<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/drivers/net/wireless, branch v3.4-rc3</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>rtlwifi: Add missing DMA buffer unmapping for PCI drivers</title>
<updated>2012-04-11T19:01:45+00:00</updated>
<author>
<name>Larry Finger</name>
<email>Larry.Finger@lwfinger.net</email>
</author>
<published>2012-03-26T15:48:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=673f7786e205c87b5d978c62827b9a66d097bebb'/>
<id>673f7786e205c87b5d978c62827b9a66d097bebb</id>
<content type='text'>
In https://bugzilla.kernel.org/show_bug.cgi?id=42976, a system with driver
rtl8192se used as an AP suffers from "Out of SW-IOMMU space" errors. These
are caused by the DMA buffers used for beacons never being unmapped.

This bug was also reported at
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/961618

Reported-and-Tested-by: Da Xue &lt;da@lessconfused.com&gt;
Signed-off-by: Larry Finger &lt;Larry.Finger@lwfinger.net&gt;
Cc: Stable &lt;stable@vger.kernel.org&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
In https://bugzilla.kernel.org/show_bug.cgi?id=42976, a system with driver
rtl8192se used as an AP suffers from "Out of SW-IOMMU space" errors. These
are caused by the DMA buffers used for beacons never being unmapped.

This bug was also reported at
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/961618

Reported-and-Tested-by: Da Xue &lt;da@lessconfused.com&gt;
Signed-off-by: Larry Finger &lt;Larry.Finger@lwfinger.net&gt;
Cc: Stable &lt;stable@vger.kernel.org&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rtlwifi: Preallocate USB read buffers and eliminate kalloc in read routine</title>
<updated>2012-04-11T19:01:44+00:00</updated>
<author>
<name>Larry Finger</name>
<email>Larry.Finger@lwfinger.net</email>
</author>
<published>2012-03-19T20:44:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=a7959c1394d4126a70a53b914ce4105f5173d0aa'/>
<id>a7959c1394d4126a70a53b914ce4105f5173d0aa</id>
<content type='text'>
The current version of rtlwifi for USB operations uses kmalloc to
acquire a 32-bit buffer for each read of the device. When
_usb_read_sync() is called with the rcu_lock held, the result is
a "sleeping function called from invalid context" BUG. This is
reported for two cases in https://bugzilla.kernel.org/show_bug.cgi?id=42775.
The first case has the lock originating from within rtlwifi and could
be fixed by rearranging the locking; however, the second originates from
within mac80211. The kmalloc() call is removed from _usb_read_sync()
by creating a ring buffer pointer in the private area and
allocating the buffer data in the probe routine.

Signed-off-by: Larry Finger &lt;Larry.Finger@lwfinger.net&gt;
Cc: Stable &lt;stable@vger.kernel.org&gt; [This version good for 3.3+ - different patch for 3.2 - 2.6.39]
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The current version of rtlwifi for USB operations uses kmalloc to
acquire a 32-bit buffer for each read of the device. When
_usb_read_sync() is called with the rcu_lock held, the result is
a "sleeping function called from invalid context" BUG. This is
reported for two cases in https://bugzilla.kernel.org/show_bug.cgi?id=42775.
The first case has the lock originating from within rtlwifi and could
be fixed by rearranging the locking; however, the second originates from
within mac80211. The kmalloc() call is removed from _usb_read_sync()
by creating a ring buffer pointer in the private area and
allocating the buffer data in the probe routine.

Signed-off-by: Larry Finger &lt;Larry.Finger@lwfinger.net&gt;
Cc: Stable &lt;stable@vger.kernel.org&gt; [This version good for 3.3+ - different patch for 3.2 - 2.6.39]
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Revert "ath9k: fix going to full-sleep on PS idle"</title>
<updated>2012-04-10T18:14:34+00:00</updated>
<author>
<name>Sujith Manoharan</name>
<email>c_manoha@qca.qualcomm.com</email>
</author>
<published>2012-04-10T06:56:11+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=011afa1ed8c408d694957d2474d89dc81a60b70c'/>
<id>011afa1ed8c408d694957d2474d89dc81a60b70c</id>
<content type='text'>
This reverts commit c1afdaff90538ef085b756454f12b29575411214.

Users have reported connection failures in 3.3.1 and suspend/resume
failures in 3.4-rcX. Revert this commit for now - PS IDLE can be
fixed in a clean manner later on.

Cc: stable@vger.kernel.org
Signed-off-by: Sujith Manoharan &lt;c_manoha@qca.qualcomm.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This reverts commit c1afdaff90538ef085b756454f12b29575411214.

Users have reported connection failures in 3.3.1 and suspend/resume
failures in 3.4-rcX. Revert this commit for now - PS IDLE can be
fixed in a clean manner later on.

Cc: stable@vger.kernel.org
Signed-off-by: Sujith Manoharan &lt;c_manoha@qca.qualcomm.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rt2x00: Fix rfkill_polling register function.</title>
<updated>2012-04-10T18:14:28+00:00</updated>
<author>
<name>Chen, Chien-Chia</name>
<email>machen@suse.com</email>
</author>
<published>2012-03-29T10:21:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=e2bc7c5f3cb8756865aa0ab140d2288f61599dda'/>
<id>e2bc7c5f3cb8756865aa0ab140d2288f61599dda</id>
<content type='text'>
  Move rt2x00rfkill_register(rt2x00dev) to rt2x00lib_probe_dev
  function. It fixes of starting rfkill_poll function at the
  right time if sets hard rfkill block and reboot. rt2x00mac_rfkill_poll
  should be starting before bringing up the wireless interface.

Signed-off-by: Chen, Chien-Chia &lt;machen@suse.com&gt;
Acked-by: Helmut Schaa &lt;helmut.schaa@googlemail.com&gt;
CC: Kevin Chou &lt;kevin.chou@mediatek.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
  Move rt2x00rfkill_register(rt2x00dev) to rt2x00lib_probe_dev
  function. It fixes of starting rfkill_poll function at the
  right time if sets hard rfkill block and reboot. rt2x00mac_rfkill_poll
  should be starting before bringing up the wireless interface.

Signed-off-by: Chen, Chien-Chia &lt;machen@suse.com&gt;
Acked-by: Helmut Schaa &lt;helmut.schaa@googlemail.com&gt;
CC: Kevin Chou &lt;kevin.chou@mediatek.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rtlwifi: Fix oops on rate-control failure</title>
<updated>2012-04-09T19:54:49+00:00</updated>
<author>
<name>Larry Finger</name>
<email>Larry.Finger@lwfinger.net</email>
</author>
<published>2012-04-06T21:54:17+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=e89f7690a3adbde0af7c294f83c242ba6a367ef0'/>
<id>e89f7690a3adbde0af7c294f83c242ba6a367ef0</id>
<content type='text'>
When the rate-control indexing is incorrectly set up, mac80211 issues
a warning and returns NULL from the call to ieee80211_get_tx_rate().
When this happens, avoid a NULL pointer dereference.

Signed-off-by: Larry Finger &lt;Larry.Finger@lwfinger.net&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
When the rate-control indexing is incorrectly set up, mac80211 issues
a warning and returns NULL from the call to ieee80211_get_tx_rate().
When this happens, avoid a NULL pointer dereference.

Signed-off-by: Larry Finger &lt;Larry.Finger@lwfinger.net&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rtlwifi: rtl8192de: Fix firmware initialization</title>
<updated>2012-04-09T19:54:47+00:00</updated>
<author>
<name>Larry Finger</name>
<email>Larry.Finger@lwfinger.net</email>
</author>
<published>2012-04-03T20:31:41+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=0298dc9f2273fb2d596ae10d7700f054bfce601d'/>
<id>0298dc9f2273fb2d596ae10d7700f054bfce601d</id>
<content type='text'>
Before the switch to asynchronous firmware loading (mainline commit b0302ab),
it was necessary to load firmware when initializing the first of the units
in a dual-mac system. After the change, it is necessary to load firmware in
both units.

Signed-off-by: Larry Finger &lt;Larry.Finger@lwfinger.net&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Before the switch to asynchronous firmware loading (mainline commit b0302ab),
it was necessary to load firmware when initializing the first of the units
in a dual-mac system. After the change, it is necessary to load firmware in
both units.

Signed-off-by: Larry Finger &lt;Larry.Finger@lwfinger.net&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'akpm' (Andrew's patch-bomb)</title>
<updated>2012-04-05T22:30:34+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2012-04-05T22:30:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=5d32c88f0b94061b3af2e3ade92422407282eb12'/>
<id>5d32c88f0b94061b3af2e3ade92422407282eb12</id>
<content type='text'>
Merge batch of fixes from Andrew Morton:
 "The simple_open() cleanup was held back while I wanted for laggards to
  merge things.

  I still need to send a few checkpoint/restore patches.  I've been
  wobbly about merging them because I'm wobbly about the overall
  prospects for success of the project.  But after speaking with Pavel
  at the LSF conference, it sounds like they're further toward
  completion than I feared - apparently davem is at the "has stopped
  complaining" stage regarding the net changes.  So I need to go back
  and re-review those patchs and their (lengthy) discussion."

* emailed from Andrew Morton &lt;akpm@linux-foundation.org&gt;: (16 patches)
  memcg swap: use mem_cgroup_uncharge_swap fix
  backlight: add driver for DA9052/53 PMIC v1
  C6X: use set_current_blocked() and block_sigmask()
  MAINTAINERS: add entry for sparse checker
  MAINTAINERS: fix REMOTEPROC F: typo
  alpha: use set_current_blocked() and block_sigmask()
  simple_open: automatically convert to simple_open()
  scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open()
  libfs: add simple_open()
  hugetlbfs: remove unregister_filesystem() when initializing module
  drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback
  fs/xattr.c:setxattr(): improve handling of allocation failures
  fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed
  fs/xattr.c: suppress page allocation failure warnings from sys_listxattr()
  sysrq: use SEND_SIG_FORCED instead of force_sig()
  proc: fix mount -t proc -o AAA
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Merge batch of fixes from Andrew Morton:
 "The simple_open() cleanup was held back while I wanted for laggards to
  merge things.

  I still need to send a few checkpoint/restore patches.  I've been
  wobbly about merging them because I'm wobbly about the overall
  prospects for success of the project.  But after speaking with Pavel
  at the LSF conference, it sounds like they're further toward
  completion than I feared - apparently davem is at the "has stopped
  complaining" stage regarding the net changes.  So I need to go back
  and re-review those patchs and their (lengthy) discussion."

* emailed from Andrew Morton &lt;akpm@linux-foundation.org&gt;: (16 patches)
  memcg swap: use mem_cgroup_uncharge_swap fix
  backlight: add driver for DA9052/53 PMIC v1
  C6X: use set_current_blocked() and block_sigmask()
  MAINTAINERS: add entry for sparse checker
  MAINTAINERS: fix REMOTEPROC F: typo
  alpha: use set_current_blocked() and block_sigmask()
  simple_open: automatically convert to simple_open()
  scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open()
  libfs: add simple_open()
  hugetlbfs: remove unregister_filesystem() when initializing module
  drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback
  fs/xattr.c:setxattr(): improve handling of allocation failures
  fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed
  fs/xattr.c: suppress page allocation failure warnings from sys_listxattr()
  sysrq: use SEND_SIG_FORCED instead of force_sig()
  proc: fix mount -t proc -o AAA
</pre>
</div>
</content>
</entry>
<entry>
<title>simple_open: automatically convert to simple_open()</title>
<updated>2012-04-05T22:25:50+00:00</updated>
<author>
<name>Stephen Boyd</name>
<email>sboyd@codeaurora.org</email>
</author>
<published>2012-04-05T21:25:11+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=234e340582901211f40d8c732afc49f0630ecf05'/>
<id>234e340582901211f40d8c732afc49f0630ecf05</id>
<content type='text'>
Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op.  This leads to a
proliferation of the default_open() implementation across the entire
tree.

Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().

This replacement was done with the following semantic patch:

&lt;smpl&gt;
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i-&gt;i_private)
-f-&gt;private_data = i-&gt;i_private;
|
-f-&gt;private_data = i-&gt;i_private;
)
-return 0;
-}

@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
&lt;/smpl&gt;

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Stephen Boyd &lt;sboyd@codeaurora.org&gt;
Cc: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Cc: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
Cc: Julia Lawall &lt;Julia.Lawall@lip6.fr&gt;
Acked-by: Ingo Molnar &lt;mingo@elte.hu&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op.  This leads to a
proliferation of the default_open() implementation across the entire
tree.

Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().

This replacement was done with the following semantic patch:

&lt;smpl&gt;
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i-&gt;i_private)
-f-&gt;private_data = i-&gt;i_private;
|
-f-&gt;private_data = i-&gt;i_private;
)
-return 0;
-}

@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
&lt;/smpl&gt;

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Stephen Boyd &lt;sboyd@codeaurora.org&gt;
Cc: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Cc: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
Cc: Julia Lawall &lt;Julia.Lawall@lip6.fr&gt;
Acked-by: Ingo Molnar &lt;mingo@elte.hu&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net</title>
<updated>2012-04-03T00:53:39+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2012-04-03T00:53:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=ed359a3b7b6ade0071f378c0cf4392d252f7d334'/>
<id>ed359a3b7b6ade0071f378c0cf4392d252f7d334</id>
<content type='text'>
Pull networking fixes from David Miller:

 1) Provide device string properly for USB i2400m wimax devices, also
    don't OOPS when providing firmware string.  From Phil Sutter.

 2) Add support for sh_eth SH7734 chips, from Nobuhiro Iwamatsu.

 3) Add another device ID to USB zaurus driver, from Guan Xin.

 4) Loop index start in pool vector iterator is wrong causing MAC to not
    get configured in bnx2x driver, fix from Dmitry Kravkov.

 5) EQL driver assumes HZ=100, fix from Eric Dumazet.

 6) Now that skb_add_rx_frag() can specify the truesize increment
    separately, do so in f_phonet and cdc_phonet, also from Eric
    Dumazet.

 7) virtio_net accidently uses net_ratelimit() not only on the kernel
    warning but also the statistic bump, fix from Rick Jones.

 8) ip_route_input_mc() uses fixed init_net namespace, oops, use
    dev_net(dev) instead.  Fix from Benjamin LaHaise.

 9) dev_forward_skb() needs to clear the incoming interface index of the
    SKB so that it looks like a new incoming packet, also from Benjamin
    LaHaise.

10) iwlwifi mistakenly initializes a channel entry as 2GHZ instead of
    5GHZ, fix from Stanislav Yakovlev.

11) Missing kmalloc() return value checks in orinoco, from Santosh
    Nayak.

12) ath9k doesn't check for HT capabilities in the right way, it is
    checking ht_supported instead of the ATH9K_HW_CAP_HT flag.  Fix from
    Sujith Manoharan.

13) Fix x86 BPF JIT emission of 16-bit immediate field of AND
    instructions, from Feiran Zhuang.

14) Avoid infinite loop in GARP code when registering sysfs entries.
    From David Ward.

15) rose protocol uses memcpy instead of memcmp in a device address
    comparison, oops.  Fix from Daniel Borkmann.

16) Fix build of lpc_eth due to dev_hw_addr_rancom() interface being
    renamed to eth_hw_addr_random().  From Roland Stigge.

17) Make ipv6 RTM_GETROUTE interpret RTA_IIF attribute the same way
    that ipv4 does.  Fix from Shmulik Ladkani.

18) via-rhine has an inverted bit test, causing suspend/resume
    regressions.  Fix from Andreas Mohr.

19) RIONET assumes 4K page size, fix from Akinobu Mita.

20) Initialization of imask register in sky2 is buggy, because bits are
    "or'd" into an uninitialized local variable.  Fix from Lino
    Sanfilippo.

21) Fix FCOE checksum offload handling, from Yi Zou.

22) Fix VLAN processing regression in e1000, from Jiri Pirko.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
  sky2: dont overwrite settings for PHY Quick link
  tg3: Fix 5717 serdes powerdown problem
  net: usb: cdc_eem: fix mtu
  net: sh_eth: fix endian check for architecture independent
  usb/rtl8150 : Remove duplicated definitions
  rionet: fix page allocation order of rionet_active
  via-rhine: fix wait-bit inversion.
  ipv6: Fix RTM_GETROUTE's interpretation of RTA_IIF to be consistent with ipv4
  net: lpc_eth: Fix rename of dev_hw_addr_random
  net/netfilter/nfnetlink_acct.c: use linux/atomic.h
  rose_dev: fix memcpy-bug in rose_set_mac_address
  Fix non TBI PHY access; a bad merge undid bug fix in a previous commit.
  net/garp: avoid infinite loop if attribute already exists
  x86 bpf_jit: fix a bug in emitting the 16-bit immediate operand of AND
  bonding: emit event when bonding changes MAC
  mac80211: fix oper channel timestamp updation
  ath9k: Use HW HT capabilites properly
  MAINTAINERS: adding maintainer for ipw2x00
  net: orinoco: add error handling for failed kmalloc().
  net/wireless: ipw2x00: fix a typo in wiphy struct initilization
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull networking fixes from David Miller:

 1) Provide device string properly for USB i2400m wimax devices, also
    don't OOPS when providing firmware string.  From Phil Sutter.

 2) Add support for sh_eth SH7734 chips, from Nobuhiro Iwamatsu.

 3) Add another device ID to USB zaurus driver, from Guan Xin.

 4) Loop index start in pool vector iterator is wrong causing MAC to not
    get configured in bnx2x driver, fix from Dmitry Kravkov.

 5) EQL driver assumes HZ=100, fix from Eric Dumazet.

 6) Now that skb_add_rx_frag() can specify the truesize increment
    separately, do so in f_phonet and cdc_phonet, also from Eric
    Dumazet.

 7) virtio_net accidently uses net_ratelimit() not only on the kernel
    warning but also the statistic bump, fix from Rick Jones.

 8) ip_route_input_mc() uses fixed init_net namespace, oops, use
    dev_net(dev) instead.  Fix from Benjamin LaHaise.

 9) dev_forward_skb() needs to clear the incoming interface index of the
    SKB so that it looks like a new incoming packet, also from Benjamin
    LaHaise.

10) iwlwifi mistakenly initializes a channel entry as 2GHZ instead of
    5GHZ, fix from Stanislav Yakovlev.

11) Missing kmalloc() return value checks in orinoco, from Santosh
    Nayak.

12) ath9k doesn't check for HT capabilities in the right way, it is
    checking ht_supported instead of the ATH9K_HW_CAP_HT flag.  Fix from
    Sujith Manoharan.

13) Fix x86 BPF JIT emission of 16-bit immediate field of AND
    instructions, from Feiran Zhuang.

14) Avoid infinite loop in GARP code when registering sysfs entries.
    From David Ward.

15) rose protocol uses memcpy instead of memcmp in a device address
    comparison, oops.  Fix from Daniel Borkmann.

16) Fix build of lpc_eth due to dev_hw_addr_rancom() interface being
    renamed to eth_hw_addr_random().  From Roland Stigge.

17) Make ipv6 RTM_GETROUTE interpret RTA_IIF attribute the same way
    that ipv4 does.  Fix from Shmulik Ladkani.

18) via-rhine has an inverted bit test, causing suspend/resume
    regressions.  Fix from Andreas Mohr.

19) RIONET assumes 4K page size, fix from Akinobu Mita.

20) Initialization of imask register in sky2 is buggy, because bits are
    "or'd" into an uninitialized local variable.  Fix from Lino
    Sanfilippo.

21) Fix FCOE checksum offload handling, from Yi Zou.

22) Fix VLAN processing regression in e1000, from Jiri Pirko.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
  sky2: dont overwrite settings for PHY Quick link
  tg3: Fix 5717 serdes powerdown problem
  net: usb: cdc_eem: fix mtu
  net: sh_eth: fix endian check for architecture independent
  usb/rtl8150 : Remove duplicated definitions
  rionet: fix page allocation order of rionet_active
  via-rhine: fix wait-bit inversion.
  ipv6: Fix RTM_GETROUTE's interpretation of RTA_IIF to be consistent with ipv4
  net: lpc_eth: Fix rename of dev_hw_addr_random
  net/netfilter/nfnetlink_acct.c: use linux/atomic.h
  rose_dev: fix memcpy-bug in rose_set_mac_address
  Fix non TBI PHY access; a bad merge undid bug fix in a previous commit.
  net/garp: avoid infinite loop if attribute already exists
  x86 bpf_jit: fix a bug in emitting the 16-bit immediate operand of AND
  bonding: emit event when bonding changes MAC
  mac80211: fix oper channel timestamp updation
  ath9k: Use HW HT capabilites properly
  MAINTAINERS: adding maintainer for ipw2x00
  net: orinoco: add error handling for failed kmalloc().
  net/wireless: ipw2x00: fix a typo in wiphy struct initilization
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless</title>
<updated>2012-04-01T20:47:08+00:00</updated>
<author>
<name>David S. Miller</name>
<email>davem@davemloft.net</email>
</author>
<published>2012-04-01T20:47:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=54f5ffbf308828b588b9d1acd9a512d433be8a09'/>
<id>54f5ffbf308828b588b9d1acd9a512d433be8a09</id>
<content type='text'>
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
</pre>
</div>
</content>
</entry>
</feed>
