linux.git/drivers/net/sky2.h, branch master

skge/sky2/mv643xx/pxa168: Move the Marvell Ethernet drivers

2011-08-12T07:21:51+00:00

Move the Marvell Ethernet drivers into drivers/net/ethernet/marvell/
and make the necessary Kconfig and Makefile changes.

CC: Sachin Sanap 
CC: Zhangfei Gao 
CC: Philip Rakity 
CC: Mark Brown 
CC: Lennert Buytenhek 
CC: Stephen Hemminger 
Signed-off-by: Jeff Kirsher

sky2: support for new Optima chipsets (EXPERIMENTAL)

2011-07-08T15:53:33+00:00

This is a backport from the vendor driver of support for the newer Optima
(Prime and 2) chipsets. It also includes some setup changes for the
current Optima chip as well. The code and comments intentionally
mirror the vendor sk98lin driver to allow for easier maintenance.

Although this adds support for new chip id's, these chip id's are not
used by any of the current PCI device id's listed in the driver.
The patch is just to get initial infrastructure in place to handle them
when they come.

I don't have access to any of this hardware to actually test it yet.

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

sky2: use correct Inter Packet Gap at 10/100mbit

2011-07-08T15:53:33+00:00

This is another fix picked out of the vendor driver. The IPG value
in the serial mode register is supposed to be programmed differently
at lower speeds.

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

sky2: force receive checksum when using RSS on some hardware (v2)

2011-07-08T15:53:33+00:00

Found when reviewing the vendor driver. Apparently some chip versions
require receive checksumming to be enabled in order for RSS to work.

Also, if fix_features has to change some settings; put in message
in log in similar manner to netdev_fix_features.

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

net: sky2: convert to hw_features

2011-04-12T21:50:42+00:00

Caveats:
 - driver modifies vlan_features on HW VLAN TX changes
 - broken RX checksum will be reenabled on features change

Signed-off-by: Michał Mirosław 
Signed-off-by: David S. Miller

Fix common misspellings

2011-03-31T14:26:23+00:00

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi

sky2: convert to new VLAN model (v0.2)

2011-01-09T23:54:15+00:00

This converts sky2 to new VLAN offload flags control via ethtool.
It also allows for transmit offload of vlan tagged frames which
was not possible before.

Signed-off-by: Stephen Hemminger 
Reviewed-by: Jesse Gross 
Signed-off-by: David S. Miller

sky2: implement 64 bit stats

2011-01-01T22:02:24+00:00

This implements 64 bit statistics support and fixes races when reading
counter values. The PHY counters can only be accessed 16 bits at a time,
so they are subject to carry races.

NB:
  * TX/RX counters are maintained in software because the the hardware packet count
    is only a 32 bit value.

  * Error counters are really only 32 bit.

  * Old 32 bit counter fields in dev->stats still used for some
    software counters

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

drivers/net: use __packed annotation

2010-06-03T10:18:23+00:00

cleanup patch.

Use new __packed annotation in drivers/net/

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

sky2: use the DMA state API instead of the pci equivalents

2010-04-28T17:07:44+00:00

This replace the PCI DMA state API (include/linux/pci-dma.h) with the
DMA equivalents since the PCI DMA state API will be obsolete.

No functional change.

For further information about the background:

http://marc.info/?l=linux-netdev&m=127037540020276&w=2

Signed-off-by: FUJITA Tomonori 
Acked-by: Stephen Hemminger 
Signed-off-by: David S. Miller