linux.git/drivers/net/wireless, branch v3.0-rc7

ath5k: Add missing breaks in switch/case

2011-07-11T19:46:02+00:00

Signed-off-by: Joe Perches 
Acked-by: Pavel Roskin 
Signed-off-by: Linus Torvalds

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem

2011-06-30T15:26:04+00:00

ath5k: fix memory leak when fewer than N_PD_CURVES are in use

2011-06-29T18:36:45+00:00

We would free the proper number of curves, but in the wrong
slots, due to a missing level of indirection through
the pdgain_idx table.

It's simpler just to try to free all four slots, so do that.

Cc: stable@kernel.org
Signed-off-by: Bob Copeland 
Signed-off-by: John W. Linville

ath9k: Fix suspend/resume when no interface is UP

2011-06-29T18:36:44+00:00

When no interface has been brought up, the chip's power
state continued as AWAKE. So during resume, the chip never
been powered up.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan 
Signed-off-by: John W. Linville

iwlagn: use PCI_DMA_* for pci_* operations

2011-06-28T15:16:39+00:00

"iwlagn: map command buffers BIDI" uses the DMA_* enumerations for DMA
directions, even though the pci_* DMA API is still in use.  That patch
was undoubtedly developed on top of "iwlagn: don't use the PCI wrappers
for DMA operation", which is due in the next release.

Signed-off-by: John W. Linville

iwlagn: fix *_UCODE_API_MAX output in the firmware field

2011-06-27T18:33:14+00:00

Currently (3.0-rc2), modinfo iwlagn shows:
    firmware:       iwlwifi-5150-IWL5150_UCODE_API_MAX.ucode
    firmware:       iwlwifi-5000-IWL5000_UCODE_API_MAX.ucode
    firmware:       iwlwifi-6000g2b-IWL6000G2_UCODE_API_MAX.ucode
    firmware:       iwlwifi-6000g2a-IWL6000G2_UCODE_API_MAX.ucode
    firmware:       iwlwifi-6050-IWL6050_UCODE_API_MAX.ucode
    firmware:       iwlwifi-6000-IWL6000_UCODE_API_MAX.ucode
    firmware:       iwlwifi-100-IWL100_UCODE_API_MAX.ucode
    firmware:       iwlwifi-1000-IWL1000_UCODE_API_MAX.ucode
    firmware:       iwlwifi-105-IWL105_UCODE_API_MAX.ucode
    firmware:       iwlwifi-2030-IWL2030_UCODE_API_MAX.ucode
    firmware:       iwlwifi-2000-IWL2000_UCODE_API_MAX.ucode

which is obviously wrong, the user should not see the *_UCODE_API_MAX
macros but the actual ucode API versions here.

The problem are the
    #define *_MODULE_FIRMWARE(api) *_FW_PRE #api ".ucode"
which do not expand api correctly (because this is a macro itself).

Fixed by using __stringify() from linux/stringify.h.

Further information about macro stringification can be found here:
    http://gcc.gnu.org/onlinedocs/cpp/Stringification.html

Signed-off-by: Evgeni Golov 
Signed-off-by: Wey-Yi Guy 
Signed-off-by: John W. Linville

Merge branch 'wireless-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6

2011-06-27T18:26:04+00:00

iwlagn: map command buffers BIDI

2011-06-27T14:56:41+00:00

Evidently, the device sometimes wants to write back
to command buffers, even if I see no reason why it
should. Allow it to do that.

Tested-by: Andy Lutomirski 
Tested-by: Kyle McMartin 
Signed-off-by: Johannes Berg 
Signed-off-by: Wey-Yi Guy

iwlagn: fix cmd queue unmap

2011-06-27T14:50:45+00:00

When we stop the device while a command is in
flight that uses multiple TBs, we can leak the
DMA buffers for the second and higher TBs. Fix
this by using iwlagn_unmap_tfd() as we do when
we normally recover the entry.

Signed-off-by: Johannes Berg 
Signed-off-by: Wey-Yi Guy

iwlagn: fix change_interface for P2P types

2011-06-24T18:21:24+00:00

When an interface changes type to a P2P type,
iwlagn will erroneously set vif->type to the
P2P type and not the reduced/split type. Fix
this by keeping "newtype" in another variable
for the assignment to vif->type.

Cc: stable@kernel.org [2.6.38+]
Signed-off-by: Johannes Berg 
Signed-off-by: Wey-Yi Guy