linux.git/drivers/net/wireless/mediatek, branch v6.5 Linux kernel source tree wifi: mt76: mt7615: do not advertise 5 GHz on first phy of MT7615D (DBDC) 2023-07-24T13:32:14+00:00 Paul Fertser fercerpav@gmail.com 2023-06-05T07:34:07+00:00 421033deb91521aa6a9255e495cb106741a52275 On DBDC devices the first (internal) phy is only capable of using 2.4 GHz band, and the 5 GHz band is exposed via a separate phy object, so avoid the false advertising. Reported-by: Rani Hod <rani.hod@gmail.com> Closes: https://github.com/openwrt/openwrt/pull/12361 Fixes: 7660a1bd0c22 ("mt76: mt7615: register ext_phy if DBDC is detected") Cc: stable@vger.kernel.org Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230605073408.8699-1-fercerpav@gmail.com 
On DBDC devices the first (internal) phy is only capable of using
2.4 GHz band, and the 5 GHz band is exposed via a separate phy object,
so avoid the false advertising.

Reported-by: Rani Hod <rani.hod@gmail.com>
Closes: https://github.com/openwrt/openwrt/pull/12361
Fixes: 7660a1bd0c22 ("mt76: mt7615: register ext_phy if DBDC is detected")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230605073408.8699-1-fercerpav@gmail.com
wifi: mt76: mt7921e: fix init command fail with enabled device 2023-07-07T02:10:41+00:00 Quan Zhou quan.zhou@mediatek.com 2023-07-05T15:26:38+00:00 525c469e5de9bf7e53574396196e80fc716ac9eb For some cases as below, we may encounter the unpreditable chip stats in driver probe() * The system reboot flow do not work properly, such as kernel oops while rebooting, and then the driver do not go back to default status at this moment. * Similar to the flow above. If the device was enabled in BIOS or UEFI, the system may switch to Linux without driver fully shutdown. To avoid the problem, force push the device back to default in probe() * mt7921e_mcu_fw_pmctrl() : return control privilege to chip side. * mt7921_wfsys_reset() : cleanup chip config before resource init. Error log [59007.600714] mt7921e 0000:02:00.0: ASIC revision: 79220010 [59010.889773] mt7921e 0000:02:00.0: Message 00000010 (seq 1) timeout [59010.889786] mt7921e 0000:02:00.0: Failed to get patch semaphore [59014.217839] mt7921e 0000:02:00.0: Message 00000010 (seq 2) timeout [59014.217852] mt7921e 0000:02:00.0: Failed to get patch semaphore [59017.545880] mt7921e 0000:02:00.0: Message 00000010 (seq 3) timeout [59017.545893] mt7921e 0000:02:00.0: Failed to get patch semaphore [59020.874086] mt7921e 0000:02:00.0: Message 00000010 (seq 4) timeout [59020.874099] mt7921e 0000:02:00.0: Failed to get patch semaphore [59024.202019] mt7921e 0000:02:00.0: Message 00000010 (seq 5) timeout [59024.202033] mt7921e 0000:02:00.0: Failed to get patch semaphore [59027.530082] mt7921e 0000:02:00.0: Message 00000010 (seq 6) timeout [59027.530096] mt7921e 0000:02:00.0: Failed to get patch semaphore [59030.857888] mt7921e 0000:02:00.0: Message 00000010 (seq 7) timeout [59030.857904] mt7921e 0000:02:00.0: Failed to get patch semaphore [59034.185946] mt7921e 0000:02:00.0: Message 00000010 (seq 8) timeout [59034.185961] mt7921e 0000:02:00.0: Failed to get patch semaphore [59037.514249] mt7921e 0000:02:00.0: Message 00000010 (seq 9) timeout [59037.514262] mt7921e 0000:02:00.0: Failed to get patch semaphore [59040.842362] mt7921e 0000:02:00.0: Message 00000010 (seq 10) timeout [59040.842375] mt7921e 0000:02:00.0: Failed to get patch semaphore [59040.923845] mt7921e 0000:02:00.0: hardware init failed Cc: stable@vger.kernel.org Fixes: 5c14a5f944b9 ("mt76: mt7921: introduce mt7921e support") Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Juan Martinez <juan.martinez@amd.com> Co-developed-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Message-ID: <39fcb7cee08d4ab940d38d82f21897483212483f.1688569385.git.deren.wu@mediatek.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
For some cases as below, we may encounter the unpreditable chip stats
in driver probe()
* The system reboot flow do not work properly, such as kernel oops while
  rebooting, and then the driver do not go back to default status at
  this moment.
* Similar to the flow above. If the device was enabled in BIOS or UEFI,
  the system may switch to Linux without driver fully shutdown.

To avoid the problem, force push the device back to default in probe()
* mt7921e_mcu_fw_pmctrl() : return control privilege to chip side.
* mt7921_wfsys_reset()    : cleanup chip config before resource init.

Error log
[59007.600714] mt7921e 0000:02:00.0: ASIC revision: 79220010
[59010.889773] mt7921e 0000:02:00.0: Message 00000010 (seq 1) timeout
[59010.889786] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59014.217839] mt7921e 0000:02:00.0: Message 00000010 (seq 2) timeout
[59014.217852] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59017.545880] mt7921e 0000:02:00.0: Message 00000010 (seq 3) timeout
[59017.545893] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59020.874086] mt7921e 0000:02:00.0: Message 00000010 (seq 4) timeout
[59020.874099] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59024.202019] mt7921e 0000:02:00.0: Message 00000010 (seq 5) timeout
[59024.202033] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59027.530082] mt7921e 0000:02:00.0: Message 00000010 (seq 6) timeout
[59027.530096] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59030.857888] mt7921e 0000:02:00.0: Message 00000010 (seq 7) timeout
[59030.857904] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59034.185946] mt7921e 0000:02:00.0: Message 00000010 (seq 8) timeout
[59034.185961] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59037.514249] mt7921e 0000:02:00.0: Message 00000010 (seq 9) timeout
[59037.514262] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59040.842362] mt7921e 0000:02:00.0: Message 00000010 (seq 10) timeout
[59040.842375] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59040.923845] mt7921e 0000:02:00.0: hardware init failed

Cc: stable@vger.kernel.org
Fixes: 5c14a5f944b9 ("mt76: mt7921: introduce mt7921e support")
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Juan Martinez <juan.martinez@amd.com>
Co-developed-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Message-ID: <39fcb7cee08d4ab940d38d82f21897483212483f.1688569385.git.deren.wu@mediatek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wifi: mt7601u: replace strlcpy() with strscpy() 2023-06-15T07:46:41+00:00 Azeem Shaikh azeemshaikh38@gmail.com 2023-06-13T00:34:57+00:00 7edbd53a58a86c1d389e474a4f318cf2fdffa5ce strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). Direct replacement is safe here since DEV_ASSIGN is only used by TRACE macros and the return values are ignored. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230613003458.3538812-1-azeemshaikh38@gmail.com 
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().

Direct replacement is safe here since DEV_ASSIGN is only used by
TRACE macros and the return values are ignored.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89

Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230613003458.3538812-1-azeemshaikh38@gmail.com
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2023-06-08T18:35:14+00:00 Jakub Kicinski kuba@kernel.org 2023-06-08T18:34:28+00:00 449f6bc17a51e68b06cfd742898e5ff3fe6e04d7 Cross-merge networking fixes after downstream PR. Conflicts: net/sched/sch_taprio.c d636fc5dd692 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping") dced11ef84fb ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()") net/ipv4/sysctl_net_ipv4.c e209fee4118f ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294") ccce324dabfe ("tcp: make the first N SYN RTO backoffs linear") https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Cross-merge networking fixes after downstream PR.

Conflicts:

net/sched/sch_taprio.c
  d636fc5dd692 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping")
  dced11ef84fb ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()")

net/ipv4/sysctl_net_ipv4.c
  e209fee4118f ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294")
  ccce324dabfe ("tcp: make the first N SYN RTO backoffs linear")
https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/

No adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wifi: mt76: mt7996: fix possible NULL pointer dereference in mt7996_mac_write_txwi() 2023-06-01T13:17:33+00:00 Lorenzo Bianconi lorenzo@kernel.org 2023-05-28T10:28:49+00:00 ead449023d3acb1424886d7b8cc672ed69bdd27e Fix possible NULL pointer dereference on mvif pointer in mt7996_mac_write_txwi routine. Fixes: 15ee62e73705 ("wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/2637628a84f42ad6d7b774e706f041d5b45c8cb5.1685269638.git.lorenzo@kernel.org 
Fix possible NULL pointer dereference on mvif pointer in
mt7996_mac_write_txwi routine.

Fixes: 15ee62e73705 ("wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/2637628a84f42ad6d7b774e706f041d5b45c8cb5.1685269638.git.lorenzo@kernel.org
wifi: mt76: mt7615: fix possible race in mt7615_mac_sta_poll 2023-05-27T08:17:17+00:00 Lorenzo Bianconi lorenzo@kernel.org 2023-05-24T14:39:32+00:00 30bc32c7c1f975cc3c14e1c7dc437266311282cf Grab sta_poll_lock spinlock in mt7615_mac_sta_poll routine in order to avoid possible races with mt7615_mac_add_txs() or mt7615_mac_fill_rx() removing msta pointer from sta_poll_list. Fixes: a621372a04ac ("mt76: mt7615: rework mt7615_mac_sta_poll for usb code") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/48b23404b759de4f1db2ef85975c72a4aeb1097c.1684938695.git.lorenzo@kernel.org 
Grab sta_poll_lock spinlock in mt7615_mac_sta_poll routine in order to
avoid possible races with mt7615_mac_add_txs() or mt7615_mac_fill_rx()
removing msta pointer from sta_poll_list.

Fixes: a621372a04ac ("mt76: mt7615: rework mt7615_mac_sta_poll for usb code")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/48b23404b759de4f1db2ef85975c72a4aeb1097c.1684938695.git.lorenzo@kernel.org
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2023-05-18T21:39:34+00:00 Jakub Kicinski kuba@kernel.org 2023-05-18T21:39:34+00:00 90223c1136b2930751116fb7de9675f55843f3ad Conflicts: drivers/net/ethernet/freescale/fec_main.c 6ead9c98cafc ("net: fec: remove the xdp_return_frame when lack of tx BDs") 144470c88c5d ("net: fec: using the standard return codes when xdp xmit errors") Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Conflicts:

drivers/net/ethernet/freescale/fec_main.c
  6ead9c98cafc ("net: fec: remove the xdp_return_frame when lack of tx BDs")
  144470c88c5d ("net: fec: using the standard return codes when xdp xmit errors")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wifi: mt76: connac: fix stats->tx_bytes calculation 2023-05-12T08:21:08+00:00 Ryder Lee ryder.lee@mediatek.com 2023-04-23T21:39:06+00:00 c7ab7a29ef5c0779574120d922256ce4651555d3 The stats->tx_bytes shall subtract retry byte from tx byte. Fixes: 43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/b3cd45596943cf5a06b2e08e2fe732ab0b51311b.1682285873.git.ryder.lee@mediatek.com 
The stats->tx_bytes shall subtract retry byte from tx byte.

Fixes: 43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/b3cd45596943cf5a06b2e08e2fe732ab0b51311b.1682285873.git.ryder.lee@mediatek.com
wifi: mt76: mt7996: fix endianness of MT_TXD6_TX_RATE 2023-05-12T08:21:07+00:00 Ryder Lee ryder.lee@mediatek.com 2023-04-23T21:39:05+00:00 cdc26ee89bddb9b6b2ae026a46d97855d5ba6694 To avoid sparse warning: sparse: warning: invalid assignment: |= sparse: left side has type restricted __le32 sparse: right side has type unsigned lon Fixes: 15ee62e73705 ("wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES support") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/16fa938373e3b145cb07a2c98d2428fea2abadba.1682285873.git.ryder.lee@mediatek.com 
To avoid sparse warning:
sparse: warning: invalid assignment: |=
sparse:    left side has type restricted __le32
sparse:    right side has type unsigned lon

Fixes: 15ee62e73705 ("wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES support")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/16fa938373e3b145cb07a2c98d2428fea2abadba.1682285873.git.ryder.lee@mediatek.com
wifi: mt7601u: delete dead code checking debugfs returns 2023-05-05T12:03:09+00:00 Wang Jikai wangjikai@hust.edu.cn 2023-04-21T09:22:00+00:00 f3dc7bb037d813ab7da84f488dd485f0fce66347 Smatch reports that: drivers/net/wireless/mediatek/mt7601u/debugfs.c:130 mt7601u_init_debugfs() warn: 'dir' is an error pointer or valid". Debugfs code is not supposed to need error checking so instead of changing this to if (IS_ERR()) the correct thing is to just delete the dead code. Signed-off-by: Wang Jikai <wangjikai@hust.edu.cn> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421092200.24456-1-wangjikai@hust.edu.cn 
Smatch reports that:
drivers/net/wireless/mediatek/mt7601u/debugfs.c:130
mt7601u_init_debugfs() warn: 'dir' is an error pointer or valid".

Debugfs code is not supposed to need error checking so instead of
changing this to if (IS_ERR()) the correct thing is to just delete
the dead code.

Signed-off-by: Wang Jikai <wangjikai@hust.edu.cn>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230421092200.24456-1-wangjikai@hust.edu.cn