linux.git/drivers/net/usb, branch v4.9-rc2

qmi_wwan: add support for Quectel EC21 and EC25

2016-10-13T14:05:06+00:00

The Quectel EC21 and EC25 need the same "set DTR" request as devices
based on the MDM9230 chipset, but has no USB3 support. Our best guess
is that the "set DTR" functionality depends on chipset and/or
baseband firmware generation. But USB3 is still an optional feature.

Since we cannot enable this unconditionally for all older devices, and
there doesn't appear to be anything we can use in the USB descriptors
to identify these chips, we are forced to use a device specific quirk
flag.

Reported-and-tested-by: Sebastian Sjoholm 
Signed-off-by: Bjørn Mork 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2016-09-23T10:46:57+00:00

r8152: disable ALDPS and EEE before setting PHY

2016-09-21T04:53:47+00:00

Disable ALDPS and EEE to avoid the possible failure when setting the PHY.

Signed-off-by: Hayes Wang 
Signed-off-by: David S. Miller

r8152: remove r8153_enable_eee

2016-09-21T04:53:47+00:00

Remove r8153_enable_eee().

Signed-off-by: Hayes Wang 
Signed-off-by: David S. Miller

r8152: move PHY settings to hw_phy_cfg

2016-09-21T04:53:47+00:00

Move the PHY relative settings together to hw_phy_cfg().

Signed-off-by: Hayes Wang 
Signed-off-by: David S. Miller

r8152: move enabling PHY

2016-09-21T04:53:47+00:00

Move enabling PHY to init(), otherwise some other settings may fail.

Signed-off-by: Hayes Wang 
Signed-off-by: David S. Miller

r8152: move some functions

2016-09-21T04:53:46+00:00

Move the following functions forward.

	r8152_mmd_indirect()
	r8152_mmd_read()
	r8152_mmd_write()
	r8152_eee_en()
	r8152b_enable_eee()
	r8153_eee_en()
	r8153_enable_eee()
	r8152b_enable_fc()
	r8153_aldps_en()

Signed-off-by: Hayes Wang 
Signed-off-by: David S. Miller

kaweth: remove obsolete debugging statements

2016-09-08T00:45:31+00:00

SOme statements in the driver only served to inform
which functions were entered. Ftrace can do that just as good without
needing memory. Remove the statements.

Signed-off-by: Oliver Neukum 
Signed-off-by: David S. Miller

lan78xx: mark symbols static where possible

2016-09-06T22:58:59+00:00

We get a few warnings when building kernel with W=1:
drivers/net/usb/lan78xx.c:1182:6: warning: no previous prototype for 'lan78xx_defer_kevent' [-Wmissing-prototypes]
drivers/net/usb/lan78xx.c:1409:5: warning: no previous prototype for 'lan78xx_nway_reset' [-Wmissing-prototypes]
drivers/net/usb/lan78xx.c:2000:5: warning: no previous prototype for 'lan78xx_set_mac_addr' [-Wmissing-prototypes]
....

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.

Signed-off-by: Baoyou Xie 
Signed-off-by: David S. Miller

hso: Convert printk to pr_

2016-09-06T20:29:51+00:00

Use a more common logging style

Miscellanea:

o Add pr_fmt to prefix each output message
o Realign arguments

Signed-off-by: Joe Perches 
Signed-off-by: David S. Miller