linux.git/drivers/net/sky2.c, branch v2.6.27

sky2: Fix suspend/hibernation/shutdown regression with WOL enabled (rev. 2)

2008-08-14T08:27:44+00:00

On my test box with the Asus M3A32-MVP main board there is a
regression from 2.6.26 related to suspend, hibernation and
shutdown.  Namely, if Wake-on-LAN is enabled with
'ethtool -s eth0 wol g', the box hangs solid during all of these
operations, while executing either sky2_suspend(), or
sky2_shutdown().  This patch fixes it for me.

Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Jeff Garzik

[netdrvr] remove unnecessary #include

2008-08-14T08:26:38+00:00

The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  drivers/net/acenic.c
  drivers/net/bnx2x_link.c
  drivers/net/bnx2x_main.c
  drivers/net/cpmac.c
  drivers/net/gianfar_sysfs.c
  drivers/net/ipg.h
  drivers/net/ppp_mppe.c
  drivers/net/pppol2tp.c
  drivers/net/r6040.c
  drivers/net/sh_eth.c
  drivers/net/sky2.c
  drivers/net/tehuti.h
  drivers/net/typhoon.c

This patch removes the said #include .

Signed-off-by: Huang Weiyi 
Signed-off-by: Jeff Garzik

sky2: fix PM related regressions

2008-08-07T05:55:50+00:00

Fix the problems reported for 2.6.27-rc1 caused by over aggressive
power management. Turning clock off on PCI Express is problematic for WOL,
and when doing multi-booting.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Jeff Garzik

sky2: don't stop queue on shutdown

2008-07-23T04:53:40+00:00

It is unnecessary, to stop queue and turn off carrier in shutdown
routine. With new netdev_queue this causes warnings.

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

2008-06-19T23:00:04+00:00

Conflicts:

	net/mac80211/tx.c

sky2: version 1.22

2008-06-18T03:59:40+00:00

New version to reflect new hardware support

Signed-off-by: Stephen Hemminger 
Signed-off-by: Jeff Garzik

sky2: 88E8057 chip support

2008-06-18T03:59:39+00:00

Add support for Yukon 2 Ultra 2 chip set (88E8057) based on code in latest
version of vendor driver (sk98lin 10.60.2.3).  Untested on real hardware.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Jeff Garzik

sky2: use DEFINE_PCI_DEVICE_TABLE

2008-06-18T03:59:39+00:00

PCI device table can be marked as devinitconst by using macro.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Jeff Garzik

sky2: chip version printout

2008-06-18T03:59:38+00:00

Change how chip version is printed so that if an unknown version is detected
nothing breaks.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Jeff Garzik

sky2: phy setup changes

2008-06-18T03:59:38+00:00

Change the setup of the PHY registers on some chip ids. These changes
make the latest sky2 driver follow the vendor driver.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Jeff Garzik