linux.git/drivers/net/usb, branch master Linux kernel source tree net: usb: kalmia: bound RX frame length in kalmia_rx_fixup() 2026-06-25T02:00:07+00:00 Maoyi Xie maoyixie.tju@gmail.com 2026-06-22T08:01:57+00:00 47b6bcef6e679593d2e86e04ee72c46a4e2f7139 kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or leave a short trailing remainder on a later loop iteration. Either case underflows usb_packet_length to about 65530. That bypasses the usb_packet_length < ether_packet_length truncation path. The device-supplied ether_packet_length, a le16 up to 65535 read from header_start[2], then drives a memcmp() and the following skb_trim() and skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10, which is 14000 bytes. That is an out of bounds read. Require both the start and end framing headers to be present before subtracting them, on every loop iteration. Fixes: d40261236e8e ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730") Cc: stable@vger.kernel.org Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/178211531778.2216480.12637613349790980750@maoyixie.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 *
KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that
skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can
deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or
leave a short trailing remainder on a later loop iteration. Either case
underflows usb_packet_length to about 65530.

That bypasses the usb_packet_length < ether_packet_length truncation path.
The device-supplied ether_packet_length, a le16 up to 65535 read from
header_start[2], then drives a memcmp() and the following skb_trim() and
skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10,
which is 14000 bytes. That is an out of bounds read.

Require both the start and end framing headers to be present before
subtracting them, on every loop iteration.

Fixes: d40261236e8e ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/178211531778.2216480.12637613349790980750@maoyixie.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: usb: lan78xx: restore VLAN and hash filters after link up 2026-06-23T21:50:06+00:00 Nicolai Buchwitz nb@tipi-net.de 2026-06-22T10:29:11+00:00 5c12248673c76f10ab900f70724c5da288c7efa5 Configured VLANs intermittently stop receiving traffic after a link down/up cycle, e.g. when the network cable is unplugged and plugged back in. VLAN filtering stays enabled but all VLAN-tagged frames are dropped until a VLAN is added or removed again. The LAN7801 datasheet (DS00002123E) states: "A portion of the MAC operates on clocks generated by the Ethernet PHY. During a PHY reset event, this portion of the MAC is designed to not be taken out of reset until the PHY clocks are operational" (section 8.10, MAC Reset Watchdog Timer) "After a reset event, the RFE will automatically initialize the contents of the VHF to 0h." (section 7.1.4, VHF Organization) Thus a link down/up cycle stops and restarts the PHY clock, resets the PHY-clocked portion of the MAC, and the RFE clears its VLAN/DA hash filter (VHF) memory. The VHF holds both the VLAN filter table and the multicast hash table, but the driver never reprograms either from its shadow copy once the link is back, so both stay empty. Reprogram the VLAN filter and multicast hash tables on link up. Reported-by: Sven Schuchmann <schuchmann@schleissheimer.de> Closes: https://lore.kernel.org/netdev/BEZP281MB224501E38B30BFDC4BD3D364D9E32@BEZP281MB2245.DEUP281.PROD.OUTLOOK.COM/T/#u Tested-by: Sven Schuchmann <schuchmann@schleissheimer.de> Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de> Link: https://patch.msgid.link/20260622102911.484045-1-nb@tipi-net.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Configured VLANs intermittently stop receiving traffic after a link
down/up cycle, e.g. when the network cable is unplugged and plugged back
in. VLAN filtering stays enabled but all VLAN-tagged frames are dropped
until a VLAN is added or removed again.

The LAN7801 datasheet (DS00002123E) states:

  "A portion of the MAC operates on clocks generated by the Ethernet
   PHY. During a PHY reset event, this portion of the MAC is designed to
   not be taken out of reset until the PHY clocks are operational"
  (section 8.10, MAC Reset Watchdog Timer)

  "After a reset event, the RFE will automatically initialize the
   contents of the VHF to 0h."
  (section 7.1.4, VHF Organization)

Thus a link down/up cycle stops and restarts the PHY clock, resets the
PHY-clocked portion of the MAC, and the RFE clears its VLAN/DA hash
filter (VHF) memory. The VHF holds both the VLAN filter table and the
multicast hash table, but the driver never reprograms either from its
shadow copy once the link is back, so both stay empty.

Reprogram the VLAN filter and multicast hash tables on link up.

Reported-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Closes: https://lore.kernel.org/netdev/BEZP281MB224501E38B30BFDC4BD3D364D9E32@BEZP281MB2245.DEUP281.PROD.OUTLOOK.COM/T/#u
Tested-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260622102911.484045-1-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2026-06-11T21:33:35+00:00 Jakub Kicinski kuba@kernel.org 2026-06-11T21:29:53+00:00 dad4d4b92a9b9f0edb8c66deda049da1b62f6089 Cross-merge networking fixes after downstream PR (net-7.1-rc8). Conflicts: drivers/net/ethernet/wangxun/txgbe/txgbe_aml.c f67aead16e85 ("net: txgbe: rework service event handling") 57d39faed4c9 ("net: txgbe: improve functions of AML 40G devices") net/rds/info.c 512db8267b73 ("rds: mark snapshot pages dirty in rds_info_getsockopt()") 6e94eeb2a2a6 ("rds: convert to getsockopt_iter") Adjacent changes: include/net/sock.h 1ee90b77b727 ("net: guard timestamp cmsgs to real error queue skbs") f0de88303d5e ("net: make is_skb_wmem() available to modules") Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Cross-merge networking fixes after downstream PR (net-7.1-rc8).

Conflicts:

drivers/net/ethernet/wangxun/txgbe/txgbe_aml.c
  f67aead16e85 ("net: txgbe: rework service event handling")
  57d39faed4c9 ("net: txgbe: improve functions of AML 40G devices")

net/rds/info.c
  512db8267b73 ("rds: mark snapshot pages dirty in rds_info_getsockopt()")
  6e94eeb2a2a6 ("rds: convert to getsockopt_iter")

Adjacent changes:

include/net/sock.h
  1ee90b77b727 ("net: guard timestamp cmsgs to real error queue skbs")
  f0de88303d5e ("net: make is_skb_wmem() available to modules")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
r8152: handle the return value of usb_reset_device() 2026-06-09T09:05:35+00:00 Chih Kai Hsu hsu.chih.kai@realtek.com 2026-06-04T09:22:47+00:00 19440600e729d4f74a42591a872099cf25c7d28a If usb_reset_device() returns a negative error code, stop the process of probing. Fixes: 10c3271712f5 ("r8152: disable the ECM mode") Signed-off-by: Chih Kai Hsu <hsu.chih.kai@realtek.com> Reviewed-by: Hayes Wang <hayeswang@realtek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260604092247.27158-450-nic_swsd@realtek.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
If usb_reset_device() returns a negative error code, stop the
process of probing.

Fixes: 10c3271712f5 ("r8152: disable the ECM mode")
Signed-off-by: Chih Kai Hsu <hsu.chih.kai@realtek.com>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260604092247.27158-450-nic_swsd@realtek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
rndis_host: enable power management for Telit LE310X1 2026-06-05T01:10:56+00:00 Shaoxu Liu shaoxul@foxmail.com 2026-06-02T09:05:28+00:00 3dfc7fe1d553b09bb02dca7ca808b6be87ed3dea Enable autosuspend support for Telit Cinterion LE310X1 RNDIS interface by selecting a driver_info variant with manage_power callback. This keeps power management scoped to the new Telit ID only, and avoids changing behavior for all existing RNDIS devices. Signed-off-by: Shaoxu Liu <shaoxul@foxmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/tencent_B7686B84CD4B76D76BB912FA6367FAC2CA05@qq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Enable autosuspend support for Telit Cinterion LE310X1 RNDIS interface
by selecting a driver_info variant with manage_power callback.

This keeps power management scoped to the new Telit ID only, and avoids
changing behavior for all existing RNDIS devices.

Signed-off-by: Shaoxu Liu <shaoxul@foxmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/tencent_B7686B84CD4B76D76BB912FA6367FAC2CA05@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rndis_host: add Telit LE310X1 RNDIS USB ID 2026-06-05T01:10:56+00:00 Shaoxu Liu shaoxul@foxmail.com 2026-06-02T09:05:27+00:00 c847ff789f0150a91022a75775267bd17cf70d06 Add a device match entry for Telit Cinterion LE310X1 RNDIS interface (VID:PID 1bc7:7030). This is a functional no-op and keeps using the generic rndis_info for now. Power-management behavior is handled in a follow-up patch. Signed-off-by: Shaoxu Liu <shaoxul@foxmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/tencent_F1AF1F5AD39C56485BD16C6DB2415E5B9508@qq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Add a device match entry for Telit Cinterion LE310X1 RNDIS interface
(VID:PID 1bc7:7030).

This is a functional no-op and keeps using the generic rndis_info for now.
Power-management behavior is handled in a follow-up patch.

Signed-off-by: Shaoxu Liu <shaoxul@foxmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/tencent_F1AF1F5AD39C56485BD16C6DB2415E5B9508@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: usb: qmi_wwan: add MeiG SRM813Q 2026-05-20T23:55:12+00:00 Jan Volckaert janvolck@gmail.com 2026-05-17T15:32:36+00:00 9758c11fc6c138a79a28a5659feeaa3abde7aa6a Add support for the Qualcomm Technology Snapdragon X35-based MeiG SRM813Q module. The module can be put in different modes via AT commands to enable/disable GPS functionality: MODEM - PPP mode(2dee:4d63): AT+SER=1,1 If#= 0: RMNET If#= 1: DIAG/ADB If#= 2: MODEM If#= 3: AT P: Vendor=2dee ProdID=4d63 Rev=05.15 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=1bd51f0e C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms NMEA mode(2dee:4d64): AT+SER=51,1 If#= 0: RMNET If#= 1: DIAG/ADB If#= 2: NMEA If#= 3: AT P: Vendor=2dee ProdID=4d64 Rev=05.15 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=1bd51f0e C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Signed-off-by: Jan Volckaert <janvolck@gmail.com> Link: https://patch.msgid.link/20260517153237.55995-2-janvolck@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Add support for the Qualcomm Technology Snapdragon X35-based MeiG SRM813Q
module.

The module can be put in different modes via AT commands
to enable/disable GPS functionality:

MODEM - PPP mode(2dee:4d63): AT+SER=1,1

If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: MODEM
If#= 3: AT

P:  Vendor=2dee ProdID=4d63 Rev=05.15
S:  Manufacturer=MEIG
S:  Product=LTE-A Module
S:  SerialNumber=1bd51f0e
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

NMEA mode(2dee:4d64): AT+SER=51,1

If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: NMEA
If#= 3: AT

P:  Vendor=2dee ProdID=4d64 Rev=05.15
S:  Manufacturer=MEIG
S:  Product=LTE-A Module
S:  SerialNumber=1bd51f0e
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

Signed-off-by: Jan Volckaert <janvolck@gmail.com>
Link: https://patch.msgid.link/20260517153237.55995-2-janvolck@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: usb: usbnet: use proper ep number macros 2026-05-15T01:19:03+00:00 Oliver Neukum oneukum@suse.com 2026-05-13T13:29:16+00:00 822d4a8e390a08ccfaf2abb347ae670b230b196f We have macros to retrieve endpoint numbers now. Use them. Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20260513132916.39896-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
We have macros to retrieve endpoint numbers now.
Use them.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260513132916.39896-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: usb: pegasus: replace simple_strtoul with kstrtouint 2026-05-14T01:06:56+00:00 Sajal Gupta sajal2005gupta@gmail.com 2026-05-09T09:51:48+00:00 1f8fd0fe56412db6a1a84317ce5856bdbef1fca3 simple_strtoul() is deprecated as it has no error checking. Replace it with kstrtouint() which returns an error code on invalid input, and add appropriate error handling. Also add a NULL check before parsing flags, since strsep() can set id to NULL if the input has fewer tokens than expected. Preserve the original behavior for a trailing colon by checking *id before parsing flags, so an empty string results in flags = 0 rather than an error. Signed-off-by: Sajal Gupta <sajal2005gupta@gmail.com> Link: https://patch.msgid.link/20260509095518.2640-1-sajal2005gupta@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
simple_strtoul() is deprecated as it has no error checking. Replace it
with kstrtouint() which returns an error code on invalid input, and add
appropriate error handling.

Also add a NULL check before parsing flags, since strsep() can set id
to NULL if the input has fewer tokens than expected.

Preserve the original behavior for a trailing colon by checking *id
before parsing flags, so an empty string results in flags = 0 rather
than an error.

Signed-off-by: Sajal Gupta <sajal2005gupta@gmail.com>
Link: https://patch.msgid.link/20260509095518.2640-1-sajal2005gupta@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2026-05-07T18:19:07+00:00 Jakub Kicinski kuba@kernel.org 2026-04-30T19:49:56+00:00 6a4c4656b0d2d4056a1f0c35442db4e8a5cf8021 Cross-merge networking fixes after downstream PR (net-7.1-rc3). Conflicts: net/ipv4/igmp.c 726fa7da2d8c ("ipv4: igmp: get rid of IGMPV3_{QQIC,MRC} and simplify calculation") c6bebaa744f7 ("ipv4: igmp: annotate data-races in igmp_heard_query()") https://lore.kernel.org/a7365e4873340f7a5e30411207de3bf9@kernel.org Adjacent changes: net/psp/psp_main.c 30cb24f97d44 ("psp: strip variable-length PSP header in psp_dev_rcv()") c2b22277ad89 ("psp: validate IPv4 header fields in psp_dev_rcv()") net/sched/sch_fq_codel.c f83e07b29246 ("net/sched: sch_fq_codel: annotate data-races from fq_codel_dump_class_stats()") 3f3aa77ff1c8 ("net/sched: add qstats_cpu_drop_inc() helper") net/wireless/pmsr.c 0f3c0a197309 ("wifi: nl80211: fix NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST usage") 410aa47fd9d3 ("wifi: cfg80211: allow suppressing FTM result reporting for PD requests") Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Cross-merge networking fixes after downstream PR (net-7.1-rc3).

Conflicts:

net/ipv4/igmp.c
  726fa7da2d8c ("ipv4: igmp: get rid of IGMPV3_{QQIC,MRC} and simplify calculation")
  c6bebaa744f7 ("ipv4: igmp: annotate data-races in igmp_heard_query()")
https://lore.kernel.org/a7365e4873340f7a5e30411207de3bf9@kernel.org

Adjacent changes:

net/psp/psp_main.c
  30cb24f97d44 ("psp: strip variable-length PSP header in psp_dev_rcv()")
  c2b22277ad89 ("psp: validate IPv4 header fields in psp_dev_rcv()")

net/sched/sch_fq_codel.c
  f83e07b29246 ("net/sched: sch_fq_codel: annotate data-races from fq_codel_dump_class_stats()")
  3f3aa77ff1c8 ("net/sched: add qstats_cpu_drop_inc() helper")

net/wireless/pmsr.c
  0f3c0a197309 ("wifi: nl80211: fix NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST usage")
  410aa47fd9d3 ("wifi: cfg80211: allow suppressing FTM result reporting for PD requests")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>