Pull networking fixes and stragglers from Jakub Kicinski:
 "Networking stragglers and fixes, including changes from netfilter,
  wireless and can.

  Current release - regressions:

   - qrtr: revert check in qrtr_endpoint_post(), fixes audio and wifi

   - ip_gre: validate csum_start only on pull

   - bnxt_en: fix 64-bit doorbell operation on 32-bit kernels

   - ionic: fix double use of queue-lock, fix a sleeping in atomic

   - can: c_can: fix null-ptr-deref on ioctl()

   - cs89x0: disable compile testing on powerpc

  Current release - new code bugs:

   - bridge: mcast: fix vlan port router deadlock, consistently disable
     BH

  Previous releases - regressions:

   - dsa: tag_rtl4_a: fix egress tags, only port 0 was working

   - mptcp: fix possible divide by zero

   - netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex

   - netfilter: socket: icmp6: fix use-after-scope

   - stmmac: fix MAC not working when system resume back with WoL active

  Previous releases - always broken:

   - ip/ip6_gre: use the same logic as SIT interfaces when computing
     v6LL address

   - seg6: set fc_nlinfo in nh_create_ipv4, nh_create_ipv6

   - mptcp: only send extra TCP acks in eligible socket states

   - dsa: lantiq_gswip: fix maximum frame length

   - stmmac: fix overall budget calculation for rxtx_napi

   - bnxt_en: fix firmware version reporting via devlink

   - renesas: sh_eth: add missing barrier to fix freeing wrong tx
     descriptor

  Stragglers:

   - netfilter: conntrack: switch to siphash

   - netfilter: refuse insertion if chain has grown too large

   - ncsi: add get MAC address command to get Intel i210 MAC address"

* tag 'net-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
  ieee802154: Remove redundant initialization of variable ret
  net: stmmac: fix MAC not working when system resume back with WoL active
  net: phylink: add suspend/resume support
  net: renesas: sh_eth: Fix freeing wrong tx descriptor
  bonding: 3ad: pass parameter bond_params by reference
  cxgb3: fix oops on module removal
  can: c_can: fix null-ptr-deref on ioctl()
  can: rcar_canfd: add __maybe_unused annotation to silence warning
  net: wwan: iosm: Unify IO accessors used in the driver
  net: wwan: iosm: Replace io.*64_lo_hi() with regular accessors
  net: qcom/emac: Replace strlcpy with strscpy
  ip6_gre: Revert "ip6_gre: add validation for csum_start"
  net: hns3: make hclgevf_cmd_caps_bit_map0 and hclge_cmd_caps_bit_map0 static
  selftests/bpf: Test XDP bonding nest and unwind
  bonding: Fix negative jump label count on nested bonding
  MAINTAINERS: add VM SOCKETS (AF_VSOCK) entry
  stmmac: dwmac-loongson:Fix missing return value
  iwlwifi: fix printk format warnings in uefi.c
  net: create netdev->dev_addr assignment helpers
  bnxt_en: Fix possible unintended driver initiated error recovery
  ...

This patch adds support for Telit LN920 0x1060 composition

0x1060: tty, adb, rmnet, tty, tty, tty, tty

Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit LN920
0x1061 composition in order to avoid bind error.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the network devices connected to the system beyond
HSO_MAX_NET_DEVICES. add_net_device() in hso_create_net_device()
will be failed for the network_table is full. It will lead to
business failure which rely on network_table, for example,
hso_suspend() and hso_resume(). It will also lead to memory leak
because resource release process can not search the hso_device
object from network_table in hso_free_interface().

Add failure handler for add_net_device() in hso_create_net_device()
to solve the above problems.

Fixes: 72dc1c096c70 ("HSO: add option hso driver")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull tty / serial updates from Greg KH:
 "Here is the "big" set of tty/serial driver patches for 5.15-rc1

  Nothing major in here at all, just some driver updates and more
  cleanups on old tty apis and code that needed it that includes:

   - tty.h cleanup of things that didn't belong in it

   - other tty cleanups by Jiri

   - driver cleanups

   - rs485 support added to amba-pl011 driver

   - dts updates

   - stm32 serial driver updates

   - other minor fixes and driver updates

  All have been in linux-next for a while with no reported problems"

* tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits)
  tty: serial: uartlite: Use read_poll_timeout for a polling loop
  tty: serial: uartlite: Use constants in early_uartlite_putc
  tty: Fix data race between tiocsti() and flush_to_ldisc()
  serial: vt8500: Use of_device_get_match_data
  serial: tegra: Use of_device_get_match_data
  serial: 8250_ingenic: Use of_device_get_match_data
  tty: serial: linflexuart: Remove redundant check to simplify the code
  tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp
  tty: serial: fsl_lpuart: enable two stop bits for lpuart32
  tty: serial: fsl_lpuart: fix the wrong mapbase value
  mxser: use semi-colons instead of commas
  tty: moxa: use semi-colons instead of commas
  tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback
  tty: replace in_irq() with in_hardirq()
  serial: sh-sci: fix break handling for sysrq
  serial: stm32: use devm_platform_get_and_ioremap_resource()
  serial: stm32: use the defined variable to simplify code
  Revert "arm pl011 serial: support multi-irq request"
  tty: serial: samsung: Add Exynos850 SoC data
  tty: serial: samsung: Fix driver data macros style
  ...

drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/usb/asix_devices.c:757:60-65: WARNING: conversion to bool not needed here

 Remove unneeded conversion to bool

Semantic patch information:
 Relational and logical operators evaluate to bool,
 explicit conversion is overly verbose and unneeded.

Generated by: scripts/coccinelle/misc/boolconv.cocci

Fixes: 7a141e64cf14 ("net: usb: asix: ax88772: move embedded PHY detection as early as possible")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20210825183538.13070-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Device removal can result in a large burst of driver warning messages
(20 - 30) sent to the kernel log. Most of these are register read/write
failures.

This change limits the rate at which these messages are emitted.

Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If there is a device disconnect at roughly the same time as a
deferred PHY link reset there is a race condition that can result
in a kernel lock up due to a null pointer dereference in the
driver's deferred work handling routine lan78xx_delayedwork().
The following changes fix this problem.

Add new status flag EVENT_DEV_DISCONNECT to indicate when the
device has been removed and use it to prevent operations, such as
register access, that will fail once the device is removed.

Stop processing of deferred work items when the driver's USB
disconnect handler is invoked.

Disconnect the PHY only after the network device has been
unregistered and all delayed work has been cancelled.

Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the interface is given an IP address while the device is
suspended (as a result of an auto-suspend event) there is a race
between lan78xx_resume() and lan78xx_open() that can result in an
exception or failure to handle incoming packets. The following
changes fix this problem.

Introduce a mutex to serialise operations in the network interface
open and stop entry points with respect to the USB driver suspend
and resume entry points.

Move Tx and Rx data path start/stop to lan78xx_start() and
lan78xx_stop() respectively and flush the packet FIFOs before
starting the Tx and Rx data paths. This prevents the MAC and FIFOs
getting out of step and delivery of malformed packets to the network
stack.

Stop processing of received packets before disconnecting the
PHY from the MAC to prevent a kernel exception caused by handling
packets after the PHY device has been removed.

Refactor device auto-suspend code to make it consistent with the
the system suspend code and make the suspend handler easier to read.

Add new code to stop wake-on-lan packets or PHY events resuming the
host or device from suspend if the device has not been opened
(typically after an IP address is assigned).

This patch is dependent on changes to lan78xx_suspend() and
lan78xx_resume() introduced in the previous patch of this patch set.

Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>