linux.git/drivers/net/skge.c, branch master

skge/sky2/mv643xx/pxa168: Move the Marvell Ethernet drivers

2011-08-12T07:21:51+00:00

Move the Marvell Ethernet drivers into drivers/net/ethernet/marvell/
and make the necessary Kconfig and Makefile changes.

CC: Sachin Sanap 
CC: Zhangfei Gao 
CC: Philip Rakity 
CC: Mark Brown 
CC: Lennert Buytenhek 
CC: Stephen Hemminger 
Signed-off-by: Jeff Kirsher

skge: update version

2011-07-07T07:30:09+00:00

Update version number, and take "New" off the config information
since old sk98lin has been gone for a couple years.

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

skge: make support for old Genesis chips optional

2011-07-07T07:30:04+00:00

The GENESIS boards are really old PCI-X boards that are rare.
Marvell has dropped support for this hardware and there is no reason
for most users to have to have this code.

Rather than riddling code with ifdef's make one macro and let
the compiler do the dead code elimination.  This saves about 15%
of the text size.

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

add pci-id for DGE-530T

2011-07-07T07:29:32+00:00

See also: https://bugzilla.kernel.org/show_bug.cgi?id=38862

Reported-by: jameshenderson@ruggedcom.com

Signed-off-by: David S. Miller

skge: cleanup pci id table

2011-07-07T07:29:31+00:00

The PCI table was using mix of defines for device id and hard coded
hex values. This patch change it to all hex values. It also adds
comments based on the names provided in the vendor driver table.

There is NO CHANGE to the actual resulting table.

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

Add appropriate include for prefetch users

2011-05-23T04:41:57+00:00

After discovering that wide use of prefetch on modern CPUs
could be a net loss instead of a win, net drivers which were
relying on the implicit inclusion of prefetch.h via the list
headers showed up in the resulting cleanup fallout.  Give
them an explicit include via the following $0.02 script.

 =========================================
 #!/bin/bash
 MANUAL=""
 for i in `git grep -l 'prefetch(.*)' .` ; do
 	grep -q '' $i
 	if [ $? = 0 ] ; then
 		continue
 	fi

 	(	echo '?^#include '
 		echo .
 		echo w
 		echo q
 	) | ed -s $i > /dev/null 2>&1
 	if [ $? != 0 ]; then
 		echo $i needs manual fixup
 		MANUAL="$i $MANUAL"
 	fi
 done
 echo ------------------- 8\<----------------------
 echo vi $MANUAL
 =========================================

Signed-off-by: Paul 
[ Fixed up some incorrect #include placements, and added some
  non-network drivers and the fib_trie.c case    - Linus ]
Signed-off-by: Linus Torvalds

ethtool: cosmetic: Use ethtool ethtool_cmd_speed API

2011-04-29T21:03:01+00:00

This updates the network drivers so that they don't access the
ethtool_cmd::speed field directly, but use ethtool_cmd_speed()
instead.

For most of the drivers, these changes are purely cosmetic and don't
fix any problem, such as for those 1GbE/10GbE drivers that indirectly
call their own ethtool get_settings()/mii_ethtool_gset(). The changes
are meant to enforce code consistency and provide robustness with
future larger throughputs, at the expense of a few CPU cycles for each
ethtool operation.

All drivers compiled with make allyesconfig ion x86_64 have been
updated.

Tested: make allyesconfig on x86_64 + e1000e/bnx2x work
Signed-off-by: David Decotigny 
Signed-off-by: David S. Miller

ethtool: Use full 32 bit speed range in ethtool's set_settings

2011-04-29T21:03:00+00:00

This makes sure the ethtool's set_settings() callback of network
drivers don't ignore the 16 most significant bits when ethtool calls
their set_settings().

All drivers compiled with make allyesconfig on x86_64 have been
updated.

Signed-off-by: David Decotigny 
Signed-off-by: David S. Miller

ethtool: allow custom interval for physical identification

2011-04-15T04:15:49+00:00

When physical identification of an adapter is done by toggling the
mechanism on and off through software utilizing the set_phys_id operation,
it is done with a fixed duration for both on and off states.  Some drivers
may want to set a custom duration for the on/off intervals.  This patch
changes the API so the return code from the driver's entry point when it
is called with ETHTOOL_ID_ACTIVE can specify the frequency at which to
cycle the on/off states, and updates the drivers that have already been
converted to use the new set_phys_id and use the synchronous method for
identifying an adapter.

The physical identification frequency set in the updated drivers is based
on how it was done prior to the introduction of set_phys_id.

Compile tested only.  Also fixes a compiler warning in sfc.

v2: drivers do not return -EINVAL for ETHOOL_ID_ACTIVE
v3: fold patchset into single patch and cleanup per Ben's feedback

Signed-off-by: Bruce Allan 
Cc: Ben Hutchings 
Cc: Sathya Perla 
Cc: Subbu Seetharaman 
Cc: Ajit Khaparde 
Cc: Michael Chan 
Cc: Eilon Greenstein 
Cc: Divy Le Ray 
Cc: Don Fry 
Cc: Jon Mason 
Cc: Solarflare linux maintainers 
Cc: Steve Hodgson 
Cc: Stephen Hemminger 
Cc: Matt Carlson 
Acked-by: Jon Mason 
Acked-by: Ben Hutchings 
Signed-off-by: David S. Miller

skge: convert to hw_features

2011-04-08T03:15:49+00:00

just IP_CSUM.  This needs testing and so is not changed here.

Signed-off-by: Michał Mirosław 
Signed-off-by: David S. Miller