<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/drivers/net/wireless/ipw2x00, branch v3.13</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next</title>
<updated>2013-10-07T19:40:44+00:00</updated>
<author>
<name>David S. Miller</name>
<email>davem@davemloft.net</email>
</author>
<published>2013-10-07T19:40:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=7009deab19d7be03e05f67ceac56cfdfc73aa71c'/>
<id>7009deab19d7be03e05f67ceac56cfdfc73aa71c</id>
<content type='text'>
Conflicts:
	drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
	drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
	drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
	drivers/net/wireless/rtlwifi/rtl8192de/phy.h
	drivers/net/wireless/rtlwifi/rtl8723ae/phy.h

Just some minor conflicts between the wireless-next changes
and Joe Perches's "extern" removal from function prototypes
in header files.

John W. Linville says:

====================
Regarding the Bluetooth bits, Gustavo says:

"The big work here is from Marcel and Johan. They did a lot of work
in the L2CAP, HCI and MGMT layers. The most important ones are the
addition of a new MGMT command to enable/disable LE advertisement
and the introduction of the HCI user channel to allow applications
to get directly and exclusive access to Bluetooth devices."

As to the ath10k bits, Kalle says:

"Bartosz dropped support for qca98xx hw1.0 hardware from ath10k, it's
just too much to support it. Michal added support for the new firmware
interface. Marek fixed WEP in AP and IBSS mode. Rest of the changes are
minor fixes or cleanups."

And also:

"Major changes are:

* throughput improvements including aligning the RX frames correctly and
  optimising HTT layer (Michal)

* remove qca98xx hw1.0 support (Bartosz)

* add support for firmware version 999.999.0.636 (Michal)

* firmware htt statistics support (Kalle)

* fix WEP in AP and IBSS mode (Marek)

* fix a mutex unlock balance in debugfs file (Shafi)

And of course there's a lot of smaller fixes and cleanup."

For the wl12xx bits, Luca says:

"Here are some patches intended for 3.13.  Eliad is upstreaming a bunch
of patches that have been pending in the internal tree.  Mostly bugfixes
and other small improvements."

Along with that...

Arend and friends bring us a batch of brcmfmac updates, Larry Finger
offers some rtlwifi refactoring, and Sujith sends the usual batch of
ath9k updates.  As usual, there are a number of other small updates
from a variety of players as well.
====================

Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Conflicts:
	drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
	drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
	drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
	drivers/net/wireless/rtlwifi/rtl8192de/phy.h
	drivers/net/wireless/rtlwifi/rtl8723ae/phy.h

Just some minor conflicts between the wireless-next changes
and Joe Perches's "extern" removal from function prototypes
in header files.

John W. Linville says:

====================
Regarding the Bluetooth bits, Gustavo says:

"The big work here is from Marcel and Johan. They did a lot of work
in the L2CAP, HCI and MGMT layers. The most important ones are the
addition of a new MGMT command to enable/disable LE advertisement
and the introduction of the HCI user channel to allow applications
to get directly and exclusive access to Bluetooth devices."

As to the ath10k bits, Kalle says:

"Bartosz dropped support for qca98xx hw1.0 hardware from ath10k, it's
just too much to support it. Michal added support for the new firmware
interface. Marek fixed WEP in AP and IBSS mode. Rest of the changes are
minor fixes or cleanups."

And also:

"Major changes are:

* throughput improvements including aligning the RX frames correctly and
  optimising HTT layer (Michal)

* remove qca98xx hw1.0 support (Bartosz)

* add support for firmware version 999.999.0.636 (Michal)

* firmware htt statistics support (Kalle)

* fix WEP in AP and IBSS mode (Marek)

* fix a mutex unlock balance in debugfs file (Shafi)

And of course there's a lot of smaller fixes and cleanup."

For the wl12xx bits, Luca says:

"Here are some patches intended for 3.13.  Eliad is upstreaming a bunch
of patches that have been pending in the internal tree.  Mostly bugfixes
and other small improvements."

Along with that...

Arend and friends bring us a batch of brcmfmac updates, Larry Finger
offers some rtlwifi refactoring, and Sujith sends the usual batch of
ath9k updates.  As usual, there are a number of other small updates
from a variety of players as well.
====================

Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net:drivers/net: Miscellaneous conversions to ETH_ALEN</title>
<updated>2013-10-02T21:04:45+00:00</updated>
<author>
<name>Joe Perches</name>
<email>joe@perches.com</email>
</author>
<published>2013-10-02T02:04:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=d458cdf712e0c671e8e819abb16ecd6e44f9daec'/>
<id>d458cdf712e0c671e8e819abb16ecd6e44f9daec</id>
<content type='text'>
Convert the memset/memcpy uses of 6 to ETH_ALEN
where appropriate.

Also convert some struct definitions and u8 array
declarations of [6] to ETH_ALEN.

Signed-off-by: Joe Perches &lt;joe@perches.com&gt;
Acked-by: Arend van Spriel &lt;arend@broadcom.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Convert the memset/memcpy uses of 6 to ETH_ALEN
where appropriate.

Also convert some struct definitions and u8 array
declarations of [6] to ETH_ALEN.

Signed-off-by: Joe Perches &lt;joe@perches.com&gt;
Acked-by: Arend van Spriel &lt;arend@broadcom.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wireless: ipw2x00: remove unnecessary pci_set_drvdata()</title>
<updated>2013-09-26T19:13:44+00:00</updated>
<author>
<name>Jingoo Han</name>
<email>jg1.han@samsung.com</email>
</author>
<published>2013-09-10T11:27:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=0acfd4b06e4b4550c94e24a582853df16d4eb5a5'/>
<id>0acfd4b06e4b4550c94e24a582853df16d4eb5a5</id>
<content type='text'>
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han &lt;jg1.han@samsung.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han &lt;jg1.han@samsung.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ipw2x00: Remove extern from function prototypes</title>
<updated>2013-09-25T01:05:03+00:00</updated>
<author>
<name>Joe Perches</name>
<email>joe@perches.com</email>
</author>
<published>2013-09-23T18:37:59+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=89eb744f1a77b32d6ec718618f356df3188403e7'/>
<id>89eb744f1a77b32d6ec718618f356df3188403e7</id>
<content type='text'>
There are a mix of function prototypes with and without extern
in the kernel sources.  Standardize on not using extern for
function prototypes.

Function prototypes don't need to be written with extern.
extern is assumed by the compiler.  Its use is as unnecessary as
using auto to declare automatic/local variables in a block.

Signed-off-by: Joe Perches &lt;joe@perches.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
There are a mix of function prototypes with and without extern
in the kernel sources.  Standardize on not using extern for
function prototypes.

Function prototypes don't need to be written with extern.
extern is assumed by the compiler.  Its use is as unnecessary as
using auto to declare automatic/local variables in a block.

Signed-off-by: Joe Perches &lt;joe@perches.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next</title>
<updated>2013-07-10T01:24:39+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2013-07-10T01:24:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=496322bc91e35007ed754184dcd447a02b6dd685'/>
<id>496322bc91e35007ed754184dcd447a02b6dd685</id>
<content type='text'>
Pull networking updates from David Miller:
 "This is a re-do of the net-next pull request for the current merge
  window.  The only difference from the one I made the other day is that
  this has Eliezer's interface renames and the timeout handling changes
  made based upon your feedback, as well as a few bug fixes that have
  trickeled in.

  Highlights:

   1) Low latency device polling, eliminating the cost of interrupt
      handling and context switches.  Allows direct polling of a network
      device from socket operations, such as recvmsg() and poll().

      Currently ixgbe, mlx4, and bnx2x support this feature.

      Full high level description, performance numbers, and design in
      commit 0a4db187a999 ("Merge branch 'll_poll'")

      From Eliezer Tamir.

   2) With the routing cache removed, ip_check_mc_rcu() gets exercised
      more than ever before in the case where we have lots of multicast
      addresses.  Use a hash table instead of a simple linked list, from
      Eric Dumazet.

   3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from
      Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski,
      Marek Puzyniak, Michal Kazior, and Sujith Manoharan.

   4) Support reporting the TUN device persist flag to userspace, from
      Pavel Emelyanov.

   5) Allow controlling network device VF link state using netlink, from
      Rony Efraim.

   6) Support GRE tunneling in openvswitch, from Pravin B Shelar.

   7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from
      Daniel Borkmann and Eric Dumazet.

   8) Allow controlling of TCP quickack behavior on a per-route basis,
      from Cong Wang.

   9) Several bug fixes and improvements to vxlan from Stephen
      Hemminger, Pravin B Shelar, and Mike Rapoport.  In particular,
      support receiving on multiple UDP ports.

  10) Major cleanups, particular in the area of debugging and cookie
      lifetime handline, to the SCTP protocol code.  From Daniel
      Borkmann.

  11) Allow packets to cross network namespaces when traversing tunnel
      devices.  From Nicolas Dichtel.

  12) Allow monitoring netlink traffic via AF_PACKET sockets, in a
      manner akin to how we monitor real network traffic via ptype_all.
      From Daniel Borkmann.

  13) Several bug fixes and improvements for the new alx device driver,
      from Johannes Berg.

  14) Fix scalability issues in the netem packet scheduler's time queue,
      by using an rbtree.  From Eric Dumazet.

  15) Several bug fixes in TCP loss recovery handling, from Yuchung
      Cheng.

  16) Add support for GSO segmentation of MPLS packets, from Simon
      Horman.

  17) Make network notifiers have a real data type for the opaque
      pointer that's passed into them.  Use this to properly handle
      network device flag changes in arp_netdev_event().  From Jiri
      Pirko and Timo Teräs.

  18) Convert several drivers over to module_pci_driver(), from Peter
      Huewe.

  19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a
      O(1) calculation instead.  From Eric Dumazet.

  20) Support setting of explicit tunnel peer addresses in ipv6, just
      like ipv4.  From Nicolas Dichtel.

  21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet.

  22) Prevent a single high rate flow from overruning an individual cpu
      during RX packet processing via selective flow shedding.  From
      Willem de Bruijn.

  23) Don't use spinlocks in TCP md5 signing fast paths, from Eric
      Dumazet.

  24) Don't just drop GSO packets which are above the TBF scheduler's
      burst limit, chop them up so they are in-bounds instead.  Also
      from Eric Dumazet.

  25) VLAN offloads are missed when configured on top of a bridge, fix
      from Vlad Yasevich.

  26) Support IPV6 in ping sockets.  From Lorenzo Colitti.

  27) Receive flow steering targets should be updated at poll() time
      too, from David Majnemer.

  28) Fix several corner case regressions in PMTU/redirect handling due
      to the routing cache removal, from Timo Teräs.

  29) We have to be mindful of ipv4 mapped ipv6 sockets in
      upd_v6_push_pending_frames().  From Hannes Frederic Sowa.

  30) Fix L2TP sequence number handling bugs, from James Chapman."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits)
  drivers/net: caif: fix wrong rtnl_is_locked() usage
  drivers/net: enic: release rtnl_lock on error-path
  vhost-net: fix use-after-free in vhost_net_flush
  net: mv643xx_eth: do not use port number as platform device id
  net: sctp: confirm route during forward progress
  virtio_net: fix race in RX VQ processing
  virtio: support unlocked queue poll
  net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit
  Documentation: Fix references to defunct linux-net@vger.kernel.org
  net/fs: change busy poll time accounting
  net: rename low latency sockets functions to busy poll
  bridge: fix some kernel warning in multicast timer
  sfc: Fix memory leak when discarding scattered packets
  sit: fix tunnel update via netlink
  dt:net:stmmac: Add dt specific phy reset callback support.
  dt:net:stmmac: Add support to dwmac version 3.610 and 3.710
  dt:net:stmmac: Allocate platform data only if its NULL.
  net:stmmac: fix memleak in the open method
  ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available
  net: ipv6: fix wrong ping_v6_sendmsg return value
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull networking updates from David Miller:
 "This is a re-do of the net-next pull request for the current merge
  window.  The only difference from the one I made the other day is that
  this has Eliezer's interface renames and the timeout handling changes
  made based upon your feedback, as well as a few bug fixes that have
  trickeled in.

  Highlights:

   1) Low latency device polling, eliminating the cost of interrupt
      handling and context switches.  Allows direct polling of a network
      device from socket operations, such as recvmsg() and poll().

      Currently ixgbe, mlx4, and bnx2x support this feature.

      Full high level description, performance numbers, and design in
      commit 0a4db187a999 ("Merge branch 'll_poll'")

      From Eliezer Tamir.

   2) With the routing cache removed, ip_check_mc_rcu() gets exercised
      more than ever before in the case where we have lots of multicast
      addresses.  Use a hash table instead of a simple linked list, from
      Eric Dumazet.

   3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from
      Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski,
      Marek Puzyniak, Michal Kazior, and Sujith Manoharan.

   4) Support reporting the TUN device persist flag to userspace, from
      Pavel Emelyanov.

   5) Allow controlling network device VF link state using netlink, from
      Rony Efraim.

   6) Support GRE tunneling in openvswitch, from Pravin B Shelar.

   7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from
      Daniel Borkmann and Eric Dumazet.

   8) Allow controlling of TCP quickack behavior on a per-route basis,
      from Cong Wang.

   9) Several bug fixes and improvements to vxlan from Stephen
      Hemminger, Pravin B Shelar, and Mike Rapoport.  In particular,
      support receiving on multiple UDP ports.

  10) Major cleanups, particular in the area of debugging and cookie
      lifetime handline, to the SCTP protocol code.  From Daniel
      Borkmann.

  11) Allow packets to cross network namespaces when traversing tunnel
      devices.  From Nicolas Dichtel.

  12) Allow monitoring netlink traffic via AF_PACKET sockets, in a
      manner akin to how we monitor real network traffic via ptype_all.
      From Daniel Borkmann.

  13) Several bug fixes and improvements for the new alx device driver,
      from Johannes Berg.

  14) Fix scalability issues in the netem packet scheduler's time queue,
      by using an rbtree.  From Eric Dumazet.

  15) Several bug fixes in TCP loss recovery handling, from Yuchung
      Cheng.

  16) Add support for GSO segmentation of MPLS packets, from Simon
      Horman.

  17) Make network notifiers have a real data type for the opaque
      pointer that's passed into them.  Use this to properly handle
      network device flag changes in arp_netdev_event().  From Jiri
      Pirko and Timo Teräs.

  18) Convert several drivers over to module_pci_driver(), from Peter
      Huewe.

  19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a
      O(1) calculation instead.  From Eric Dumazet.

  20) Support setting of explicit tunnel peer addresses in ipv6, just
      like ipv4.  From Nicolas Dichtel.

  21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet.

  22) Prevent a single high rate flow from overruning an individual cpu
      during RX packet processing via selective flow shedding.  From
      Willem de Bruijn.

  23) Don't use spinlocks in TCP md5 signing fast paths, from Eric
      Dumazet.

  24) Don't just drop GSO packets which are above the TBF scheduler's
      burst limit, chop them up so they are in-bounds instead.  Also
      from Eric Dumazet.

  25) VLAN offloads are missed when configured on top of a bridge, fix
      from Vlad Yasevich.

  26) Support IPV6 in ping sockets.  From Lorenzo Colitti.

  27) Receive flow steering targets should be updated at poll() time
      too, from David Majnemer.

  28) Fix several corner case regressions in PMTU/redirect handling due
      to the routing cache removal, from Timo Teräs.

  29) We have to be mindful of ipv4 mapped ipv6 sockets in
      upd_v6_push_pending_frames().  From Hannes Frederic Sowa.

  30) Fix L2TP sequence number handling bugs, from James Chapman."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits)
  drivers/net: caif: fix wrong rtnl_is_locked() usage
  drivers/net: enic: release rtnl_lock on error-path
  vhost-net: fix use-after-free in vhost_net_flush
  net: mv643xx_eth: do not use port number as platform device id
  net: sctp: confirm route during forward progress
  virtio_net: fix race in RX VQ processing
  virtio: support unlocked queue poll
  net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit
  Documentation: Fix references to defunct linux-net@vger.kernel.org
  net/fs: change busy poll time accounting
  net: rename low latency sockets functions to busy poll
  bridge: fix some kernel warning in multicast timer
  sfc: Fix memory leak when discarding scattered packets
  sit: fix tunnel update via netlink
  dt:net:stmmac: Add dt specific phy reset callback support.
  dt:net:stmmac: Add support to dwmac version 3.610 and 3.710
  dt:net:stmmac: Allocate platform data only if its NULL.
  net:stmmac: fix memleak in the open method
  ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available
  net: ipv6: fix wrong ping_v6_sendmsg return value
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>ipw2200: convert __list_for_each usage to list_for_each</title>
<updated>2013-07-03T23:07:43+00:00</updated>
<author>
<name>Dave Jones</name>
<email>davej@redhat.com</email>
</author>
<published>2013-07-03T22:05:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=5cb0656b62ff1199763764e4f6b4c06d30d5d0f5'/>
<id>5cb0656b62ff1199763764e4f6b4c06d30d5d0f5</id>
<content type='text'>
Signed-off-by: Dave Jones &lt;davej@redhat.com&gt;
Cc: Stanislav Yakovlev &lt;stas.yakovlev@gmail.com&gt;
Cc: "John W. Linville" &lt;linville@tuxdriver.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Dave Jones &lt;davej@redhat.com&gt;
Cc: Stanislav Yakovlev &lt;stas.yakovlev@gmail.com&gt;
Cc: "John W. Linville" &lt;linville@tuxdriver.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ipw2x00: printing the wrong array in debug code</title>
<updated>2013-06-24T18:44:25+00:00</updated>
<author>
<name>Dan Carpenter</name>
<email>dan.carpenter@oracle.com</email>
</author>
<published>2013-06-21T12:26:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=428e3cf5f98cf9528586854b1c4f9f9f76f54b4e'/>
<id>428e3cf5f98cf9528586854b1c4f9f9f76f54b4e</id>
<content type='text'>
Smatch complains that this is a read past the end of the array.  It
turns out we are printing the wrong array here.

Signed-off-by: Dan Carpenter &lt;dan.carpenter@oracle.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Smatch complains that this is a read past the end of the array.  It
turns out we are printing the wrong array here.

Signed-off-by: Dan Carpenter &lt;dan.carpenter@oracle.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ipw2200: fix error return code in ipw_load()</title>
<updated>2013-06-24T18:44:23+00:00</updated>
<author>
<name>Wei Yongjun</name>
<email>yongjun_wei@trendmicro.com.cn</email>
</author>
<published>2013-06-21T02:42:19+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=5d9e3bc21c57d600b706a31454d5cf2f68c24f53'/>
<id>5d9e3bc21c57d600b706a31454d5cf2f68c24f53</id>
<content type='text'>
Fix to return -ENOMEM in the ipw_rx_queue_alloc() error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun &lt;yongjun_wei@trendmicro.com.cn&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Fix to return -ENOMEM in the ipw_rx_queue_alloc() error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun &lt;yongjun_wei@trendmicro.com.cn&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net, ipw2x00: remove redundant D0 power state set</title>
<updated>2013-06-03T19:55:45+00:00</updated>
<author>
<name>Yijing Wang</name>
<email>wangyijing@huawei.com</email>
</author>
<published>2013-05-30T10:21:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=bda96e8c6a751d8f57a5564e18adf33f2a2d857e'/>
<id>bda96e8c6a751d8f57a5564e18adf33f2a2d857e</id>
<content type='text'>
Pci_enable_device() will set device power state to D0,
so it's no need to do it again in ipw2100_pci_init_one().

Signed-off-by: Yijing Wang &lt;wangyijing@huawei.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pci_enable_device() will set device power state to D0,
so it's no need to do it again in ipw2100_pci_init_one().

Signed-off-by: Yijing Wang &lt;wangyijing@huawei.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ipw2x00: move to kstrto* functions</title>
<updated>2013-04-10T18:10:34+00:00</updated>
<author>
<name>Andy Shevchenko</name>
<email>andriy.shevchenko@linux.intel.com</email>
</author>
<published>2013-04-10T11:01:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=fe29f54cd574eab7b521445419f355c0ecd995cc'/>
<id>fe29f54cd574eab7b521445419f355c0ecd995cc</id>
<content type='text'>
There is better to use kstrto* instead of simple_strtoul. In this case it
applies a bit stricter rules for input as well.

Signed-off-by: Andy Shevchenko &lt;andriy.shevchenko@linux.intel.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
There is better to use kstrto* instead of simple_strtoul. In this case it
applies a bit stricter rules for input as well.

Signed-off-by: Andy Shevchenko &lt;andriy.shevchenko@linux.intel.com&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
