commit 174e23810cd31
("sk_buff: drop all skb extensions on free and skb scrubbing") made napi
recycle always drop skb extensions.  The additional skb_ext_del() that is
performed via nf_reset on napi skb recycle is not needed anymore.

Most nf_reset() calls in the stack are there so queued skb won't block
'rmmod nf_conntrack' indefinitely.

This removes the skb_ext_del from nf_reset, and renames it to a more
fitting nf_reset_ct().

In a few selected places, add a call to skb_ext_reset to make sure that
no active extensions remain.

I am submitting this for "net", because we're still early in the release
cycle.  The patch applies to net-next too, but I think the rename causes
needless divergence between those trees.

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Pull networking fixes from David Miller:

 1) Sanity check URB networking device parameters to avoid divide by
    zero, from Oliver Neukum.

 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
    don't work properly. Longer term this needs a better fix tho. From
    Vijay Khemka.

 3) Small fixes to selftests (use ping when ping6 is not present, etc.)
    from David Ahern.

 4) Bring back rt_uses_gateway member of struct rtable, it's semantics
    were not well understood and trying to remove it broke things. From
    David Ahern.

 5) Move usbnet snaity checking, ignore endpoints with invalid
    wMaxPacketSize. From Bjørn Mork.

 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.

 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
    Alex Vesker, and Yevgeny Kliteynik

 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.

 9) Fix crash when removing sch_cbs entry while offloading is enabled,
    from Vinicius Costa Gomes.

10) Signedness bug fixes, generally in looking at the result given by
    of_get_phy_mode() and friends. From Dan Crapenter.

11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.

12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.

13) Fix quantization code in tcp_bbr, from Kevin Yang.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
  net: tap: clean up an indentation issue
  nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
  tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
  sk_buff: drop all skb extensions on free and skb scrubbing
  tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
  mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
  Documentation: Clarify trap's description
  mlxsw: spectrum: Clear VLAN filters during port initialization
  net: ena: clean up indentation issue
  NFC: st95hf: clean up indentation issue
  net: phy: micrel: add Asym Pause workaround for KSZ9021
  net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
  ptp: correctly disable flags on old ioctls
  lib: dimlib: fix help text typos
  net: dsa: microchip: Always set regmap stride to 1
  nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
  nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
  net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
  vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
  net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
  ...

Kalle Valo says:

====================
wireless-drivers fixes for 5.4

First set of fixes for 5.4 sent during the merge window. Most are
regressions fixes but the mt7615 problem has been since it was merged.

iwlwifi

* fix a build regression related CONFIG_THERMAL

* avoid using GEO_TX_POWER_LIMIT command on certain firmware versions

rtw88

* fixes for skb leaks

zd1211rw

* fix a compiler warning on 32 bit

mt76

* fix the firmware paths for mt7615 to match with linux-firmware

wil6210

* fix use of skb after free
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
    $ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The debug code dereferences "skb" to print "skb->len" so we have to
print the message before we free "skb".

Fixes: f99fe49ff372 ("wil6210: add wil_netif_rx() helper function")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

The intention was to have the GEO_TX_POWER_LIMIT command in FW version
36 as well, but not all 8000 family got this feature enabled.  The
8000 family is the only one using version 36, so skip this version
entirely.  If we try to send this command to the firmwares that do not
support it, we get a BAD_COMMAND response from the firmware.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=204151.

Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

mt7615 patch/n9/cr4 firmwares are available in mediatek folder in
linux-firmware repository. Because of this mt7615 won't work on regular
distributions like Ubuntu. Fix path definitions.  Moreover remove useless
firmware name pointers and use definitions directly

Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Cc: stable@vger.kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

After firmware has been downloaded, driver should send
some information to it through H2C commands. Those H2C
commands are transmitted through TX path.

But before HCI has been started, the TX path is not
working completely. Such as PCI interfaces, the interrupts
are not enabled, hence TX interrupts will not be issued
after H2C skb has been DMAed to the device. And the H2C
skbs will not be released until the device is powered off.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it
     (Krzysztof Wilczynski)

   - Fix incorrect PCIe device types and remove dev->has_secondary_link
     to simplify code that deals with upstream/downstream ports (Mika
     Westerberg)

   - After suspend, restore Resizable BAR size bits correctly for 1MB
     BARs (Sumit Saxena)

   - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra)

  Virtualization:

   - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna
     Labs (Ali Saidi)

   - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg)

   - Remove group write permissions from sysfs sriov_numvfs,
     sriov_drivers_autoprobe (Kelsey Skunberg)

  Hotplug:

   - Simplify pciehp indicator control (Denis Efremov)

  Peer-to-peer DMA:

   - Allow P2P DMA between root ports for whitelisted bridges (Logan
     Gunthorpe)

   - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe)

   - DMA map P2P DMA requests that traverse host bridge (Logan
     Gunthorpe)

  Amazon Annapurna Labs host bridge driver:

   - Add DT binding and controller driver (Jonathan Chocron)

  Hyper-V host bridge driver:

   - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui)

   - Fix PCI domain number collisions (Haiyang Zhang)

   - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang)

   - Fix build errors on non-SYSFS config (Randy Dunlap)

  i.MX6 host bridge driver:

   - Limit DBI register length (Stefan Agner)

  Intel VMD host bridge driver:

   - Fix config addressing issues (Jon Derrick)

  Layerscape host bridge driver:

   - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao)

   - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately
     (Xiaowei Bao)

  Mediatek host bridge driver:

   - Add MT7629 controller support (Jianjun Wang)

  Mobiveil host bridge driver:

   - Fix CPU base address setup (Hou Zhiqiang)

   - Make "num-lanes" property optional (Hou Zhiqiang)

  Tegra host bridge driver:

   - Fix OF node reference leak (Nishka Dasgupta)

   - Disable MSI for root ports to work around design problem (Vidya
     Sagar)

   - Add Tegra194 DT binding and controller support (Vidya Sagar)

   - Add support for sideband pins and slot regulators (Vidya Sagar)

   - Add PIPE2UPHY support (Vidya Sagar)

  Misc:

   - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg)

   - Unexport pci_bus_get(), etc (Kelsey Skunberg)

   - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in
     the PCI core (Kelsey Skunberg)

   - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg)

   - Mark expected switch fall-through (Gustavo A. R. Silva)

   - Propagate errors for optional regulators and PHYs (Thierry Reding)

   - Fix kernel command line resource_alignment parameter issues (Logan
     Gunthorpe)"

* tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits)
  PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI
  arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
  arm64: tegra: Add configuration for PCIe C5 sideband signals
  PCI: tegra: Add support to enable slot regulators
  PCI: tegra: Add support to configure sideband pins
  PCI: vmd: Fix shadow offsets to reflect spec changes
  PCI: vmd: Fix config addressing when using bus offsets
  PCI: dwc: Add validation that PCIe core is set to correct mode
  PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver
  dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding
  PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port
  PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port
  PCI: Add ACS quirk for Amazon Annapurna Labs root ports
  PCI: Add Amazon's Annapurna Labs vendor ID
  MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer
  PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers
  dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
  dt-bindings: PCI: tegra: Add sideband pins configuration entries
  PCI: tegra: Add Tegra194 PCIe support
  PCI: Get rid of dev->has_secondary_link flag
  ...

On 32-bit:

    drivers/net/wireless/zydas/zd1211rw/zd_usb.c: In function ‘check_read_regs’:
    drivers/net/wireless/zydas/zd1211rw/zd_def.h:18:25: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 6 has type ‘size_t’ {aka ‘unsigned int’} [-Wformat=]
      dev_printk(level, dev, "%s() " fmt, __func__, ##args)
			     ^~~~~~~
    drivers/net/wireless/zydas/zd1211rw/zd_def.h:22:4: note: in expansion of macro ‘dev_printk_f’
	dev_printk_f(KERN_DEBUG, dev, fmt, ## args)
	^~~~~~~~~~~~
    drivers/net/wireless/zydas/zd1211rw/zd_usb.c:1635:3: note: in expansion of macro ‘dev_dbg_f’
       dev_dbg_f(zd_usb_dev(usb),
       ^~~~~~~~~
    drivers/net/wireless/zydas/zd1211rw/zd_usb.c:1636:51: note: format string is defined here
	 "error: actual length %d less than expected %ld\n",
						     ~~^
						     %d

Fixes: 84b0b66352470e64 ("zd1211rw: zd_usb: Use struct_size() helper")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>