linux.git/drivers/net/wireless, branch v2.6.17

[PATCH] bcm43xx: add DMA rx poll workaround to DMA4

2006-06-05T19:28:56+00:00

Also add the Poll RX DMA Memory workaround to the DMA4
(xmitstatus) path.

Signed-off-by: Michael Buesch 
Signed-off-by: John W. Linville

[PATCH] arlan: fix section mismatch warnings

2006-05-26T20:11:56+00:00

Fix section mismatch warnings:
WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to
.init.text:arlan_probe from .text between 'init_module' (at offset
0x3526) and 'cleanup_module'
WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to
.init.text:init_arlan_proc from .text between 'init_module' (at offset
0x3539) and 'cleanup_module'
WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to
.exit.text:cleanup_arlan_proc from .text between 'cleanup_module' (at
offset 0x356c) and 'arlan_diagnostic_info_string'

Signed-off-by: Randy Dunlap 
Signed-off-by: John W. Linville

[PATCH] wavelan: fix section mismatch

2006-05-26T20:11:56+00:00

Fix section mismatch warning:
WARNING: drivers/net/wireless/wavelan.o - Section mismatch: reference to
.init.text: from .text between 'init_module' (at offset 0x371e) and
'cleanup_module'

Signed-off-by: Randy Dunlap 
Signed-off-by: John W. Linville

[PATCH] orinoco: possible null pointer dereference in orinoco_rx_monitor()

2006-05-23T17:35:32+00:00

If the skb allocation fails, the current error path calls
dev_kfree_skb_irq() with a NULL argument.  Also, 'err' is not being used.

Coverity CID: 275.

Signed-off-by: Florin Malita 
Cc: "John W. Linville" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] bcm43xx: associate on 'ifconfig up'

2006-05-17T18:53:19+00:00

I still need this hack to work around the fact that softmac doesn't
attempt to associate when we bring the device up...

Signed-off-by: David Woodhouse 
Signed-off-by: John W. Linville

[PATCH] bcm43xx: Fix access to non-existent PHY registers

2006-05-05T20:55:23+00:00

Fix the conditions under which we poke at the APHY registers in
bcm43xx_phy_initg() to avoid a machine check on chips where they don't
exist.

Signed-off-by: David Woodhouse 
Signed-off-by: John W. Linville

[PATCH] bcm43xx: Fix array overrun in bcm43xx_geo_init

2006-05-05T20:55:23+00:00

The problem here is that the bcm34xx driver and the ieee80211
stack do not agree on what channels are possible for 802.11a.
The ieee80211 stack only wants channels between 34 and 165, while
the bcm43xx driver accepts anything from 0 to 200. I made the
bcm43xx driver comply with the ieee80211 stack expectations, by
using the proper constants.

Signed-off-by: Jean Delvare 

[mb]: Reduce stack usage by kzalloc-ing ieee80211_geo

Signed-off-by: Michael Buesch 
Signed-off-by: John W. Linville

[PATCH] bcm43xx: check for valid MAC address in SPROM

2006-05-05T20:55:23+00:00

Check for valid MAC address in SPROM fields instead of relying on
PHY type while setting the MAC address in the networking subsystem,
as some devices have multiple PHYs.

Signed-off-by: Stefano Brivio 
Signed-off-by: John W. Linville

[PATCH] bcm43xx: fix iwmode crash when down

2006-05-05T20:55:23+00:00

This fixes a crash when

	iwconfig ethX mode foo

is done before

	ifconfig ethX up

or after

	ifconfig ethX down

Signed-off-by: Michael Buesch 
Signed-off-by: John W. Linville

[PATCH] bcm43xx: make PIO mode usable

2006-04-24T19:20:24+00:00

This patch fixes PIO mode on the softmac bcm43xx
driver. (A dscape patch will follow).
It mainly fixes endianess issues.
This patch is tested on PowerPC32 and i386.

Signed-off-by: Michael Buesch 
Signed-off-by: John W. Linville