Pull ARM DT updates from Olof Johansson:
 "As always, this tends to be one of our bigger branches.  There are
  lots of updates this release, but not that many jumps out as something
  that needs more detailed coverage.  Some of the highlights are:

   - DTs for the new Annapurna Labs Alpine platform

   - more graphics DT pieces falling into place on Exynos, bridges,
     clocks.

   - plenty of DT updates for Qualcomm platforms for various IP blocks

   - some churn on Tegra due to switch-over to tool-generated pinctrl
     data

   - misc fixes and updates for Atmel at91 platforms

   - various DT updates to add IP block support on Broadcom's Cygnus
     platforms

   - more updates for Renesas platforms as DT support is added for
     various IP blocks (IPMMU, display, audio, etc)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (231 commits)
  ARM: dts: alpine: add internal pci
  Revert "ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135."
  ARM: mvebu: use 0xf1000000 as internal registers on Armada 370 DB
  ARM: dts: qcom: Add idle state device nodes for 8064
  ARM: dts: qcom: Add idle states device nodes for 8084
  ARM: dts: qcom: Add idle states device nodes for 8974/8074
  ARM: dts: qcom: Update power-controller device node for 8064 Krait CPUs
  ARM: dts: qcom: Add power-controller device node for 8084 Krait CPUs
  ARM: dts: qcom: Add power-controller device node for 8074 Krait CPUs
  devicetree: bindings: Document qcom,idle-states
  devicetree: bindings: Update qcom,saw2 node bindings
  dt-bindings: Add #defines for MSM8916 clocks and resets
  arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device tree
  arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodes
  arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodes
  arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974
  arm: dts: qcom: Add LCC nodes
  arm: dts: qcom: Add TCSR support for MSM8960
  arm: dts: qcom: Add TCSR support for MSM8660
  arm: dts: qcom: Add TCSR support for IPQ8064
  ...

Pull networking updates from David Miller:

 1) Add BQL support to via-rhine, from Tino Reichardt.

 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers
    can support hw switch offloading.  From Floria Fainelli.

 3) Allow 'ip address' commands to initiate multicast group join/leave,
    from Madhu Challa.

 4) Many ipv4 FIB lookup optimizations from Alexander Duyck.

 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel
    Borkmann.

 6) Remove the ugly compat support in ARP for ugly layers like ax25,
    rose, etc.  And use this to clean up the neigh layer, then use it to
    implement MPLS support.  All from Eric Biederman.

 7) Support L3 forwarding offloading in switches, from Scott Feldman.

 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed
    up route lookups even further.  From Alexander Duyck.

 9) Many improvements and bug fixes to the rhashtable implementation,
    from Herbert Xu and Thomas Graf.  In particular, in the case where
    an rhashtable user bulk adds a large number of items into an empty
    table, we expand the table much more sanely.

10) Don't make the tcp_metrics hash table per-namespace, from Eric
    Biederman.

11) Extend EBPF to access SKB fields, from Alexei Starovoitov.

12) Split out new connection request sockets so that they can be
    established in the main hash table.  Much less false sharing since
    hash lookups go direct to the request sockets instead of having to
    go first to the listener then to the request socks hashed
    underneath.  From Eric Dumazet.

13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk.

14) Support stable privacy address generation for RFC7217 in IPV6.  From
    Hannes Frederic Sowa.

15) Hash network namespace into IP frag IDs, also from Hannes Frederic
    Sowa.

16) Convert PTP get/set methods to use 64-bit time, from Richard
    Cochran.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits)
  fm10k: Bump driver version to 0.15.2
  fm10k: corrected VF multicast update
  fm10k: mbx_update_max_size does not drop all oversized messages
  fm10k: reset head instead of calling update_max_size
  fm10k: renamed mbx_tx_dropped to mbx_tx_oversized
  fm10k: update xcast mode before synchronizing multicast addresses
  fm10k: start service timer on probe
  fm10k: fix function header comment
  fm10k: comment next_vf_mbx flow
  fm10k: don't handle mailbox events in iov_event path and always process mailbox
  fm10k: use separate workqueue for fm10k driver
  fm10k: Set PF queues to unlimited bandwidth during virtualization
  fm10k: expose tx_timeout_count as an ethtool stat
  fm10k: only increment tx_timeout_count in Tx hang path
  fm10k: remove extraneous "Reset interface" message
  fm10k: separate PF only stats so that VF does not display them
  fm10k: use hw->mac.max_queues for stats
  fm10k: only show actual queues, not the maximum in hardware
  fm10k: allow creation of VLAN on default vid
  fm10k: fix unused warnings
  ...

Pull tracing updates from Steven Rostedt:
 "Some clean ups and small fixes, but the biggest change is the addition
  of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints.

  Tracepoints have helper functions for the TP_printk() called
  __print_symbolic() and __print_flags() that lets a numeric number be
  displayed as a a human comprehensible text.  What is placed in the
  TP_printk() is also shown in the tracepoint format file such that user
  space tools like perf and trace-cmd can parse the binary data and
  express the values too.  Unfortunately, the way the TRACE_EVENT()
  macro works, anything placed in the TP_printk() will be shown pretty
  much exactly as is.  The problem arises when enums are used.  That's
  because unlike macros, enums will not be changed into their values by
  the C pre-processor.  Thus, the enum string is exported to the format
  file, and this makes it useless for user space tools.

  The TRACE_DEFINE_ENUM() solves this by converting the enum strings in
  the TP_printk() format into their number, and that is what is shown to
  user space.  For example, the tracepoint tlb_flush currently has this
  in its format file:

     __print_symbolic(REC->reason,
        { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
        { TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
        { TLB_LOCAL_SHOOTDOWN, "local shootdown" },
        { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })

  After adding:

     TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
     TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
     TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
     TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);

  Its format file will contain this:

     __print_symbolic(REC->reason,
        { 0, "flush on task switch" },
        { 1, "remote shootdown" },
        { 2, "local shootdown" },
        { 3, "local mm shootdown" })"

* tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
  tracing: Add enum_map file to show enums that have been mapped
  writeback: Export enums used by tracepoint to user space
  v4l: Export enums used by tracepoints to user space
  SUNRPC: Export enums in tracepoints to user space
  mm: tracing: Export enums in tracepoints to user space
  irq/tracing: Export enums in tracepoints to user space
  f2fs: Export the enums in the tracepoints to userspace
  net/9p/tracing: Export enums in tracepoints to userspace
  x86/tlb/trace: Export enums in used by tlb_flush tracepoint
  tracing/samples: Update the trace-event-sample.h with TRACE_DEFINE_ENUM()
  tracing: Allow for modules to convert their enums to values
  tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values
  tracing: Update trace-event-sample with TRACE_SYSTEM_VAR documentation
  tracing: Give system name a pointer
  brcmsmac: Move each system tracepoints to their own header
  iwlwifi: Move each system tracepoints to their own header
  mac80211: Move message tracepoints to their own header
  tracing: Add TRACE_SYSTEM_VAR to xhci-hcd
  tracing: Add TRACE_SYSTEM_VAR to kvm-s390
  tracing: Add TRACE_SYSTEM_VAR to intel-sst
  ...

Pull trivial tree from Jiri Kosina:
 "Usual trivial tree updates.  Nothing outstanding -- mostly printk()
  and comment fixes and unused identifier removals"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  goldfish: goldfish_tty_probe() is not using 'i' any more
  powerpc: Fix comment in smu.h
  qla2xxx: Fix printks in ql_log message
  lib: correct link to the original source for div64_u64
  si2168, tda10071, m88ds3103: Fix firmware wording
  usb: storage: Fix printk in isd200_log_config()
  qla2xxx: Fix printk in qla25xx_setup_mode
  init/main: fix reset_device comment
  ipwireless: missing assignment
  goldfish: remove unreachable line of code
  coredump: Fix do_coredump() comment
  stacktrace.h: remove duplicate declaration task_struct
  smpboot.h: Remove unused function prototype
  treewide: Fix typo in printk messages
  treewide: Fix typo in printk messages
  mod_devicetable: fix comment for match_flags

Every tracing file must have its own TRACE_SYSTEM defined.
The brcmsmac tracepoint header broke this and added in the middle
of the file:

 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM brcmsmac

 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM brcmsmac_tx

 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM brcmsmac_msg

Unfortunately, this broke new code in the ftrace infrastructure.
Moving each of these TRACE_SYSTEMs into their own trace file with
just one TRACE_SYSTEM per file fixes the issue.

Link: http://lkml.kernel.org/r/5524D99C.1050902@broadcom.com

Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Every tracing file must have its own TRACE_SYSTEM defined.
The iwlwifi tracepoint header broke this and added in the middle
of the file:

 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM iwlwifi_io

 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM iwlwifi_ucode

 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM iwlwifi_msg

 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM iwlwifi_data

 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM iwlwifi

Unfortunately, this broke new code in the ftrace infrastructure.
Moving each of these TRACE_SYSTEMs into their own trace file with
just one TRACE_SYSTEM per file fixes the issue.

Link: http://lkml.kernel.org/r/1428479094.2809.3.camel@sipsolutions.net

Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

ar9550 or later chips, the AR_GPIO_IN_OUT register only can
control GPIO[0:3]. For the extra GPIO, use standard GPIO calls
instead of WMAC internal registers.

Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

This patch fix a spelling typo in MODULE_DESCRIPTION in
wl1251/main.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Use bool constants as the return values instead of 1 and 0.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

rtl8192cu can't connect to AP after physical reconnect.
according to dmesg, that problem's cause was DHCP timeout.

rtl_is_special_data function checks packet type for adjusting rate.
when that function is called from _rtl_rc_get_highest_rix, it can not
calculate offset correctly. so i add argument is_encn in rtl_is_special_data.
is_enc variable mean that iv header is added in skb parameter.

i test only rtl8192cu chipset. because i doesn't have other rtlwifi chipsets.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>