linux.git/drivers/net/wireless/b43, branch v2.6.27

Revert "b43/b43legacy: add RFKILL_STATE_HARD_BLOCKED support"

2008-09-17T02:32:30+00:00

This reverts commit bc19d6e0b74ef03a3baf035412c95192b54dfc6f, which as
Larry Finger reports causes the radio LED on his system to no longer
respond to rfkill switch events.

Reported-by: Larry Finger 
Requested-by: John W. Linville 
Signed-off-by: Linus Torvalds

removed unused #include

2008-08-18T15:05:15+00:00

The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  drivers/net/wireless/ath5k/base.c
  drivers/net/wireless/b43/main.c
  drivers/net/wireless/ipw2100.c
  drivers/net/wireless/ipw2200.c
  drivers/net/wireless/iwlwifi/iwl-3945.c
  drivers/net/wireless/iwlwifi/iwl-4965.c
  drivers/net/wireless/iwlwifi/iwl-5000.c
  drivers/net/wireless/iwlwifi/iwl-agn.c
  drivers/net/wireless/iwlwifi/iwl-core.c
  drivers/net/wireless/iwlwifi/iwl-eeprom.c
  drivers/net/wireless/iwlwifi/iwl-hcmd.c
  drivers/net/wireless/iwlwifi/iwl-power.c
  drivers/net/wireless/iwlwifi/iwl3945-base.c

This patch removes the said #include .

Signed-off-by: Huang Weiyi 
Signed-off-by: John W. Linville

b43: Fix for another Bluetooth Coexistence SPROM Programming error for BCM4306

2008-08-18T15:05:15+00:00

In trying to help users on the Ubuntu Bugzilla, I discovered another
BCM4306 with the Bluetooth Coexistence programming error in the SPROM.

This patch is contingent on the one that added the Linksys device with
subdevice code of 0x0014.

Signed-off-by: Larry Finger 
Cc: Stable 
Signed-off-by: John W. Linville

b43: Fix for SPROM coding error in Linksys WMP54G (BCM4306/3)

2008-08-18T15:05:13+00:00

The Linksys WMP54G (BCM4306/3) card in a PCI format has an SPROM coding
error and needs the fix found for several other cards.

Signed-off-by: Larry Finger 
Cc: Stable 		[2.6.25.x, 2.6.26.x]
Signed-off-by: Michael Buesch 
Signed-off-by: John W. Linville

mac80211: partially fix skb->cb use

2008-07-29T20:55:08+00:00

This patch fixes mac80211 to not use the skb->cb over the queue step
from virtual interfaces to the master. The patch also, for now,
disables aggregation because that would still require requeuing,
will fix that in a separate patch. There are two other places (software
requeue and powersaving stations) where requeue can happen, but that is
not currently used by any drivers/not possible to use respectively.

Signed-off-by: Johannes Berg 
Signed-off-by: John W. Linville

mac80211: remove IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE flag

2008-07-29T20:36:24+00:00

I forgot this in the previous patch that made it unused.

Signed-off-by: Johannes Berg 
Signed-off-by: John W. Linville

wireless: fix warnings from QoS patch

2008-07-15T09:08:24+00:00

When I removed the special "default" meaning from the QoS
parameters, I forgot to update drivers and this lead to
warnings because some drivers were checking for the special
values and putting in defaults. This fixes that by removing
the default special-casing completely.

Signed-off-by: Johannes Berg 
Signed-off-by: David S. Miller

mac80211: fix TX sequence numbers

2008-07-14T18:52:57+00:00

This patch makes mac80211 assign proper sequence numbers to
QoS-data frames. It also removes the old sequence number code
because we noticed that only the driver or hardware can assign
sequence numbers to non-QoS-data and especially management
frames in a race-free manner because beacons aren't passed
through mac80211's TX path.

This patch also adds temporary code to the rt2x00 drivers to
not break them completely, that code will have to be reworked
for proper sequence numbers on beacons.

It also moves sequence number assignment down in the TX path
so no sequence numbers are assigned to frames that are dropped.

Signed-off-by: Johannes Berg 
Signed-off-by: John W. Linville

mac80211: revamp beacon configuration

2008-07-14T18:30:07+00:00

This patch changes mac80211's beacon configuration handling
to never pass skbs to the driver directly but rather always
require the driver to use ieee80211_beacon_get(). Additionally,
it introduces "change flags" on the config_interface() call
to enable drivers to figure out what is changing. Finally, it
removes the beacon_update() driver callback in favour of
having IBSS beacon delivered by ieee80211_beacon_get() as well.

Signed-off-by: Johannes Berg 
Signed-off-by: John W. Linville

b43/b43legacy: add RFKILL_STATE_HARD_BLOCKED support

2008-06-30T21:37:37+00:00

This patch sets the rfkill state to RFKILL_STATE_HARD_BLOCKED when the
radio is killed by the hardware switch.

Signed-off-by: Adel Gadllah 
Signed-off-by: John W. Linville