the warning.

Closes: https://github.com/ClangBuiltLinux/linux/issues/1921
Fixes: eb2624f55ad1 ("wifi: rtw89: Introduce Time Averaged SAR (TAS) feature")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230822-rtw89-tas-clang-implicit-fallthrough-v1-1-5cb73f0fa976@kernel.org

The ENV_MNTR(environment monitor) is the dynamic mechanism which based on
the HW of CCX(Cisco Compatible Extensions) which provide the channel
loading and noisy level indicator to debug or support the 802.11k. The
PHYSTS provide the detail PHY information per packet we received for
debugging. The DIG(dynamic initial gain) is the dynamic mechanism to
adjust the packet detect power level by received signal strength to avoid
false detection of the WiFi packet.

The address of registers used for ENV_MNTR, PHYSTS and DIG of WiFi 7 IC
are different with WiFi 6 series, so we modify the method to access the
register address in order to compatible with all WiFi 7 and 6 ICs.

Signed-off-by: Cheng-Chieh Hsieh <cj.hsieh@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230822125822.23817-7-pkshih@realtek.com

cr_base is base address of PHY control register. The base of WiFi 6 and 7
chips are 0x1_0000 and 0x2_0000 respectively, so define them accordingly.
For example, if PHY address is 0x1330, absolute address is 0x1_1330 for
WiFi 6 chips, and 0x2_1330 for WiFi 7 chips.

Meanwhile, there are two copies of PHY hardware named PHY0 and PHY1. The
offset between them is 0x2_0000, so the base address of PHY0 and PHY1 are
0x2_0000 and 0x4_0000 respectively.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230822125822.23817-6-pkshih@realtek.com

rx_filter is used to decide which kind of packets are received to driver,
or just dropped by MAC layer to reduce bus traffic.

The bit definitions of old and new chips are the sames, but only address
is changed, so define a field to generalize usage.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230822125822.23817-5-pkshih@realtek.com