linux.git/drivers/net/wireless/ath, branch vsnprintf

Merge tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

2024-11-14T02:35:19+00:00

Kalle Valo says:

====================
wireless-next patches for v6.13

Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.

Major changes:

mac80211
 * EHT 1024 aggregation size for transmissions

ath12k
 * switch to using wiphy_lock() and remove ar->conf_mutex
 * firmware coredump collection support
 * add debugfs support for a multitude of statistics

ath11k
 * dt: document WCN6855 hardware inputs

ath9k
 * remove include/linux/ath9k_platform.h

ath5k
 * Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support

rtw88:
 * 8821au and 8812au USB adapters support

rtw89
 * thermal protection
 * firmware secure boot for WiFi 6 chip

* tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits)
  Revert "wifi: iwlegacy: do not skip frames with bad FCS"
  wifi: mac80211: pass MBSSID config by reference
  wifi: mac80211: Support EHT 1024 aggregation size in TX
  net: rfkill: gpio: Add check for clk_enable()
  wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
  wifi: Switch back to struct platform_driver::remove()
  wifi: ipw2x00: libipw_rx_any(): fix bad alignment
  wifi: brcmfmac: release 'root' node in all execution paths
  wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend
  wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA
  wifi: iwlwifi: bump minimum API version in BZ/SC to 92
  wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h
  wifi: iwlwifi: be less noisy if the NIC is dead in S3
  wifi: iwlwifi: mvm: tell iwlmei when we finished suspending
  wifi: iwlwifi: allow fast resume on ax200
  wifi: iwlwifi: mvm: support new initiator and responder command version
  wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency
  wifi: iwlwifi: mvm: MLO scan upon channel condition degradation
  wifi: iwlwifi: mvm: support new versions of the wowlan APIs
  wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif()
  ...
====================

Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski

wifi: Switch back to struct platform_driver::remove()

2024-11-11T12:10:45+00:00

After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/net/wireless to use
.remove(), with the eventual goal to drop struct
platform_driver::remove_new(). As .remove() and .remove_new() have the
same prototypes, conversion is done by just changing the structure
member name in the driver initializer.

En passant several whitespace changes are done to make indentation
consistent in the struct initializers.

Signed-off-by: Uwe Kleine-König 
Acked-by: Jeff Johnson 
Acked-by: Toke Høiland-Jørgensen 
Acked-by: Arend van Spriel 
Acked-by: Jiri Slaby 
Signed-off-by: Kalle Valo 
Link: https://patch.msgid.link/20241106170706.38922-2-u.kleine-koenig@baylibre.com

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-11-01T01:10:07+00:00

Cross-merge networking fixes after downstream PR (net-6.12-rc6).

Conflicts:

drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c
  cbe84e9ad5e2 ("wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd")
  188a1bf89432 ("wifi: mac80211: re-order assigning channel in activate links")
https://lore.kernel.org/all/20241028123621.7bbb131b@canb.auug.org.au/

net/mac80211/cfg.c
  c4382d5ca1af ("wifi: mac80211: update the right link for tx power")
  8dd0498983ee ("wifi: mac80211: Fix setting txpower with emulate_chanctx")

drivers/net/ethernet/intel/ice/ice_ptp_hw.h
  6e58c3310622 ("ice: fix crash on probe for DPLL enabled E810 LOM")
  e4291b64e118 ("ice: Align E810T GPIO to other products")
  ebb2693f8fbd ("ice: Read SDP section from NVM for pin definitions")
  ac532f4f4251 ("ice: Cleanup unused declarations")
https://lore.kernel.org/all/20241030120524.1ee1af18@canb.auug.org.au/

No adjacent changes.

Signed-off-by: Jakub Kicinski

Merge tag 'ath-next-20241030' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath

2024-10-31T14:03:57+00:00

ath.git patches for v6.13

This development cycle featured phase 1 of patches to ath12k to
support the new 802.11be MLO feature, along with other ath12k feature
patches.  In older drivers, support for some additional devices were
added. And there was the usual set of bug fixes and cleanups across
most drivers.

Per-driver highlights:

ath12k
* Switch to using wiphy_lock() and remove ar->conf_mutex
* Convert struct ath12k_sta::update_wk to use struct wiphy_work
* Add phase 1 of 802.11be MLO support
* Add firmware coredump collection support
* Add debugfs support for a multitude of statistics
* Fix host representation of multiple hal_rx structs
* Fix use-after-free in ath12k_dp_cc_cleanup()
* Skip Rx TID cleanup for self peer
* Fix warning and crash when unloading in a VM
* Convert CE interrupt handling from tasklet to BH workqueue
* Fix A-MSDU indication in monitor mode

ath11k
* Fix double free issue during SRNG deinit
* Enable firmware diagnostic events for WCN6750
* Fix CE offset address calculation for WCN6750 during SSR
* Fix stack frame size warning in ath11k_vif_wow_set_wakeups()
* Document the inputs for ath11k on WCN6855

ath10k
* Fix multiple stack frame size warnings
* Fix invalid VHT parameters in supported_vht_mcs_rate_nss* structs
* Avoid NULL pointer error during SDIO remove

ath5k
* Add support for Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A

wifi: ath12k: convert tasklet to BH workqueue for CE interrupts

2024-10-25T19:22:03+00:00

Currently in Ath12k, tasklet is used to handle the BH context of CE
interrupts. However the tasklet is marked deprecated and has some
design flaws. To replace tasklets, BH workqueue support has been
added. BH workqueue behaves similarly to regular workqueues except
that the queued work items are executed in the BH context.

Hence, convert the tasklet to BH workqueue for handling CE interrupts
in the BH context.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Raj Kumar Bhagat 
Acked-by: Kalle Valo 
Link: https://patch.msgid.link/20241022072406.3231450-1-quic_rajkbhag@quicinc.com
Signed-off-by: Jeff Johnson

Merge tag 'wireless-2024-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless

2024-10-25T09:44:41+00:00

wireless fixes for v6.12-rc5

The first set of wireless fixes for v6.12. We have been busy and have
not been able to send this earlier, so there are more fixes than
usual. The fixes are all over, both in stack and in drivers, but
nothing special really standing out.

wifi: ath12k: fix A-MSDU indication in monitor mode

2024-10-23T17:16:01+00:00

In monitor mode, host will reap MSDUs and then the MSDUs with same PPDU
ID will be aggregated into an A-MSDU in ath12k_dp_mon_rx_merg_msdus().

However, ath12k_dp_mon_rx_merg_msdus() doesn't calculate the total
length of the A-MSDU. This causes Wireshark to display the A-MSDU
incorrectly.

Therefore, need to add calculation of the A-MSDU length.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Kang Yang 
Acked-by: Jeff Johnson 
Link: https://patch.msgid.link/20241022110831.974-9-quic_kangyang@quicinc.com
Signed-off-by: Jeff Johnson

wifi: ath12k: use tail MSDU to get MSDU information

2024-10-23T17:16:01+00:00

When receiving a packet in monitor mode, hardware will fill status
information msdu_end for MSDUs. Then host can use these status
information to get specific information about this packet, such as
l3 offset, bandwidth, mcs, packet type.

If this packet is composed of multiple MSDUs, then hardware will only
fill status information for the last(tail) MSDU. At this time,
MSDU information is uncertain for others MSDUs. But current code use
the first MSDU in monitor mode, so will get the wrong information.

Fix it by getting msdu information from last(tail) msdu.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Kang Yang 
Acked-by: Jeff Johnson 
Link: https://patch.msgid.link/20241022110831.974-8-quic_kangyang@quicinc.com
Signed-off-by: Jeff Johnson

wifi: ath12k: delete NSS and TX power setting for monitor vdev

2024-10-23T17:16:01+00:00

ath12k_mac_monitor_vdev_create() will set NSS and TX power to
firmware for monitor vdev.

But firmware doesn't need them for monitor mode.

So delete them as a cleanup.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang 
Link: https://patch.msgid.link/20241022110831.974-7-quic_kangyang@quicinc.com
Signed-off-by: Jeff Johnson

wifi: ath12k: fix struct hal_rx_mpdu_start

2024-10-23T17:16:00+00:00

Current struct hal_rx_mpdu_start in hal_rx.h is not matched with
hardware descriptor definition. This hardware descriptor definition
is determined by hardware. Host shall follow it.

So update struct hal_rx_mpdu_start and related code.

Both QCN9274 and WCN7850 need this modification.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang 
Acked-by: Jeff Johnson 
Link: https://patch.msgid.link/20241022110831.974-6-quic_kangyang@quicinc.com
Signed-off-by: Jeff Johnson