Johannes Berg says:

====================
Here are quite a large number of fixes, notably:
 * various A-MSDU building fixes (currently only affects mt76)
 * syzkaller & spectre fixes in hwsim
 * TXQ vs. teardown fix that was causing crashes
 * embed WMM info in reg rule, bad code here had been causing crashes
 * one compilation issue with fix from Arnd (rfkill-gpio includes)
 * fixes for a race and bad data during/after channel switch
 * nl80211: a validation fix, attribute type & unit fixes
along with other small fixes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

User controls @idx which to be used as index of hwsim_world_regdom_custom.
So, It can be exploited via Spectre-like attack. (speculative execution)

This kind of attack leaks address of hwsim_world_regdom_custom,
It leads an attacker to bypass security mechanism such as KASLR.

So sanitize @idx before using it to prevent attack.

I leveraged strategy [1] to find and exploit this gadget.

[1] https://github.com/jinb-park/linux-exploit/tree/master/exploit-remaining-spectre-gadget/

Signed-off-by: Jinbum Park <jinb.park7@gmail.com>
[johannes: unwrap URL]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Make wmm_rule be part of the reg_rule structure. This simplifies the
code a lot at the cost of having bigger memory usage. However in most
cases we have only few reg_rule's and when we do have many like in
iwlwifi we do not save memory as it allocates a separate wmm_rule for
each channel anyway.

This also fixes a bug reported in various places where somewhere the
pointers were corrupted and we ended up doing a null-dereference.

Fixes: 230ebaa189af ("cfg80211: read wmm rules from regulatory database")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
[rephrase commit message slightly]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The mac80211_hwsim driver intends to say that it supports up to four
STBC receive streams, but instead it ends up saying something undefined.
The IEEE80211_VHT_CAP_RXSTBC_X macros aren't independent bits that can
be ORed together, but values.  In this case, _4 is the appropriate one
to use.

Signed-off-by: Danek Duvall <duvall@comfychair.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Pull char/misc driver updates from Greg KH:
 "Here is the bit set of char/misc drivers for 4.19-rc1

  There is a lot here, much more than normal, seems like everyone is
  writing new driver subsystems these days... Anyway, major things here
  are:

   - new FSI driver subsystem, yet-another-powerpc low-level hardware
     bus

   - gnss, finally an in-kernel GPS subsystem to try to tame all of the
     crazy out-of-tree drivers that have been floating around for years,
     combined with some really hacky userspace implementations. This is
     only for GNSS receivers, but you have to start somewhere, and this
     is great to see.

  Other than that, there are new slimbus drivers, new coresight drivers,
  new fpga drivers, and loads of DT bindings for all of these and
  existing drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  android: binder: Rate-limit debug and userspace triggered err msgs
  fsi: sbefifo: Bump max command length
  fsi: scom: Fix NULL dereference
  misc: mic: SCIF Fix scif_get_new_port() error handling
  misc: cxl: changed asterisk position
  genwqe: card_base: Use true and false for boolean values
  misc: eeprom: assignment outside the if statement
  uio: potential double frees if __uio_register_device() fails
  eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
  misc: ti-st: Fix memory leak in the error path of probe()
  android: binder: Show extra_buffers_size in trace
  firmware: vpd: Fix section enabled flag on vpd_section_destroy
  platform: goldfish: Retire pdev_bus
  goldfish: Use dedicated macros instead of manual bit shifting
  goldfish: Add missing includes to goldfish.h
  mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
  dt-bindings: mux: add adi,adgs1408
  Drivers: hv: vmbus: Cleanup synic memory free path
  Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
  Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
  ...

Pull pci updates from Bjorn Helgaas:

 - Decode AER errors with names similar to "lspci" (Tyler Baicar)

 - Expose AER statistics in sysfs (Rajat Jain)

 - Clear AER status bits selectively based on the type of recovery (Oza
   Pawandeep)

 - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru
   Gagniuc)

 - Don't clear AER status bits if we're using the "Firmware-First"
   strategy where firmware owns the registers (Alexandru Gagniuc)

 - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy
   Shevchenko)

 - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas)

 - Defer DPC event handling to work queue (Keith Busch)

 - Use threaded IRQ for DPC bottom half (Keith Busch)

 - Print AER status while handling DPC events (Keith Busch)

 - Work around IDT switch ACS Source Validation erratum (James
   Puthukattukaran)

 - Emit diagnostics for all cases of PCIe Link downtraining (Links
   operating slower than they're capable of) (Alexandru Gagniuc)

 - Skip VFs when configuring Max Payload Size (Myron Stowe)

 - Reduce Root Port Max Payload Size if necessary when hot-adding a
   device below it (Myron Stowe)

 - Simplify SHPC existence/permission checks (Bjorn Helgaas)

 - Remove hotplug sample skeleton driver (Lukas Wunner)

 - Convert pciehp to threaded IRQ handling (Lukas Wunner)

 - Improve pciehp tolerance of missed events and initially unstable
   links (Lukas Wunner)

 - Clear spurious pciehp events on resume (Lukas Wunner)

 - Add pciehp runtime PM support, including for Thunderbolt controllers
   (Lukas Wunner)

 - Support interrupts from pciehp bridges in D3hot (Lukas Wunner)

 - Mark fall-through switch cases before enabling -Wimplicit-fallthrough
   (Gustavo A. R. Silva)

 - Move DMA-debug PCI init from arch code to PCI core (Christoph
   Hellwig)

 - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is
   supplied (Heiner Kallweit)

 - Unify PCI and DMA direction #defines (Shunyong Yang)

 - Add PCI_DEVICE_DATA() macro (Andy Shevchenko)

 - Check for VPD completion before checking for timeout (Bert Kenward)

 - Limit Netronome NFP5000 config space size to work around erratum
   (Jakub Kicinski)

 - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit)

 - Document ACPI description of PCI host bridges (Bjorn Helgaas)

 - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for
   peer-to-peer DMA support (we don't have the peer-to-peer support yet;
   this is just one piece) (Logan Gunthorpe)

 - Clean up devm_of_pci_get_host_bridge_resources() resource allocation
   (Jan Kiszka)

 - Fixup resizable BARs after suspend/resume (Christian König)

 - Make "pci=earlydump" generic (Sinan Kaya)

 - Fix ROM BAR access routines to stay in bounds and check for signature
   correctly (Rex Zhu)

 - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer)

 - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe)

 - To avoid bus errors, enable PASID only if entire path supports
   End-End TLP prefixes (Sinan Kaya)

 - Unify slot and bus reset functions and remove hotplug knowledge from
   callers (Sinan Kaya)

 - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to
   fix guest reboot issues (Alex Williamson)

 - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD
   Controller (Bjorn Helgaas)

 - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt)

 - Remove Aardvark outbound window configuration (Evan Wang)

 - Fix Aardvark bridge window sizing issue (Zachary Zhang)

 - Convert Aardvark to use pci_host_probe() to reduce code duplication
   (Thomas Petazzoni)

 - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas)

 - Add Cadence support for optional generic PHYs (Alan Douglas)

 - Add Cadence power management ops (Alan Douglas)

 - Remove redundant variable from Cadence driver (Colin Ian King)

 - Add Kirin MSI support (Xiaowei Song)

 - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone,
   armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn
   Guo)

 - Move link notification settings from DesignWare core to individual
   drivers (Gustavo Pimentel)

 - Add endpoint library MSI-X interfaces (Gustavo Pimentel)

 - Correct signature of endpoint library IRQ interfaces (Gustavo
   Pimentel)

 - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel)

 - Add endpoint library MSI-X test support (Gustavo Pimentel)

 - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation
   (Jia-Ju Bai)

 - Add more devices to Broadcom PAXC quirk (Ray Jui)

 - Work around corrupted Broadcom PAXC config space to enable SMMU and
   GICv3 ITS (Ray Jui)

 - Disable MSI parsing to work around broken Broadcom PAXC logic in some
   devices (Ray Jui)

 - Hide unconfigured functions to work around a Broadcom PAXC defect
   (Ray Jui)

 - Lower iproc log level to reduce console output during boot (Ray Jui)

 - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi)

 - Fix mobiveil missing include file (Lorenzo Pieralisi)

 - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi)

 - Fix mvebu I/O space remapping issues (Thomas Petazzoni)

 - Use generic pci_host_bridge in mvebu instead of ARM-specific API
   (Thomas Petazzoni)

 - Whitelist VMD devices with fast interrupt handlers to avoid sharing
   vectors with slow handlers (Keith Busch)

* tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits)
  PCI/AER: Don't clear AER bits if error handling is Firmware-First
  PCI: Limit config space size for Netronome NFP5000
  PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips
  PCI/VPD: Check for VPD access completion before checking for timeout
  PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry
  PCI: Match Root Port's MPS to endpoint's MPSS as necessary
  PCI: Skip MPS logic for Virtual Functions (VFs)
  PCI: Add function 1 DMA alias quirk for Marvell 88SS9183
  PCI: Check for PCIe Link downtraining
  PCI: Add ACS Redirect disable quirk for Intel Sunrise Point
  PCI: Add device-specific ACS Redirect disable infrastructure
  PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE
  PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support
  PCI: Allow specifying devices using a base bus and path of devfns
  PCI: Make specifying PCI devices in kernel parameters reusable
  PCI: Hide ACS quirk declarations inside PCI core
  PCI: Delay after FLR of Intel DC P3700 NVMe
  PCI: Disable Samsung SM961/PM961 NVMe before FLR
  PCI: Export pcie_has_flr()
  PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers()
  ...

  - Mark fall-through switch cases before enabling -Wimplicit-fallthrough
    (Gustavo A. R. Silva)

  - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig)

  - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied
    (Heiner Kallweit)

  - Unify PCI and DMA direction #defines (Shunyong Yang)

  - Add PCI_DEVICE_DATA() macro (Andy Shevchenko)

  - Check for VPD completion before checking for timeout (Bert Kenward)

  - Limit Netronome NFP5000 config space size to work around erratum (Jakub
    Kicinski)

* pci/misc:
  PCI: Limit config space size for Netronome NFP5000
  PCI/VPD: Check for VPD access completion before checking for timeout
  PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry
  PCI: Unify PCI and normal DMA direction definitions
  PCI: Use IRQF_ONESHOT if pci_request_irq() called with no handler
  PCI: Call dma_debug_add_bus() for pci_bus_type from PCI core
  PCI: Mark fall-through switch cases before enabling -Wimplicit-fallthrough

# Conflicts:
#	drivers/pci/hotplug/pciehp_ctrl.c

Syzbot continues to try to create mac80211_hwsim radios, and
manages to pass parameters that are later checked with WARN_ON
in cfg80211 - catch another one in hwsim directly.

Reported-by: syzbot+2a12f11c306afe871c1f@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

There are a lot of examples in the kernel where PCI_VDEVICE() is used and
still looks not so convenient due to additional driver_data field attached.

Introduce PCI_DEVICE_DATA() macro to fully describe device ID entry in
shortest possible form. For example,

  before:

    { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD),
      (kernel_ulong_t) &dwc3_pci_mrfld_properties, },

  after:

    { PCI_DEVICE_DATA(INTEL, MRFLD, &dwc3_pci_mrfld_properties) },

Drivers can be converted later on in independent way.

While here, remove the unused macro with the same name from Ralink wireless
driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>	# for rt2x00

strncpy might not NUL-terminate the string, if the name equals the buffer size.
Use strlcpy instead.

Signed-off-by: Michael Buesch <m@bues.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>