linux.git/drivers/net/usb, branch v5.0-rc3 Linux kernel source tree net: usb: aqc111: Extend HWID table by TRENDnet device 2019-01-16T21:32:42+00:00 Dmitry Bezrukov dmitry.bezrukov@aquantia.com 2019-01-14T08:14:41+00:00 9098f21f4cc0f13bc0caa747590e53479c267405 New device of TRENDnet based on aqc111u Add this ID to blacklist of cdc_ether driver as well Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
New device of TRENDnet based on aqc111u
Add this ID to blacklist of cdc_ether driver as well

Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
cdc_ether: trivial whitespace readability fix 2019-01-07T16:33:18+00:00 Bjørn Mork bjorn@mork.no 2019-01-05T13:32:39+00:00 a29c3c09bad18ac2c91dfdbcc892a7a37e407227 This function is unreadable enough without indenting mismatches and unnecessary line breaks. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> 
This function is unreadable enough without indenting mismatches
and unnecessary line breaks.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
qmi_wwan: add MTU default to qmap network interface 2019-01-04T21:35:42+00:00 Daniele Palmas dnlplm@gmail.com 2019-01-04T12:26:10+00:00 f87118d5760f00af7228033fbe783c7f380d2866 This patch adds MTU default value to qmap network interface in order to avoid "RTNETLINK answers: No buffer space available" error when setting an ipv6 address. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> 
This patch adds MTU default value to qmap network interface in
order to avoid "RTNETLINK answers: No buffer space available"
error when setting an ipv6 address.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-12-21T23:06:20+00:00 David S. Miller davem@davemloft.net 2018-12-21T23:06:20+00:00 ce28bb4453880759c5bdc2751629f1a865ea4a6e 






qmi_wwan: Fix qmap header retrieval in qmimux_rx_fixup
2018-12-21T18:58:45+00:00

Daniele Palmas
dnlplm@gmail.com

2018-12-21T12:07:23+00:00

d667044f49513d55fcfefe4fa8f8d96091782901

This patch fixes qmap header retrieval when modem is configured for
dl data aggregation.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>





This patch fixes qmap header retrieval when modem is configured for
dl data aggregation.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>







qmi_wwan: Add support for Fibocom NL678 series
2018-12-21T18:51:21+00:00

Jörgen Storvist
jorgen.storvist@gmail.com

2018-12-21T14:38:52+00:00

7c3db4105ce8d69bcb5c04bfa9acd1e9119af8d5

Added support for Fibocom NL678 series cellular module QMI interface.
Using QMI_QUIRK_SET_DTR required for Qualcomm MDM9x40 series chipsets.

Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>





Added support for Fibocom NL678 series cellular module QMI interface.
Using QMI_QUIRK_SET_DTR required for Qualcomm MDM9x40 series chipsets.

Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>







Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
2018-12-20T19:53:36+00:00

David S. Miller
davem@davemloft.net

2018-12-20T18:53:28+00:00

2be09de7d6a06f58e768de1255a687c9aaa66606

Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.

Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.

Signed-off-by: David S. Miller <davem@davemloft.net>





Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.

Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.

Signed-off-by: David S. Miller <davem@davemloft.net>







lan78xx: Resolve issue with changing MAC address
2018-12-19T05:40:59+00:00

Jason Martinsen
jasonmartinsen@msn.com

2018-12-18T05:38:22+00:00

15515aaaa69659c502003926a2067ee76176148a

Current state for the lan78xx driver does not allow for changing the
MAC address of the interface, without either removing the module (if
you compiled it that way) or rebooting the machine.  If you attempt to
change the MAC address, ifconfig will show the new address, however,
the system/interface will not respond to any traffic using that
configuration.  A few short-term options to work around this are to
unload the module and reload it with the new MAC address, change the
interface to "promisc", or reboot with the correct configuration to
change the MAC.

This patch enables the ability to change the MAC address via fairly normal means...
ifdown <interface>
modify entry in /etc/network/interfaces OR a similar method
ifup <interface>
Then test via any network communication, such as ICMP requests to gateway.

My only test platform for this patch has been a raspberry pi model 3b+.

Signed-off-by: Jason Martinsen <jasonmartinsen@msn.com>

-----

Signed-off-by: David S. Miller <davem@davemloft.net>





Current state for the lan78xx driver does not allow for changing the
MAC address of the interface, without either removing the module (if
you compiled it that way) or rebooting the machine.  If you attempt to
change the MAC address, ifconfig will show the new address, however,
the system/interface will not respond to any traffic using that
configuration.  A few short-term options to work around this are to
unload the module and reload it with the new MAC address, change the
interface to "promisc", or reboot with the correct configuration to
change the MAC.

This patch enables the ability to change the MAC address via fairly normal means...
ifdown <interface>
modify entry in /etc/network/interfaces OR a similar method
ifup <interface>
Then test via any network communication, such as ICMP requests to gateway.

My only test platform for this patch has been a raspberry pi model 3b+.

Signed-off-by: Jason Martinsen <jasonmartinsen@msn.com>

-----

Signed-off-by: David S. Miller <davem@davemloft.net>







qmi_wwan: Added support for Telit LN940 series
2018-12-15T19:46:43+00:00

Jörgen Storvist
jorgen.storvist@gmail.com

2018-12-13T16:00:35+00:00

1986af16e8ed355822600c24b3d2f0be46b573df

Added support for the Telit LN940 series cellular modules QMI interface.
QMI_QUIRK_SET_DTR quirk requied for Qualcomm MDM9x40 chipset.

Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>





Added support for the Telit LN940 series cellular modules QMI interface.
QMI_QUIRK_SET_DTR quirk requied for Qualcomm MDM9x40 chipset.

Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>







qmi_wwan: Added support for Fibocom NL668 series
2018-12-15T19:31:59+00:00

Jörgen Storvist
jorgen.storvist@gmail.com

2018-12-12T21:45:34+00:00

110a1cc28bc383adb4885eff27e18c61ddebffb4

Added support for Fibocom NL668 series QMI interface.
Using QMI_QUIRK_SET_DTR required for Qualcomm MDM9x07 chipsets.

Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>





Added support for Fibocom NL668 series QMI interface.
Using QMI_QUIRK_SET_DTR required for Qualcomm MDM9x07 chipsets.

Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>