linux.git/drivers/net/wireless, branch v6.1 Linux kernel source tree wifi: wilc1000: validate number of channels 2022-11-24T16:11:23+00:00 Phil Turnbull philipturnbull@github.com 2022-11-23T15:35:43+00:00 0cdfa9e6f0915e3d243e2393bfa8a22e12d553b0 There is no validation of 'e->no_of_channels' which can trigger an out-of-bounds write in the following 'memset' call. Validate that the number of channels does not extends beyond the size of the channel list element. Signed-off-by: Phil Turnbull <philipturnbull@github.com> Tested-by: Ajay Kathat <ajay.kathat@microchip.com> Acked-by: Ajay Kathat <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221123153543.8568-5-philipturnbull@github.com 
There is no validation of 'e->no_of_channels' which can trigger an
out-of-bounds write in the following 'memset' call. Validate that the
number of channels does not extends beyond the size of the channel list
element.

Signed-off-by: Phil Turnbull <philipturnbull@github.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Acked-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221123153543.8568-5-philipturnbull@github.com
wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_CHANNEL_LIST attribute 2022-11-24T16:11:23+00:00 Phil Turnbull philipturnbull@github.com 2022-11-23T15:35:42+00:00 f9b62f9843c7b0afdaecabbcebf1dbba18599408 Validate that the IEEE80211_P2P_ATTR_CHANNEL_LIST attribute contains enough space for a 'struct wilc_attr_oper_ch'. If the attribute is too small then it can trigger an out-of-bounds write later in the function. 'struct wilc_attr_oper_ch' is variable sized so also check 'attr_len' does not extend beyond the end of 'buf'. Signed-off-by: Phil Turnbull <philipturnbull@github.com> Tested-by: Ajay Kathat <ajay.kathat@microchip.com> Acked-by: Ajay Kathat <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221123153543.8568-4-philipturnbull@github.com 
Validate that the IEEE80211_P2P_ATTR_CHANNEL_LIST attribute contains
enough space for a 'struct wilc_attr_oper_ch'. If the attribute is too
small then it can trigger an out-of-bounds write later in the function.

'struct wilc_attr_oper_ch' is variable sized so also check 'attr_len'
does not extend beyond the end of 'buf'.

Signed-off-by: Phil Turnbull <philipturnbull@github.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Acked-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221123153543.8568-4-philipturnbull@github.com
wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_OPER_CHANNEL attribute 2022-11-24T16:11:23+00:00 Phil Turnbull philipturnbull@github.com 2022-11-23T15:35:41+00:00 051ae669e4505abbe05165bebf6be7922de11f41 Validate that the IEEE80211_P2P_ATTR_OPER_CHANNEL attribute contains enough space for a 'struct struct wilc_attr_oper_ch'. If the attribute is too small then it triggers an out-of-bounds write later in the function. Signed-off-by: Phil Turnbull <philipturnbull@github.com> Tested-by: Ajay Kathat <ajay.kathat@microchip.com> Acked-by: Ajay Kathat <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221123153543.8568-3-philipturnbull@github.com 
Validate that the IEEE80211_P2P_ATTR_OPER_CHANNEL attribute contains
enough space for a 'struct struct wilc_attr_oper_ch'. If the attribute is
too small then it triggers an out-of-bounds write later in the function.

Signed-off-by: Phil Turnbull <philipturnbull@github.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Acked-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221123153543.8568-3-philipturnbull@github.com
wifi: wilc1000: validate pairwise and authentication suite offsets 2022-11-24T16:11:23+00:00 Phil Turnbull philipturnbull@github.com 2022-11-23T15:35:40+00:00 cd21d99e595ec1d8721e1058dcdd4f1f7de1d793 There is no validation of 'offset' which can trigger an out-of-bounds read when extracting RSN capabilities. Signed-off-by: Phil Turnbull <philipturnbull@github.com> Tested-by: Ajay Kathat <ajay.kathat@microchip.com> Acked-by: Ajay Kathat <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221123153543.8568-2-philipturnbull@github.com 
There is no validation of 'offset' which can trigger an out-of-bounds
read when extracting RSN capabilities.

Signed-off-by: Phil Turnbull <philipturnbull@github.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Acked-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221123153543.8568-2-philipturnbull@github.com
wifi: ath11k: avoid deadlock during regulatory update in ath11k_regd_update() 2022-11-02T17:16:45+00:00 Wen Gong quic_wgong@quicinc.com 2022-11-02T11:48:03+00:00 f45cb6b29cd36514e13f7519770873d8c0457008 (cherry picked from commit d99884ad9e3673a12879bc2830f6e5a66cccbd78 in ath-next as users are seeing this bug more now, also cc stable) Running this test in a loop it is easy to reproduce an rtnl deadlock: iw reg set FI ifconfig wlan0 down What happens is that thread A (workqueue) tries to update the regulatory: try to acquire the rtnl_lock of ar->regd_update_work rtnl_lock+0x17/0x20 ath11k_regd_update+0x15a/0x260 [ath11k] ath11k_regd_update_work+0x15/0x20 [ath11k] process_one_work+0x228/0x670 worker_thread+0x4d/0x440 kthread+0x16d/0x1b0 ret_from_fork+0x22/0x30 And thread B (ifconfig) tries to stop the interface: try to cancel_work_sync(&ar->regd_update_work) in ath11k_mac_op_stop(). ifconfig 3109 [003] 2414.232506: probe: ath11k_mac_op_stop: (ffffffffc14187a0) drv_stop+0x30 ([mac80211]) ieee80211_do_stop+0x5d2 ([mac80211]) ieee80211_stop+0x3e ([mac80211]) __dev_close_many+0x9e ([kernel.kallsyms]) __dev_change_flags+0xbe ([kernel.kallsyms]) dev_change_flags+0x23 ([kernel.kallsyms]) devinet_ioctl+0x5e3 ([kernel.kallsyms]) inet_ioctl+0x197 ([kernel.kallsyms]) sock_do_ioctl+0x4d ([kernel.kallsyms]) sock_ioctl+0x264 ([kernel.kallsyms]) __x64_sys_ioctl+0x92 ([kernel.kallsyms]) do_syscall_64+0x3a ([kernel.kallsyms]) entry_SYSCALL_64_after_hwframe+0x63 ([kernel.kallsyms]) __GI___ioctl+0x7 (/lib/x86_64-linux-gnu/libc-2.23.so) The sequence of deadlock is: 1. Thread B calls rtnl_lock(). 2. Thread A starts to run and calls rtnl_lock() from within ath11k_regd_update_work(), then enters wait state because the lock is owned by thread B. 3. Thread B continues to run and tries to call cancel_work_sync(&ar->regd_update_work), but thread A is in ath11k_regd_update_work() waiting for rtnl_lock(). So cancel_work_sync() forever waits for ath11k_regd_update_work() to finish and we have a deadlock. Fix this by switching from using regulatory_set_wiphy_regd_sync() to regulatory_set_wiphy_regd(). Now cfg80211 will schedule another workqueue which handles the locking on it's own. So the ath11k workqueue can simply exit without taking any locks, avoiding the deadlock. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Cc: <stable@vger.kernel.org> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> [kvalo: improve commit log] Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> 
(cherry picked from commit d99884ad9e3673a12879bc2830f6e5a66cccbd78 in ath-next
as users are seeing this bug more now, also cc stable)

Running this test in a loop it is easy to reproduce an rtnl deadlock:

iw reg set FI
ifconfig wlan0 down

What happens is that thread A (workqueue) tries to update the regulatory:

    try to acquire the rtnl_lock of ar->regd_update_work

    rtnl_lock+0x17/0x20
    ath11k_regd_update+0x15a/0x260 [ath11k]
    ath11k_regd_update_work+0x15/0x20 [ath11k]
    process_one_work+0x228/0x670
    worker_thread+0x4d/0x440
    kthread+0x16d/0x1b0
    ret_from_fork+0x22/0x30

And thread B (ifconfig) tries to stop the interface:

    try to cancel_work_sync(&ar->regd_update_work) in ath11k_mac_op_stop().
    ifconfig  3109 [003]  2414.232506: probe:

    ath11k_mac_op_stop: (ffffffffc14187a0)
    drv_stop+0x30 ([mac80211])
    ieee80211_do_stop+0x5d2 ([mac80211])
    ieee80211_stop+0x3e ([mac80211])
    __dev_close_many+0x9e ([kernel.kallsyms])
    __dev_change_flags+0xbe ([kernel.kallsyms])
    dev_change_flags+0x23 ([kernel.kallsyms])
    devinet_ioctl+0x5e3 ([kernel.kallsyms])
    inet_ioctl+0x197 ([kernel.kallsyms])
    sock_do_ioctl+0x4d ([kernel.kallsyms])
    sock_ioctl+0x264 ([kernel.kallsyms])
    __x64_sys_ioctl+0x92 ([kernel.kallsyms])
    do_syscall_64+0x3a ([kernel.kallsyms])
    entry_SYSCALL_64_after_hwframe+0x63 ([kernel.kallsyms])
    __GI___ioctl+0x7 (/lib/x86_64-linux-gnu/libc-2.23.so)

The sequence of deadlock is:

1. Thread B calls rtnl_lock().

2. Thread A starts to run and calls rtnl_lock() from within
   ath11k_regd_update_work(), then enters wait state because the lock is owned by
   thread B.

3. Thread B continues to run and tries to call
   cancel_work_sync(&ar->regd_update_work), but thread A is in
   ath11k_regd_update_work() waiting for rtnl_lock(). So cancel_work_sync()
   forever waits for ath11k_regd_update_work() to finish and we have a deadlock.

Fix this by switching from using regulatory_set_wiphy_regd_sync() to
regulatory_set_wiphy_regd(). Now cfg80211 will schedule another workqueue which
handles the locking on it's own. So the ath11k workqueue can simply exit without
taking any locks, avoiding the deadlock.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3

Cc: <stable@vger.kernel.org>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
[kvalo: improve commit log]
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
wifi: ath11k: Fix QCN9074 firmware boot on x86 2022-11-02T17:14:06+00:00 Tyler J. Stachecki stachecki.tyler@gmail.com 2022-11-02T16:56:39+00:00 3a89b6dec9920026eaa90fe8457f4348d3388a98 The 2.7.0 series of QCN9074's firmware requests 5 segments of memory instead of 3 (as in the 2.5.0 series). The first segment (11M) is too large to be kalloc'd in one go on x86 and requires piecemeal 1MB allocations, as was the case with the prior public firmware (2.5.0, 15M). Since f6f92968e1e5, ath11k will break the memory requests, but only if there were fewer than 3 segments requested by the firmware. It seems that 5 segments works fine and allows QCN9074 to boot on x86 with firmware 2.7.0, so change things accordingly. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.16 Signed-off-by: Tyler J. Stachecki <stachecki.tyler@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221022042728.43015-1-stachecki.tyler@gmail.com 
The 2.7.0 series of QCN9074's firmware requests 5 segments
of memory instead of 3 (as in the 2.5.0 series).

The first segment (11M) is too large to be kalloc'd in one
go on x86 and requires piecemeal 1MB allocations, as was
the case with the prior public firmware (2.5.0, 15M).

Since f6f92968e1e5, ath11k will break the memory requests,
but only if there were fewer than 3 segments requested by
the firmware. It seems that 5 segments works fine and
allows QCN9074 to boot on x86 with firmware 2.7.0, so
change things accordingly.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.16

Signed-off-by: Tyler J. Stachecki <stachecki.tyler@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221022042728.43015-1-stachecki.tyler@gmail.com
wifi: brcmfmac: Fix potential buffer overflow in brcmf_fweh_event_worker() 2022-11-01T11:14:20+00:00 Dokyung Song dokyung.song@gmail.com 2022-10-21T06:13:59+00:00 6788ba8aed4e28e90f72d68a9d794e34eac17295 This patch fixes an intra-object buffer overflow in brcmfmac that occurs when the device provides a 'bsscfgidx' equal to or greater than the buffer size. The patch adds a check that leads to a safe failure if that is the case. This fixes CVE-2022-3628. UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c index 52 is out of range for type 'brcmf_if *[16]' CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds+0x69/0x80 ? memcpy+0x39/0x60 brcmf_fweh_event_worker+0xae1/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 ================================================================================ general protection fault, probably for non-canonical address 0xe5601c0020023fff: 0000 [#1] SMP KASAN KASAN: maybe wild-memory-access in range [0x2b0100010011fff8-0x2b0100010011ffff] CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: brcmf_fweh_event_worker+0x117/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 Modules linked in: 88XXau(O) 88x2bu(O) ---[ end trace 41d302138f3ff55a ]--- RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Reviewed-by: Arend van Spriel <aspriel@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dokyung Song <dokyung.song@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221021061359.GA550858@laguna 
This patch fixes an intra-object buffer overflow in brcmfmac that occurs
when the device provides a 'bsscfgidx' equal to or greater than the
buffer size. The patch adds a check that leads to a safe failure if that
is the case.

This fixes CVE-2022-3628.

UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
index 52 is out of range for type 'brcmf_if *[16]'
CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G           O      5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: events brcmf_fweh_event_worker
Call Trace:
 dump_stack_lvl+0x57/0x7d
 ubsan_epilogue+0x5/0x40
 __ubsan_handle_out_of_bounds+0x69/0x80
 ? memcpy+0x39/0x60
 brcmf_fweh_event_worker+0xae1/0xc00
 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 process_one_work+0x873/0x13e0
 ? lock_release+0x640/0x640
 ? pwq_dec_nr_in_flight+0x320/0x320
 ? rwlock_bug.part.0+0x90/0x90
 worker_thread+0x8b/0xd10
 ? __kthread_parkme+0xd9/0x1d0
 ? process_one_work+0x13e0/0x13e0
 kthread+0x379/0x450
 ? _raw_spin_unlock_irq+0x24/0x30
 ? set_kthread_struct+0x100/0x100
 ret_from_fork+0x1f/0x30
================================================================================
general protection fault, probably for non-canonical address 0xe5601c0020023fff: 0000 [#1] SMP KASAN
KASAN: maybe wild-memory-access in range [0x2b0100010011fff8-0x2b0100010011ffff]
CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G           O      5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: events brcmf_fweh_event_worker
RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100
Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00
RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207
RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000
RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50
RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809
R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045
R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000
FS:  0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 brcmf_fweh_event_worker+0x117/0xc00
 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 process_one_work+0x873/0x13e0
 ? lock_release+0x640/0x640
 ? pwq_dec_nr_in_flight+0x320/0x320
 ? rwlock_bug.part.0+0x90/0x90
 worker_thread+0x8b/0xd10
 ? __kthread_parkme+0xd9/0x1d0
 ? process_one_work+0x13e0/0x13e0
 kthread+0x379/0x450
 ? _raw_spin_unlock_irq+0x24/0x30
 ? set_kthread_struct+0x100/0x100
 ret_from_fork+0x1f/0x30
Modules linked in: 88XXau(O) 88x2bu(O)
---[ end trace 41d302138f3ff55a ]---
RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100
Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00
RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207
RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000
RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50
RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809
R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045
R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000
FS:  0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Kernel panic - not syncing: Fatal exception

Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Reviewed-by: Arend van Spriel <aspriel@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dokyung Song <dokyung.song@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221021061359.GA550858@laguna
wifi: airo: do not assign -1 to unsigned char 2022-11-01T09:15:15+00:00 Jason A. Donenfeld Jason@zx2c4.com 2022-10-24T16:28:43+00:00 e6cb8769452e8236b52134e5cb4a18b8f5986932 With char becoming unsigned by default, and with `char` alone being ambiguous and based on architecture, we get a warning when assigning the unchecked output of hex_to_bin() to that unsigned char. Mark `key` as a `u8`, which matches the struct's type, and then check each call to hex_to_bin() before casting. Cc: Kalle Valo <kvalo@kernel.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221024162843.535921-1-Jason@zx2c4.com 
With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, we get a warning when assigning the
unchecked output of hex_to_bin() to that unsigned char. Mark `key` as a
`u8`, which matches the struct's type, and then check each call to
hex_to_bin() before casting.

Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221024162843.535921-1-Jason@zx2c4.com
wifi: mac80211_hwsim: fix debugfs attribute ps with rc table support 2022-10-21T10:37:28+00:00 Jonas Jelonek jelonek.jonas@gmail.com 2022-10-14T14:54:39+00:00 69188df5f6e4cecc6b76b958979ba363cd5240e8 Fixes a warning that occurs when rc table support is enabled (IEEE80211_HW_SUPPORTS_RC_TABLE) in mac80211_hwsim and the PS mode is changed via the exported debugfs attribute. When the PS mode is changed, a packet is broadcasted via hwsim_send_nullfunc by creating and transmitting a plain skb with only header initialized. The ieee80211 rate array in the control buffer is zero-initialized. When ratetbl support is enabled, ieee80211_get_tx_rates is called for the skb with sta parameter set to NULL and thus no ratetbl can be used. The final rate array then looks like [-1,0; 0,0; 0,0; 0,0] which causes the warning in ieee80211_get_tx_rate. The issue is fixed by setting the count of the first rate with idx '0' to 1 and hence ieee80211_get_tx_rates won't overwrite it with idx '-1'. Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Fixes a warning that occurs when rc table support is enabled
(IEEE80211_HW_SUPPORTS_RC_TABLE) in mac80211_hwsim and the PS mode
is changed via the exported debugfs attribute.

When the PS mode is changed, a packet is broadcasted via
hwsim_send_nullfunc by creating and transmitting a plain skb with only
header initialized. The ieee80211 rate array in the control buffer is
zero-initialized. When ratetbl support is enabled, ieee80211_get_tx_rates
is called for the skb with sta parameter set to NULL and thus no
ratetbl can be used. The final rate array then looks like
[-1,0; 0,0; 0,0; 0,0] which causes the warning in ieee80211_get_tx_rate.

The issue is fixed by setting the count of the first rate with idx '0'
to 1 and hence ieee80211_get_tx_rates won't overwrite it with idx '-1'.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
wifi: rt2x00: use explicitly signed or unsigned types 2022-10-21T06:59:39+00:00 Jason A. Donenfeld Jason@zx2c4.com 2022-10-19T15:55:41+00:00 66063033f77e10b985258126a97573f84bb8d3b4 On some platforms, `char` is unsigned, but this driver, for the most part, assumed it was signed. In other places, it uses `char` to mean an unsigned number, but only in cases when the values are small. And in still other places, `char` is used as a boolean. Put an end to this confusion by declaring explicit types, depending on the context. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Stanislaw Gruszka <stf_xl@wp.pl> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Kalle Valo <kvalo@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221019155541.3410813-1-Jason@zx2c4.com 
On some platforms, `char` is unsigned, but this driver, for the most
part, assumed it was signed. In other places, it uses `char` to mean an
unsigned number, but only in cases when the values are small. And in
still other places, `char` is used as a boolean. Put an end to this
confusion by declaring explicit types, depending on the context.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Helmut Schaa <helmut.schaa@googlemail.com>
Cc: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221019155541.3410813-1-Jason@zx2c4.com