linux.git/drivers/net/vmxnet3, branch v4.2

vmxnet3: prevent receive getting out of sequence on napi poll

2015-07-09T06:36:11+00:00

vmxnet3's current napi path is built to count every rx descriptor we recieve,
and use that as a count of the napi budget.  That means its possible to return
from a napi poll halfway through recieving a fragmented packet accross multiple
dma descriptors.  If that happens, the next napi poll will start with the
descriptor ring in an improper state (e.g. the first descriptor we look at may
have the end-of-packet bit set), which will cause a BUG halt in the driver.

Fix the issue by only counting whole received packets in the napi poll and
returning that value, rather than the descriptor count.

Tested by the reporter and myself, successfully

Signed-off-by: Neil Horman 
CC: Shreyas Bhatewara 
CC: "David S. Miller" 
Acked-by: Andy Gospodarek 
Signed-off-by: David S. Miller

vmxnet3: Bump up driver version number

2015-06-29T16:27:45+00:00

Bump up the driver version number to reflect the changes done to
work with vmxnet3 adapter version 2

Signed-off-by: Shreyas N Bhatewara 
Signed-off-by: David S. Miller

vmxnet3: Changes for vmxnet3 adapter version 2 (fwd)

2015-06-23T13:26:01+00:00

Make the driver understand adapter version 2.

Cc: Rachel Lunnon 
Signed-off-by: Guolin Yang 
Signed-off-by: Shreyas N Bhatewara 
Signed-off-by: David S. Miller

vmxnet3: Fix memory leaks in rx path (fwd)

2015-06-23T13:26:00+00:00

If rcd length was zero, the page used for frag was not being released. It
was being replaced with a newly allocated page. This change takes care
of that memory leak.

Signed-off-by: Guolin Yang 
Signed-off-by: Shreyas N Bhatewara 
Signed-off-by: David S. Miller

vmxnet3: Register shutdown handler for device (fwd)

2015-06-23T13:25:59+00:00

Implement a handler for pci shutdown so that the driver has an
opportunity to make sure that device is quiesced before the PCI
switches to legacy IRQs. This way the possibility of
"screaming interrupt" is avoided.

Acked-by: Shrikrishna Khare 
Signed-off-by: Shreyas N Bhatewara 
Signed-off-by: David S. Miller

vmxnet3: spelling fixes

2015-04-02T02:52:29+00:00

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

Driver: Vmxnet3: Copy TCP header to mapped frame for IPv6 packets

2015-03-02T04:03:42+00:00

Allows for packet parsing to be done by the fast path. This performance
optimization already exists for IPv4. Add similar logic for IPv6.

Signed-off-by: Amitabha Banerjee 
Signed-off-by: Shrikrishna Khare 
Signed-off-by: David S. Miller

Driver: Vmxnet3: Change the hex constant to its decimal equivalent

2015-02-09T00:55:01+00:00

The hex constant chosen for VMXNET3_REV1_MAGIC is offensive,
replace it with its decimal equivalent.

Signed-off-by: Shrikrishna Khare 
Reviewed-by: Shreyas Bhatewara 
Signed-off-by: David S. Miller

Driver: Vmxnet3: Fix ethtool -S to return correct rx queue stats

2015-01-16T05:30:05+00:00

Signed-off-by: Gao Zhenyu 
Signed-off-by: Shrikrishna Khare 
Reviewed-by: Shreyas N Bhatewara 
Signed-off-by: David S. Miller

net: rename vlan_tx_* helpers since "tx" is misleading there

2015-01-13T22:51:08+00:00

The same macros are used for rx as well. So rename it.

Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller