linux.git/drivers/net/wireless/rt2x00/rt2x00queue.h, branch v2.6.35

rt2x00: In debugfs frame dumping allow the TX descriptor to be part of the skb.

2010-05-12T20:50:52+00:00

Preparation for futher cleanups in the area of properly maintaining the skb
data without fiddling with the skb->data pointer.

Signed-off-by: Gertjan van Wingerde 
Acked-by: Ivo van Doorn 
Signed-off-by: John W. Linville

rt2x00: rt2800: use correct txop value in tx descriptor

2010-05-07T18:57:21+00:00

rt2800 devices use a different enumeration to specify what IFS values should
be used on frame transmission compared to the other rt2x00 devices. Hence,
create a new enum called txop that contains the valid values.

Furthermore use the appropriate txop values as found in the ralink drivers:
- TXOP_BACKOFF for management frames
- TXOP_SIFS for subsequent fragments in a burst
- TXOP_HTTXOP for all data frames

Signed-off-by: Helmut Schaa 
Acked-by: Ivo van Doorn 
Acked-by: Gertjan van Wingerde 
Signed-off-by: John W. Linville

rt2x00: Register frame length in TX entry descriptor instead of L2PAD.

2010-05-04T17:24:23+00:00

And use it consistently in the chipset drivers.
Preparation for further clean ups.

Signed-off-by: Gertjan van Wingerde 
Signed-off-by: John W. Linville

rt2x00: remove now unused noise field from struct rxdone_entry_desc

2010-05-03T18:51:46+00:00

Signed-off-by: John W. Linville 
Acked-by: Gertjan van Wingerde

rt2x00: Remove SKBDESC_L2_PADDED flag.

2009-12-21T23:56:32+00:00

With the improved L2 padding code, this flag is no longer necessary, as the
rt2x00queue_remove_l2pad is capable of detecting by itself if L2 padding is
applied.
For received frames the RX descriptor flag is still being checked.

Signed-off-by: Gertjan van Wingerde 
Acked-by: Ivo van Doorn 
Signed-off-by: John W. Linville

mac80211: request TX status where needed

2009-11-19T16:08:56+00:00

Right now all frames mac80211 hands to the driver
have the IEEE80211_TX_CTL_REQ_TX_STATUS flag set to
request TX status. This isn't really necessary, only
the injected frames need TX status (the latter for
hostapd) so move setting this flag.

The rate control algorithms also need TX status, but
they don't require it.

Also, rt2x00 uses that bit for its own purposes and
seems to require it being set for all frames, but
that can be fixed in rt2x00.

This doesn't really change anything for any drivers
but in the future drivers using hw-rate control may
opt to not report TX status for frames that don't
have the IEEE80211_TX_CTL_REQ_TX_STATUS flag set.

Signed-off-by: Johannes Berg 
Acked-by: Ivo van Doorn  [rt2x00 bits]
Signed-off-by: John W. Linville

rt2x00: Update copyright statements.

2009-11-11T22:09:17+00:00

As mentioned on the linux-wireless mailing list, the current copyright
statements in the rt2x00 are meaningless, as the rt2x00 project is
not even a formal legal entity. Therefore it is better to replace
the existing copyright statements with copyright statements for the
people that actually wrote the code.

Note: Updated to the best of my knowledge with respect to who
contributed considerable amounts of code.

Signed-off-by: Gertjan van Wingerde 
Acked-by: Ivo van Doorn 
CC: Bartlomiej Zolnierkiewicz 
Signed-off-by: John W. Linville

rt2x00: Add support for retry rates

2009-08-20T15:36:02+00:00

rt2800pci can handle different retry rates,
it will always step 1 rate down after a failed
transmission so creating the retry rate list
for mac80211 is quite simple.

Signed-off-by: Benoit PAPILLAULT 
Signed-off-by: Ivo van Doorn 
Signed-off-by: John W. Linville

rt2x00: Comment spellchecking

2009-07-24T19:05:26+00:00

Fix a bunch of spelling errors in the rt2x00 drivers

Signed-off-by: Luis Correia 
Signed-off-by: Ivo van Doorn 
Signed-off-by: John W. Linville

rt2x00: Implement support for 802.11n

2009-05-06T19:14:50+00:00

Extend rt2x00lib capabilities to support 802.11n,
it still lacks aggregation support, but that can
be added in the future.

Signed-off-by: Ivo van Doorn 
Signed-off-by: John W. Linville