linux.git/drivers/net/wireless/mediatek, branch v4.20

mt76: fix potential NULL pointer dereference in mt76_stop_tx_queues

2018-12-13T14:19:56+00:00

Starting from mac80211 commit adf8ed01e4fd ("mac80211: add an optional
TXQ for other PS-buffered frames") and commit 0eeb2b674f05 ("mac80211:
add an option for station management TXQ") a new per-sta queue has been
introduced for bufferable management frames.
sta->txq[IEEE80211_NUM_TIDS] is initialized just if the driver reports
the following hw flags:
- IEEE80211_HW_STA_MMPDU_TXQ
- IEEE80211_HW_BUFF_MMPDU_TXQ
This can produce a NULL pointer dereference in mt76_stop_tx_queues
since mt76 iterates on all available sta tx queues assuming they are
initialized by mac80211. This issue has been spotted analyzing the code
(it has not triggered any crash yet)

Signed-off-by: Lorenzo Bianconi 
Signed-off-by: Kalle Valo

mt76: fix uninitialized mutex access setting rts threshold

2018-11-16T13:15:49+00:00

Fix following crash due to a leftover uninitialized mutex access
in mt76x2_set_rts_threshold routine.

[   31.018059] Call Trace:
[   31.018341]  register_lock_class+0x51f/0x530
[   31.018828]  __lock_acquire+0x6c/0x1580
[   31.019247]  lock_acquire+0x88/0x120
[   31.021089]  __mutex_lock+0x4a/0x4f0
[   31.023343]  mt76x2_set_rts_threshold+0x28/0x50
[   31.023831]  ieee80211_set_wiphy_params+0x16d/0x4e0
[   31.024344]  nl80211_set_wiphy+0x72b/0xbc0
[   31.024781]  genl_family_rcv_msg+0x192/0x3a0
[   31.025233]  genl_rcv_msg+0x42/0x89
[   31.026079]  netlink_rcv_skb+0x38/0x100
[   31.026475]  genl_rcv+0x1f/0x30
[   31.026804]  netlink_unicast+0x19c/0x250
[   31.027212]  netlink_sendmsg+0x1ed/0x390
[   31.027615]  sock_sendmsg+0x31/0x40
[   31.027973]  ___sys_sendmsg+0x23c/0x280
[   31.030414]  __sys_sendmsg+0x42/0x80
[   31.030783]  do_syscall_64+0x4a/0x170
[   31.031160]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   31.031677] RIP: 0033:0x7f3498b39ba7
[   31.033953] RSP: 002b:00007fffe19675b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[   31.034883] RAX: ffffffffffffffda RBX: 00000000012d5350 RCX: 00007f3498b39ba7
[   31.035756] RDX: 0000000000000000 RSI: 00007fffe19675f0 RDI: 0000000000000003
[   31.036587] RBP: 00000000012da740 R08: 0000000000000002 R09: 0000000000000000
[   31.037422] R10: 0000000000000006 R11: 0000000000000246 R12: 00000000012da880
[   31.038252] R13: 00007fffe19675f0 R14: 00007fffe19678c0 R15: 00000000012da880

Fixes: 108a4861ef19 ("mt76: create new mt76x02-lib module for common mt76x{0,2} code")
Reported-by: lorenzo.trisolini@fluidmesh.com
Reported-by: luca.bisti@fluidmesh.com
Signed-off-by: Lorenzo Bianconi 
Signed-off-by: Kalle Valo

mt76: fix building without CONFIG_LEDS_CLASS

2018-11-06T16:46:33+00:00

When CONFIG_LEDS_CLASS is disabled, or it is a loadable module while
mt76 is built-in, we run into a link error:

drivers/net/wireless/mediatek/mt76/mac80211.o: In function `mt76_register_device':
mac80211.c:(.text+0xb78): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `devm_of_led_classdev_register'

We don't really need a hard dependency here as the driver can presumably
work just fine without LEDs, so this follows the iwlwifi example and
adds a separate Kconfig option for the LED support, this will be available
whenever it will link, and otherwise the respective code gets left out from
the driver object.

Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets")
Signed-off-by: Arnd Bergmann 
Signed-off-by: Lorenzo Bianconi 
Signed-off-by: Kalle Valo

mt76x0: phy: do not run calibration during channel switch

2018-10-13T15:39:53+00:00

Do not perform phy/vga calibration during channel switch.
Moreover remove mt76x0_agc_save and mt76x0_agc_restore routines
since they are no longer necessary. Furthermore run mt76_set_channel
in order to check if there are pending frames during channel switch

Signed-off-by: Lorenzo Bianconi 
Signed-off-by: Felix Fietkau

mt76x0: phy: align channel gain logic to mt76x2 one

2018-10-13T15:39:52+00:00

Update vga tuning algorithm to the one used in mt76x2 driver

Signed-off-by: Lorenzo Bianconi 
Signed-off-by: Felix Fietkau

mt76: introduce mt76x02_init_agc_gain routine

2018-10-13T15:39:50+00:00

Add mt76x02_init_agc_gain routine in mt76x02-lib moudule in
order to be reused by mt76x0 for vga initalization

Signed-off-by: Lorenzo Bianconi 
Signed-off-by: Felix Fietkau

mt76: move mt76x02_phy_adjust_vga_gain in mt76/mt76x02_phy.c

2018-10-13T15:39:49+00:00

Move mt76x02_phy_adjust_vga_gain routine in mt76x02-lib module
in order to be reused by mt76x0 driver for vga calibration

Signed-off-by: Lorenzo Bianconi 
Signed-off-by: Felix Fietkau

mt76: move rssi_gain_thresh routines in mt76x02-lib module

2018-10-13T15:39:48+00:00

Move mt76x2_get_rssi_gain_thresh and mt76x2_get_low_rssi_gain_thresh
routines in mt76x02-lib module in order to be reused by mt76x0 driver
for dynamic vga calibration

Signed-off-by: Lorenzo Bianconi 
Signed-off-by: Felix Fietkau

mt76x0: phy: add phy/vco temperature compensation

2018-10-13T15:39:47+00:00

Introduce phy/vco temperature calibration.
Moreover fix configuration of register 67 on bank0
during temperature reading and use mt76_poll utility routine
to poll core34 register.
Furthermore temperature compensation needs to be disabled
if the device supports tssi compensation.
This issue has never been hit since temperature reading is not
actually used by usb code.

Fixes: 10de7a8b4ab9 ("mt76x0: phy files")
Signed-off-by: Lorenzo Bianconi 
Signed-off-by: Felix Fietkau

mt76x0: eeprom: introduce mt76x0_tssi_enabled routine

2018-10-13T15:39:46+00:00

Add mt76x0_tssi_enabled in order to check if tssi compensation
is enabled since mt76x0 condition differs from mt76x2 one.
Moreover move back mt76x02_temp_tx_alc_enabled and mt76x02_tssi_enabled
routines in mt76x2/eeprom.h since they are mt76x2 specific

Signed-off-by: Lorenzo Bianconi 
Signed-off-by: Felix Fietkau