linux.git/drivers/net/usb/catc.c, branch v4.2

net: usb: Use eth__addr instead of memset

2015-03-03T22:01:36+00:00

Use the built-in function instead of memset.

Signed-off-by: Joe Perches 
Signed-off-by: David S. Miller

net: get rid of SET_ETHTOOL_OPS

2014-05-13T21:43:20+00:00

net: get rid of SET_ETHTOOL_OPS

Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone.
This does that.

Mostly done via coccinelle script:
@@
struct ethtool_ops *ops;
struct net_device *dev;
@@
-       SET_ETHTOOL_OPS(dev, ops);
+       dev->ethtool_ops = ops;

Compile tested only, but I'd seriously wonder if this broke anything.

Suggested-by: Dave Miller 
Signed-off-by: Wilfried Klaebe 
Acked-by: Felipe Balbi 
Signed-off-by: David S. Miller

drivers/net: delete non-required instances of include

2014-01-16T19:53:26+00:00

None of these files are actually using any __init type directives
and hence don't need to include .   Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

This covers everything under drivers/net except for wireless, which
has been submitted separately.

Signed-off-by: Paul Gortmaker 
Signed-off-by: David S. Miller

usb: Fix FSF address in file headers

2013-12-06T17:37:55+00:00

Several files refer to an old address for the Free Software Foundation
in the file header comment.  Resolve by replacing the address with
the URL  so that we do not have to keep
updating the header comments anytime the address changes.

CC: Oliver Neukum 
CC: Steve Glendinning 
CC: Oliver Neukum 
Signed-off-by: Jeff Kirsher 
Signed-off-by: David S. Miller

net:drivers/net: Miscellaneous conversions to ETH_ALEN

2013-10-02T21:04:45+00:00

Convert the memset/memcpy uses of 6 to ETH_ALEN
where appropriate.

Also convert some struct definitions and u8 array
declarations of [6] to ETH_ALEN.

Signed-off-by: Joe Perches 
Acked-by: Arend van Spriel 
Signed-off-by: David S. Miller

ethtool: fix drvinfo strings set in drivers

2013-01-07T05:06:31+00:00

Use strlcpy where possible to ensure the string is \0 terminated.
Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN
and custom defines.
Use snprintf instead of sprint.
Remove unnecessary inits of ->fw_version
Remove unnecessary inits of drvinfo struct.

Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller

USB: remove dbg() usage in USB networking drivers

2012-09-20T21:53:14+00:00

The dbg() USB macro is so old, it predates me.  The USB networking drivers are
the last hold-out using this macro, and we want to get rid of it, so replace
the usage of it with the proper netdev_dbg() or dev_dbg() (depending on the
context) calls.

Some places we end up using a local variable for the debug call, so also
convert the other existing dev_* calls to use it as well, to save tiny amounts
of code space.

Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: David S. Miller

USB: Disable hub-initiated LPM for comms devices.

2012-05-18T22:42:55+00:00

Hub-initiated LPM is not good for USB communications devices.  Comms
devices should be able to tell when their link can go into a lower power
state, because they know when an incoming transmission is finished.
Ideally, these devices would slam their links into a lower power state,
using the device-initiated LPM, after finishing the last packet of their
data transfer.

If we enable the idle timeouts for the parent hubs to enable
hub-initiated LPM, we will get a lot of useless LPM packets on the bus
as the devices reject LPM transitions when they're in the middle of
receiving data.  Worse, some devices might blindly accept the
hub-initiated LPM and power down their radios while they're in the
middle of receiving a transmission.

The Intel Windows folks are disabling hub-initiated LPM for all USB
communications devices under a xHCI USB 3.0 host.  In order to keep
the Linux behavior as close as possible to Windows, we need to do the
same in Linux.

Set the disable_hub_initiated_lpm flag for for all USB communications
drivers.  I know there aren't currently any USB 3.0 devices that
implement these class specifications, but we should be ready if they do.

Signed-off-by: Sarah Sharp 
Cc: Marcel Holtmann 
Cc: Gustavo Padovan 
Cc: Johan Hedberg 
Cc: Hansjoerg Lipp 
Cc: Tilman Schmidt 
Cc: Karsten Keil 
Cc: Peter Korsgaard 
Cc: Jan Dumon 
Cc: Petko Manolov 
Cc: Steve Glendinning 
Cc: "John W. Linville" 
Cc: Kalle Valo 
Cc: "Luis R. Rodriguez" 
Cc: Jouni Malinen 
Cc: Vasanthakumar Thiagarajan 
Cc: Senthil Balasubramanian 
Cc: Christian Lamparter 
Cc: Brett Rudley 
Cc: Roland Vossen 
Cc: Arend van Spriel 
Cc: "Franky (Zhenhui) Lin" 
Cc: Kan Yan 
Cc: Dan Williams 
Cc: Jussi Kivilinna 
Cc: Ivo van Doorn 
Cc: Gertjan van Wingerde 
Cc: Helmut Schaa 
Cc: Herton Ronaldo Krzesinski 
Cc: Hin-Tak Leung 
Cc: Larry Finger 
Cc: Chaoming Li 
Cc: Daniel Drake 
Cc: Ulrich Kunitz 
Signed-off-by: Sarah Sharp

USB: catc.c: remove err() usage

2012-04-25T19:37:47+00:00

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

Signed-off-by: Greg Kroah-Hartman

USB: convert drivers/net/* to use module_usb_driver()

2011-11-18T17:44:20+00:00

This converts the drivers in drivers/net/* to use the
module_usb_driver() macro which makes the code smaller and a bit
simpler.

Added bonus is that it removes some unneeded kernel log messages about
drivers loading and/or unloading.

Cc: Wolfgang Grandegger 
Cc: Samuel Ortiz 
Cc: Oliver Neukum 
Cc: Peter Korsgaard 
Cc: Petko Manolov 
Cc: Steve Glendinning 
Cc: Christian Lamparter 
Cc: "John W. Linville" 
Cc: Dan Williams 
Cc: Jussi Kivilinna 
Cc: Ivo van Doorn 
Cc: Gertjan van Wingerde 
Cc: Helmut Schaa 
Cc: Herton Ronaldo Krzesinski 
Cc: Hin-Tak Leung 
Cc: Larry Finger 
Cc: Chaoming Li 
Cc: Lucas De Marchi 
Cc: "David S. Miller" 
Cc: Roel Kluin 
Cc: Paul Gortmaker 
Cc: Jiri Pirko 
Cc: Pavel Roskin 
Cc: Yoann DI-RUZZA 
Cc: George 
Signed-off-by: Greg Kroah-Hartman